Product name:LANOLIN ANHYDROUS CAS:8006-54-0 Appearance: Light yellow colloid,Yellow cream Grade: Cosmetic and pharma grade Standard: USP, EP Features:Lanolin is a natural waxy substance derived from crude wool wax (also often referred to as wool grease or wool fat). It's obtained from the liquids resulting from scouring sheep wool. The wax is separated from the liquid using high speed centrifugation. It's then processed and refined in various stages, including: #Reducing free fatty acids, soap and water content #Eliminating contaminants #Deodorising and bleaching.
1. Chemical name: POTASSIUM CHLORIDE 2. M. F.: KCL 3. M. W.:74.5 4.Usage: In food industry, it is used as nutritional supplement, gelling agent, salt substitutes, yeast food. It is similar to edible salt to use as flavor enhancers for the agricultural product, aquatic product, animal-by product, fermentation product, condiment, can, fast good and so on. And also to use as enhance the potassium to prepare athletes beverage. 5.Packing: In 25kg composite plastic woven/paper bag with PE liner. 6.Storage and transport: It should be stored in a dry, ventilative and clean warehouse; kept away from moisture and heat and stored separately from poisonous substances. Handled with care, so as to avoid damage to packing bags.
1. Chemical name: POTASSIUM CHLORIDE 2. M. F.: KCL 3. M. W.:74.5 4.Usage: In food industry, it is used as nutritional supplement, gelling agent, salt substitutes, yeast food. It is similar to edible salt to use as flavor enhancers for the agricultural product, aquatic product, animal-by product, fermentation product, condiment, can, fast good and so on. And also to use as enhance the potassium to prepare athletes beverage. 5.Packing: In 25kg composite plastic woven/paper bag with PE liner. 6.Storage and transport: It should be stored in a dry, ventilative and clean warehouse; kept away from moisture and heat and stored separately from poisonous substances. Handled with care, so as to avoid damage to packing bags.
Camphor is a colorless or white crystal, granular or fragile. It has an irritating aroma.Chemical Abstracts Agency nimber is 76-22-2, formula is C10H1O6, shiny, hot and toxic. For the center,the spleen has a dispersive analgesic effect, dehumidifies and kill insects, treat itching, pain and toothache. The camphor tree is extracted from the branches and steams, leaves roots and granular crystals of the camphor family plants. Camphor has the effects of through-hole, stagnation of qi, opening,dehumidify, insecticidal and antipruitic and analgestic, and treatment of itching, trauma, scabies and other toothache symptoms. The main ingredients is pure camphor,which is a camphor compound. Function The main function of camphor is: kill insects and stop itching, detumescence and pain, clear the orifes, benefit stagnant qi, and remove the filth. It is often used in solid wood furniture or wardrobe to prevent mildew and kill insects. Application 1. The role of the central nervous system Camphor have excited central nervous system 2. The effects on the cardiovascular system 3. The local action Camphor spread on the skin has a mild stimulation and corrosion protection. Hard hair red inunction. 4. The antifungal effect In vitro experiment of wool sample microspore bacteria, red hair versicolor bacterium has a strong inhibitory effect, can completely inhibit its growth in the plate 5: Insect repellants
Type: Lithium Carbonate MF:LiC2CO3 Place of Origin: China Grade Standard:Industrial Grade Purity:99%MIN Appearance:Powder Industrial grade lithium carbonate is mainly used in steel continuous casting mold slag; in the electrolytic aluminum industry, adding industrial grade lithium carbonate can reduce the volatility, viscosity and melting point of the electrolyte, and improve the conductivity of the electrolyte, thereby reducing heat loss and improving Current efficiency, energy saving and prolonging the service life of electrolytic cells; used to prepare refrigerant lithium bromide; used to prepare lithium chloride as a raw material for metal lithium electrolysis; used to prepare high-purity grade lithium carbonate and grade lithium carbonate; Used in glass, ceramics, enamel and enamel, etc.
Items Standard Description Greyish-white powder Content(FeSO4) 86.0%-89.0% Copper 50ppm Solubility Slowly but freely soluble in water, very soluble in boiling water, practically insoluble in ethanol (96 per cent). It is oxidised in moist air, becoming brown. Identification A It gives the reactions of sulphates Identification B It gives reaction of iron Identification C It complies with the limits of the assay PH 3.0-4.0 Chlorides 300ppm Chromium 100ppm Ferricions 0.5 Manganese 0.1 Nickel 100 ppm Zinc100 ppm
Items Standard Appearance Dark red crystal or crystalline powder, with no smell and no taste; hygroscopicity. Identification A A361nm/A278nm:1.70-1.90 A361nm/A550nm:3.15-3.40 Identification B The retention time of major peak of the sample should be consistent with the standard solution. Identification C Positive Infrared Spectrum Infrared spectrum of the sample should be consistent with the reforence map. Loss on drying 10.0% Assay 97.0%~102.0% 78-lactocyanocobalamin1.0% 50-carboxyeyanocobalamin 0.5% 34-methylcyanocobalamin 2.0% 32-carboxyeyanocobalamin 1.0% 8-Epi-cyanocobalamin 1.0% Any other unidentified 0.5% Total impurities 3.0% Total aerobic bacteria count 1000cfu/g Molds Yeasts 100cfu/g E coli Negative Residual solvents Acetone 0.5%
Items Standard Description: White fine powder/Crystal Identification: Positive Melting point: 205.0-209.0 Acidity (PH): 2.4-3.0 Loss on drying: 0.2% max Residue on ignition: 0.10% max Sulphated ash: 0.10% max Heavy metals: 10ppm max Assay 99.0%~101.0% Clarity and colour of solution: Meet the requiremtns. Chloride content: 16.9%~17.6% Related substances: Meet the requiremtns. Organic volatile impurities: Meet the requiremtns.
Items Standard Identification The IR Absorption spectrum is concordant with the spectrum of reference standard. Test A (IR) Ratio:A245/A262,between 0.63 and 0.67 Test B (UV) 0.63-0.67 Assay(By HPLC) Not less than 98.5% W/W and not more than 101.5%W/W of C6H6N2O, calculated on the dried basis. Characteristics White crystalline powder Melting range 128-131 Loss on drying 0.5% Residue on ignition 0.1% Heavy metals 0.003%
Type: Food/Feed Additives Origin: China CAS No.: 83-88-5 AUCO No.: 829 Packing: 25kg drum" Items Standard Appearance Yellow or orange-yellow crystalline powder Identification Positive Assay 98.0% ~ 102.0% Specific rotation 115 ~135 Loss on drying 1.5% Residue on ignation 0.3% Lumiflavin 440nm Absorbance 0.025max
Product Name: Zinc Diricinoleate "Type: Cosmetic raw materials Origin: China CAS No.: 13040-19-2 AUCO No.: 524 Packing: 20kg drum" Items Standard Appearance Amber liquid with a special aroma of castor oil extract PH value 9.0~12.0 Absolute density 1.10-1.20 Solid content 50.0% Zinc diricinoleate content 28.0%~32.0%
Product Name: Zinc Diricinoleate "Type: Cosmetic raw materials Origin: China CAS No.: 13040-19-2 AUCO No.: 524 Packing: 20kg drum" Items Standard Appearance Amber liquid with a special aroma of castor oil extract PH value 9.0~12.0 Absolute density 1.10-1.20 Solid content 50.0% Zinc diricinoleate content 28.0%~32.0%
"Type: Food Additives Origin: China CAS No.: 22839-47-0 AUCO No.: 506 Packing: 25kg drum" Items Standard Appearance White granular Assay(On dry basis) 98.00-102.00% Specific Rotation +14.50~+16.50 Transmittance 95.0% Loss on drying 4.50% Residue on ignition 0.20% Heavy metal (As pb) 10ppm Lead 1ppm PH 4.50-6.00 Other related substances 2.0% Residual Solvents Meets the Requirements Organic volatile impurities Meets the Requirements 5-benzyl-3,6-dioxo-2-piperazineacetic acid 1.5%
Product Name: Stearic Acid "Type: Excipients Origin: China CAS No.: 57-11-4 AUCO No.: 943 Packing: 25kg bag" Items Standard Description White or almost white,waxy,flaky crystals,white or almost white hard masses,or white or yellowish-white powder Solubility Practically insoluble in water,soluble in ethanol(96 percent )and in light petroleum(50-75) Identification-A meet the requirements Identification-B Acid value:194-212 Acidity meet the requirements Freezing point 53-59 Iodine value(gI2/100g) 4.0 Nickel 1ppm Stearic acid 40.0%-60.0% Stearic acid and palmitic acid 90.0%