The talon fastener was designed to give the end user the ability to install a bolt where access to the rear of the bolt is unavailable for the placement of the nut (i.E. Walls, tanks, floors, etc).
For additional safety, the talon fastener has a built in, spring loaded locking device to prevent accidental release of the fastener after installation. This provides the end user with a visual indication when the talon fastener is properly engaged.
Having the ability to provide quick and secure attachment points, utilizing a single person, equates to savings by reducing material and labor cost.
Place of Origin Zhejiang, China
Brand Name GTM
Model Number GTM-RCS
Gearing Arrangement Bevel / Miter
Rated Power 30HP
Input Speed 540RPM
Color Red/Black
Ratio: 1:2.83
Rotary cutter gearbox with Straight bevelwith strengthen capability apply on rotary mower.HP range from 30HP to 75HP.
Gearbox housing use grey iron.
The gears and pinion use forging process.
We had our own inspection room to inspect the gear and housings.
Minimum order 200 Piece/Pieces
Capacity 2000á Piece/Pieces / Month.
Features:
1) alloy:3003 5052
2) core length:3mm to 12mm
3) aluminium thickness: from 0.026mm to 0.12mm
4) core high: from 4mm to 50mm.
Our Aluminium Honeycomb range can be supplied in a variety of conditions:
- Expanded or unexpanded.
- Full blocks or cut slices.
- Perforated or unperforated.
- Corrosion treated or untreated.
Some of the most widespread applications for Aluminium Honeycomb are as follows:
In the rail industry:
- Doors
- Floors
- Energy Absorbers/Bumpers
- Ceilings
- Partitions.
In the maritime industry:
- Commercial vessels and naval vessel bulkheads
- Wall ceiling and partition panels.
Other applications that are not transportation related:
- Clean room panels
- Exterior architectural curtain wall panels
- Air, water, fluid, and light directionalisation
- Heating, ventilation, air conditioning equipment and devices
- Skis and snowboards
- Energy absorption protective structures
- Electric shielding enclosures
- Acoustic attenuation.
Our corp. Was invested by kum kang corporation from korea.Base on the high technology from korea, we specialize in producing high quality butt-welding fittings and flanges such as 90 degrees elbows, 45 degrees elbows, straight tees, reudcing tees, concentric reducers, eccentric reducers, caps etc.To ansi, jis, ks, din, bs & en standards.Seamless fittings from 1/2" to 24" and welded fittings from 26" to 56".
Material:
Front side: aluminium roll-coated with pvdf
íííí core: anti-toxic low density polyethylene
Rear side: aluminium coated with chrome or polyester
Pvdf: polyvinylidene fluoride of ynar500
Coating layer: íípet and fc
Total thicknessú¦ 3mm. , 4mm., 1mm (standard)ú+ 2mm, 5mm, 6mm(as require)
Widthú¦ 1220mm, 1250mm (standard)ú+1270mm, 1500mm, 1550mm(as require)
Lengthú¦ 2440mmú¿standardú¬ú+ any as you require
Non-standard sizes
Our products catalogueíOo
Size 1/2¡íÑ¡íÑ~72¡íÑ¡íÑ
Thickness SCH10~SCH160 / STD / SGP / XS / XXS
Standard ASTM / JIS / DIN / BS / GB and so on
Material Carbon steel (seam & seamless) ASTM A234 A105 WPB
Packing Wooden cases, wooden pallets and as customers request
Product catalogue Elbows, Tees, Concentric and Eccentric reducers, Pipe Caps, Bends, Flanges and Socket Elbow.
Used in Chemical, petrochemical, gas, ship building, fire control industry and so on
Factory Location Mengcun County, Cangzhou City, Hebei province, China.
Certification ISO9001.
Wooden cases, wooden pallets and as customers request.
We are leading Stockist, suppliers and exporters of stainless steel sheets, coils, plates and tubes in India. We are in this business since 2004. We would like your company to know that we supply stainless steel sheets, coils, plates and tubes of grade 304, 304L, 316, 316L, 321, 410, 420, 431, 202, 201,etc along with other grades of Stainless steel to many leading industries. We supply S.S. Seamless pipe, ERW pipes, Wires and cables, pipe & pipefittings. We also supply square, hex & round bars.
We also specialize in high speed alloys, Inconel & Monel products, other cupro-nickel alloys, and other metals like aluminum, brass, copper, lead products like sheets, plates, pipes and tubes, wire and rods, pipe fittings and fasteners. We also provide billets and ingots.
Bevel gears (vertical installation), bearing and housing
(2)material:
Bevel gear is made of alloy steel scm415, and dealt with carburized hardening, it has high-steel and wear-resistance.Housing is made of cast iron
(5)42 kinds of different transmission directions, gear transmission efficiency upto 95%
(6)feature:
1.The compact design provides a small box size with a low weight
2.Save more energy as compared to worm gears and are available in varying gear ratios
(7) appliance:
Textile, food, medicine, printing, packaging and packing machines
(8) how to select right bevel gearbox on your request?
Model, transmission directions, speed ratio, rpm(revolution per minute)
A) nps: 1/8" to 10"
B) schedule: 5/5s, 10/10s, 20/20s, 40/40s, 80/80s, 120/120s, 160/160s, acc. To ansi b36.19/36.10
C) o. D.: 6 mm to 219 mm
D) w. T.: 0.5 mm to 25 mm
7. Length: max. 20 meters
8. Delivery conditions: annealled, picklinged and polished
9. Packing: seaworthy wooden cases/steel framed cases/simple packaging
10. Certificate: iso 9001:2000, ped, tuv.
6. Size:
A) nps: 1/8" to 10"
B) schedule: 5/5s, 10/10s, 20/20s, 40/40s, 80/80s, 120/120s, 160/160s, acc. To ansi b36.19/36.10
C) o. D.: 6 mm to 219 mm
D) w. T.: 0.5 mm to 25 mm
7. Length: max. 20 meters
8. Delivery conditions: annealled, picklinged and polished
6. Size:
A) NPS: 1/8" to 10"
B) Schedule: 5/5S, 10/10S, 20/20S, 40/40S, 80/80S, 120/120S, 160/160S, acc. To ANSI B36.19/36.10
C) O. D.: 6 mm to 219 mm
D) W. T.: 0.5 mm to 25 mm
7. Length: Max. 20 meters
8. Delivery conditions: Annealled, Picklinged and Polished
Range : 1/8"nb to 48"nb in sch: 5s, 10s, 40s, 80s, 10, 20, 40, std, 60, 80, xs, 100, 120, 140, 160, xxs available with nace mr 01-75
Type : seamless/welded/fabricated
Long radius bend û lr bend
Long radius bend, pig gable bend, induction bend with radius r=3d, 5d, 6d, 8d, 10d & 20d.
Minimum wall thinning rate and ovality
No wrinkles
Form :
Elbows in long & short radius in 45 deg, 90 deg, 180 deg.
Equal, unequal tee & barred tee.
Eccentric reducer & concentric reducer.
Caps & crosses.
Long & short stub end.
Sewage nipple & barrel nipple.
524906 Industrial And Automotive Suppliers
Short on time? Let Industrial And Automotive sellers contact you.