Wire Mesh, perforated sheets, Expanded metal mesh, stainless steel wire cloth & circles
Dear sir We are manufacturer in stainless steel instrument tube fitting Elbow, tee, socket, snubber, adapter,
Pipe support is for supporting slab & beam for construction.
There are 5 tips to protect stainless steel pipe. To let the stainless steel pipe with long lifetime.
PRODUCTS DESCRIPTION Components: The HIGH TENSILE ROCKFALL MESH system consists of four main components that are carefully coordinated with each other: 1. HIGH TENSILE ROCKFALL NET � It is made of high-tensile steel wire with an ultimate tensile strength of 1770 N/mm2. Detailed Product Description: 1. wire diameter:3mm 2. high tensile strength 1770Mpa 3. mesh size:80mm x 140mm 4. Mesh shape:diamond 5. Material:high tensile steel wire 6. Corrosion protection:super coating 7. Coating:150g/m2 8. Breaking load of single wire:12.5KN 9. Tensile strength:110KN/m HIGH� TENSILE� ROCKFALL� MESH mesh standard roll: Mesh edges knotted Roll width:2.3m-3.5m Roll length:110m-30m Weight:1.75kg/m2 2. SOIL OR ROCK NAILS Adapted to the local soil and rock static requirements, the HIGH TENSILE ROCKFALL MESH can be anchored in accordance with our dimensioning concept with commercial soil or rock nails.The main anchors of the system are installed in a grid typically from 6.6 to 16.4 ft (2.0 to 5.0m)horizontal and vertical spacing.Actual spacing depends upon the results of site analysis and modeling. Anchor consist of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm). Selfdrilling grout injection anchors are also permitted.Additional anchors may also be used to provide added support at boundaries and in low points and hollows. 3. SPIKE PLATES Rigid spike plates that are reinforced with ribbing ensure optimal load transmission from soil or rock anchors to the HIGH TENSILE ROCKFALL MESH. These plates are placed over the anchor heads and tightened to pre-tension the mesh onto the slope. The plates are galvanized and have dimensions of 13.0''*7.5"*0.4"(330mm*190mm*10mm). 4. CONNECTION CLIPS The connection clips high-strength steel wire connection clips enable mesh sections to be joined without overlapping and still guarantee one hundred percent transfer of forces. These claw are hot dip galvanized and consist of 0.25"(6mm) thick steel spiral. 5. SOIL OR ROCK NAILS Adapted to the local soil and rock static requirements, the HIGH TENSILE ROCKFALL MESH can be anchored in accordance with our dimensioning concept with commercial soil or rock nails.The main anchors of the system are installed in a grid typically from 6.6 to 16.4 ft (2.0 to 5.0m)horizontal and vertical spacing.Actual spacing depends upon the results of site analysis and modeling. Anchor consist of commercially available steel bars ranging from 1.0 to 1.25 ft (25 to 32mm). Selfdrilling grout injection anchors are also permitted.Additional anchors may also be used to provide added support at boundaries and in low points and hollows. Anping Xinghong Metal Wire Mesh Co., Ltd.� is a leading slope protection netting manufacturer and supplier in China. We provide high-quality and low-cost slope protection netting, or contact us to send your customized requirements, we will design and extend suitable for you wire mesh.
OEM Large Trash Bags With Drawstring Handle Factory Price 65 Gallon Recyclable Garbage Bag from Vietnam supplier Highly qualified Drawstring plastic bags on roll with cheap price and customized. The best quality Drawstring plastic bags with perfect service and policy in sale and after sale. Based on each demand, customers can order trash bags made from OPP, HDPE, LDPE, LLDPE, etc. Certainly, every resin material has different specification and uses. For example, HDPE makes bags crisp and slightly harder, LDPE makes bags soft and glossy, etc. Therefore, these Drawstring trash bags can contain big quantity goods inside. Thus, Drawstring plastic bags on roll is the best solution of packaging for supermarket, shop and household. In addition, Drawstring trash bags are produced by high speed cutting machine so the capacity is very high. People say trash bags are economical bags. Material: HDPE, LDPE, LLDPE Thickness: 15 200 micron Printing: up-to 8 colors/ 2 sides Packing: in bales or in carton as requested Delivery time: 15-20 days/ container upon receipt of LC or TT deposit
COMMODITY: Rail Steel (HMS) from Used Rails (Saudis do not allow selling the rails as scrap, so they have to melt the old rails and sell them as newly manufactured small pieces of look- a- like rails, and they can be used as scraps only, not as rails) Origin: Saudi Arabia Length: Buyer´s Option Port of Loading: Saudi port Price: $240/MT, CIF Quantity: 100,000 MT/ Month for one YEAR = 1,200,000 MT/Year Payment: By Irrevocable DLC, payable 100% at discharge port (Destination) Performance Bond: 2% of DLC value Port of Destination: ASWP (as long as the costs and payments of insurance and maritime freight are preserved without increases) Inspection: SGS or equivalent inspection company, which is active, available and in operation at the time of needing the service Validity: 8 working days, or 12 Calendar days PROCEDURES: SELLER ISSUES AN SCO TO BUYER TO BE SIGNED AND STAMPED AS ACCEPTANCE BUYER SENDS A LOI & POF, INCLUDING AN AUTHORIZATION NOTE TO HAVE ACCESS TO THE BEARER, TO VERIFY THE DOCUMENTS SUPPLIED, BETWEEN BANKS OF THE PARTIES (SELLER�´S BANK: BANK OF AMERICA SELLER, AFTER RECEIPT OF THE LOI AND POF, WILL INVITE THE BUYER AT SELLER'S COSTS TO VISIT THE YARD, WHERE THE MATERIAL IS AVAILABLE SELLER ISSUES FCO & DRAFT CONTRACT TO BE SIGNED AND STAMPED BY THE BUYER AS ACCEPTANCE THE REST OF THE PROCEDURE WILL BE REFLECTED AND DETERMINED IN THE CONTRACT IN REGULAR WAY
Material: highly abrasion-resistant spring steel or stainless spring steel. Opening size: 2.0 - 80.0 mm Wire diameter: 0.8 - 8 mm Installation instructions: the screen is installed with using of tensioning metallic bars into a separator over different types of hook strips, further with using of side bars and wedges, possibly is Hole type: square, rectangular and long slot. Surface treatment: galvanized or painted. Product description: Mainly used as screen mesh, it is widely used in many industries, such as mining screen, quarrying screen, the screen deck, screen wire for stone crusher; Vibrating screen; Application: * Safety grids (e.g. car industry, mechanical engineering, building industry) * Filling elements for gates and fences in buildings and gardens * Booth construction * Plant breeding * Pigeon barriers * Noise protection Material: High tensile screen cloth is commonly used in heavy duty applications for scalping and sizing of rocks,aggregates,limestone,etc. They are weaved in sizes to suite most vibrating screens and available in: * High Tensile Steel---Abrasion resistance * Stainless Steel---Corrosion resistance * Monel,Brass,etc---General applications Special sizes can be customized according to your requirements
Material: Natural polyethylene Dimemsion: 24.5 cm x 29 cm (Customized) Color:clear or customized; Usage: Protect your food from dirty and harm; MOQ: 10000~20000PCS
Specifications: 14x14 mesh sizes, 14x16, 16x16, 16x18, and 14x18 available. The standard width is 100cm (39 "), only available up to 60cm (23") of 90cm (36 "), 120cm (47") and 150cm (59 "). Colors to your requirement, such as black, gray, brown, white, yellow, blue, green, etc.. Packing: Inside, each roll with plastic film, 10 rolls per carton, or according to your requirement. Roll length: 30 meters / roll (33 yards). A 20ft container filled with load of about 90, 000 m2 (108, 000 and d2). Rollers minimum order 100 each width. Weaving: Galvanized after weaving or after weaving; plain weave. Features: Ant-mildew and corrosion. Color washable and attractive. Good resistance to weather. Stable size, good ventilation and light transmission.
Stainless steel is selected for their wear-resisting, heat-resisting, acid-resisting and corrosion resisting characteristics. Many different grades of stainless are used in wire cloth. T304 is the most common, but other are used in specific applications to take advantage of each grades unique properties. The wire mesh made of stainless steel is extensively used in mining , chemical industry, food industry and pharmaceutical industry. Wire Materials: SUS302, 304, 316, 304L, 316L. Characteristics: Square aperture, less rigid than plain weave, especially suitable for deforming, strong wire cloth due to ratio of wire diameter and aperture, it is mostly used for filtration less than 63 m . Typical Weaving Patterns: Plain weave, twill weave, dutch weave.
Material: * High quality iron rod * Stainless steel wire * Low carbon steel wire * PVC coated wire Surface Treatment: PVC, PE or PP powder coated, electro galvanized, hot dipped galvanized Weaving and Characteristic: The warp bended beforehand is welded with the weft with the surface treated by galvanizing, hot-galvanizing, PVC coating, PVC plating and they have such characteristics as beautiful appearance, smooth mesh, firm welding, good beforehand bending property, steadiness, good anticorrosion and resistance to aging. Application: Holland wire mesh are used in high quality wire rod as raw material, then welded panel or rolled fence. After galvanization and PVC dipped coating, it can resist the corrosive and ultraviolet radiation very strongly. Holland wire mesh is beautiful and solid, easy to transport and install, widely used for fencing or enclosure in the highway, railway, airport, housing area, garden, park, etc.
Material: PVC Coated Wire Processing: Weaving Product benefits: Anti-corrosion, age resistance, sunshine proof, etc. Wire Dia.: 3.0 x 2.3mm Mesh size: 15X8cm Border Wire Mesh is the ideal fence used as garden border or flower gratings.
Expanded metal mesh is also called pulled plate wire mesh. A rigid piece of metal that has been slit and drawn into an open mesh pattern in a single operation. It is stronger, lighter in weight and more rigid than the original base metal. Expanded metal mesh material are carbon steel plate, stainless steel, galvanized steel, aluminum, aluminum foil, lead, nickel plate, titanium, aluminum-magnesium alloy panels. Conventional mesh is formed in a diamond pattern. It has other pattern of hexagonal, round, triangle, scale-like opening. Features and benefits of expanded metal mesh: 1. The mesh is formed from a single piece of metal 2. The process is not wasteful of material 3. Higher strength-to-weight ratio than sheet metal 4. Anti-slip surface 5. Excludes and retains simultaneously 6. Premium reinforcement properties 7. Practical and effective screening 8. High efficient conductor 9. Super corrosion resistance Expanded metal mesh has a wide range of uses, graceful shapes , strong processing capability. A major advantage of expanded is that the mesh is formed from a single piece of material and the process is not wasteful and therefore cost effective. Main use: metal surface treatment and after processing, are widely used in large venues, both inside and outside decorative, aerospace, petroleum, chemical industry, metallurgy, medicine, paper making, filtration, breeding, packing, mechanical facilities, protection, handicraft manufacturing, high-grade speaker grille, childrenâ??s seat, baskets, basket, highway protection, and heavy machinery, boilers, oil mines, locomotives, tonner steamship, work platform, staircase, walkway. Also can be used for construction, highway and bridge as reinforced use. The term of expanded metal mesh: SWD (Short Way of the Diamond) is the distance from the middle of the bond on one side to the middle of the bond on the opposite side. LWD (Long Way of the Diamond) is the distance across the largest dimension of the diamond measured halfway between the diamonds. SWO (Short Way of the Opening) is the width of the opening of the shortest side of the diamond. SWO does not include the strand width, where SWD (Short Way of the Diamond) does. LWO (Long Way of the Opening) is the length of the opening of the longest side of the diamond. LWO does not include the strand width, where LWD (Long Way of the Diamond) does. Strand and Bond Expanded metal is composed of strands and bonds. Strands form the sides of the expanded metal openings. Bonds are where the strands intersect. In other words, the bond is where each diamond shaped opening is connected with the next opening. Thickness is the measurement from the top surface to bottom surface of the expanded metal piece. Expanded metal Roll: that the specific length and width of the wound into the roll of steel mesh. Expanded metal sheetï¼? The expanded metal that show specific length and width.
Material: Super quality low carbon steel wire. Weaving: Plain or twill woven wire cloth. Can be processed into filter discs of various sizes. Specialists in cut to size panels in all shapes including, squares, rectangles and circles in all materials and mesh sizes. Use: Black Wire Cloth is mainly used in filtration of rubber, plastic, petroleum and grains industry.
Material: Galvanized iron wire, or stainless steel wire. Property: Square Wire Mesh is made of selected low carbon iron wire with precision construction,uniform mesh, fine rust-resisting and durable function. Packing:In rolls,wrapped with waterproof paper then covered with hessian-cloth. Special packing may be arranged if necessary. Uses: Square Wire Mesh is widely used in industries and constructions to sieve grain powder,filter liquid and gas,for other purposes like safe guards on machinery enclosures. Besides,it is widely applied for the substitute of wood strips in making wall and ceiling. Specifications: Please refer to lists below for reference. Sizes not listed available at customers request. Assortments available: Crimped square wire mesh Standard square wire mesh Hot-dipped galvanized after woven square wire mesh Galvanized after woven square wire mesh Galvanized before woven square wire mesh Iron square wire mesh
Hexagonal wire netting is used for feeding chicken, ducks, gooses, rabbits and the fence of zoo,etc. Wire netting with hexagonal opening offers good ventilation and fencing uses. Hexagonal wire netting is made of twisting carbon steel wire, electro or hot dipped galvanized, then plastic coated, or plain. Materials: Low carbon steel wire, stainless steel wire or brass wire. Processing: Twisted before galvanized, weaving after galvanized. Electro galvanized, hot dipped, plastic-coated, stainless steel, PVC coated, etc. Weaving type avaliable include: Straight twist, reverse twist, double-direction twist.
s31803 s32205 duplex steel pipe SS Pipes Supplier, Stainless Steel Pipe, SS Pipe, SS Welded Pipe, SS ERW Pipes, ASTM A312 Stainless Steel TP Seamless Pipe, Stainless Steel Welded Pipe, SS EFW Pipe Exporter in China. 1.Material:TP304 TP304L TP316 TP316L TP347 TP347H TP321 TP321H TP310 TP310S,TP410 TP410S TP403,S31803/S32205 S32750 S32760 2.OD:6 mm-762 mm Size up to 30" Thickness:0.9mm -50mm SCH 5,SCH10,SCH10S,SCH40S,SCH80S,SCH 160,SCH XXS,SCH XS 3.Delivery Time: 30-45 Days 4.Certificate:ISO 9001-2008 5.Brand:CHENUI 6.Payment Terms:T/T,L/C 7.Application::Oil and Gas Processing,Chemical Plant,Petrochemical Plant,Shipbuilding,Offshore,Power Plant,Pressure Vessel,Sugar Plant,Water Treatment Plant ,Desalination Plant,Pulp and Paper Plant,Pharmaceuticals Plant Fertilizers Plant,Dairy and Food Processing� Product Description s31803 s32205 duplex steel pipe� Standard:GB/T 14976-2012,GB/T 13296,GB/T 1329,GB/T 9948,GB/T 5310,ASTM A312,ASTM A213,ASTM A269,JIS G 3459,JIS G 3463,JIS G 3448,DIN 17440,DIN17224,DIN 17458,EN 10216-5,ASTM A312/ASME SA312,NACE MR0175/0103 Material Grade:TP304 TP304L TP316 TP316L TP347 TP347H TP321 TP321H TP310 TP310S,TP410 TP410S TP403,S31803/S32205 S32750 S32760,1.4301,1.4307,1.4404,1.4401,1.4404,1.4571,1.4541. OD:6 mm-762 mm Size up to 30" Thickness:0.9mm -50mm� SCH 5,SCH10,SCH10S,SCH40S,SCH80S,SCH 160,SCH XXS,SCH XS Length:6 Meter Length,Single Random Length,Double Random Length,Plain End,Bevelled End,Client require length. Delivery Condition:Bright Annealing,Annealing Pickling,Cold Rolling,Cold Drawn,Polishing surface.180G, 320G, 400G Satin / Hairline,400G, 500G, 600G or 800G Mirror finish Tolerance:According to the Standard. Packing:Packed in Wooden Boxes,Plastic Bgas,Plastic Strips or as Customer Requests Testing:UT, ET, HT, RT,ect, and others according to the standard,or as the requests of the customers Certificate:ISO9001-2008. Delivery Time:30-45 Days,Depends on Quantity Inspection Test Reports: EN 10204 3.1 CETTIFICATE,SGS,BV,DNV,TUV,BV,LR INSPECTION REPORT.CHEMICAL COMPOSITION REPORT,Mechanical Reports,PMI Test Report,Visual Inspection Reports,Third Party Inspection Reports,Non Destructive Test Reports,Destructive Test Report
tp321 stainless steel pipe SS Pipes Supplier, Stainless Steel Pipe, SS Pipe, SS Welded Pipe, SS ERW Pipes, ASTM A312 Stainless Steel TP Seamless Pipe, Stainless Steel Welded Pipe, SS EFW Pipe Exporter in China. 1.Material:TP304 TP304L TP316 TP316L TP347 TP347H TP321 TP321H TP310 TP310S,TP410 TP410S TP403,S31803/S32205 S32750 S32760 2.OD:6 mm-762 mm� Size up to 30" Thickness:0.9mm -50mm� SCH 5,SCH10,SCH10S,SCH40S,SCH80S,SCH 160,SCH XXS,SCH XS 3.Delivery Time: 30-45 Days 4.Certificate:ISO 9001-2008 5.Brand:CHENUI 6.Payment Terms:T/T,L/C 7.Application::Oil and Gas Processing,Chemical Plant,Petrochemical Plant,Shipbuilding,Offshore,Power Plant,Pressure Vessel,Sugar Plant,Water Treatment Plant ,Desalination Plant,Pulp and Paper Plant,Pharmaceuticals Plant Fertilizers Plant,Dairy and Food Processing Product Description tp321 stainless steel pipe Standard:GB/T 14976-2012,GB/T 13296,GB/T 1329,GB/T 9948,GB/T 5310,ASTM A312,ASTM A213,ASTM A269,JIS G 3459,JIS G 3463,JIS G 3448,DIN 17440,DIN17224,DIN 17458,EN 10216-5,ASTM A312/ASME SA312,NACE MR0175/0103 Material Grade:TP304 TP304L TP316 TP316L TP347 TP347H TP321 TP321H TP310 TP310S,TP410 TP410S TP403,S31803/S32205 S32750 S32760,1.4301,1.4307,1.4404,1.4401,1.4404,1.4571,1.4541. OD:6 mm-762 mm� Size up to 30" Thickness:0.9mm -50mm� SCH 5,SCH10,SCH10S,SCH40S,SCH80S,SCH 160,SCH XXS,SCH XS Length:6 Meter Length,Single Random Length,Double Random Length,Plain End,Bevelled End,Client require length. Delivery Condition:Bright Annealing,Annealing Pickling,Cold Rolling,Cold Drawn,Polishing surface.180G, 320G, 400G Satin / Hairline,400G, 500G, 600G or 800G Mirror finish Tolerance:According� to the Standard. Packing:Packed in Wooden Boxes,Plastic Bgas,Plastic Strips or as Customer Requests Testing:UT, ET, HT, RT,ect, and others according to the standard,or as the requests of the customers Certificate:ISO9001-2008. Delivery Time:30-45� Days,Depends on Quantity Inspection Test Reports: EN 10204 3.1 CETTIFICATE,SGS,BV,DNV,TUV,BV,LR INSPECTION REPORT.CHEMICAL COMPOSITION REPORT,Mechanical Reports,PMI Test Report,Visual Inspection Reports,Third Party Inspection Reports,Non Destructive Test Reports,Destructive Test Report
tp316l stainless steel pipe SS Pipes Supplier, Stainless Steel Pipe, SS Pipe, SS Welded Pipe, SS ERW Pipes, ASTM A312 Stainless Steel TP Seamless Pipe, Stainless Steel Welded Pipe, SS EFW Pipe Exporter in China. 1.Material:TP304 TP304L TP316 TP316L TP347 TP347H TP321 TP321H TP310 TP310S,TP410 TP410S TP403,S31803/S32205 S32750 S32760 2.OD:6 mm-762 mm� Size up to 30" Thickness:0.9mm -50mm� SCH 5,SCH10,SCH10S,SCH40S,SCH80S,SCH 160,SCH XXS,SCH XS 3.Delivery Time: 30-45 Days 4.Certificate:ISO 9001-2008 5.Brand:CHENUI 6.Payment Terms:T/T,L/C 7.Application::Oil and Gas Processing,Chemical Plant,Petrochemical Plant,Shipbuilding,Offshore,Power Plant,Pressure Vessel,Sugar Plant,Water Treatment Plant ,Desalination Plant,Pulp and Paper Plant,Pharmaceuticals Plant Fertilizers Plant,Dairy and Food Processing Product Description tp316l stainless steel pipe Standard:GB/T 14976-2012,GB/T 13296,GB/T 1329,GB/T 9948,GB/T 5310,ASTM A312,ASTM A213,ASTM A269,JIS G 3459,JIS G 3463,JIS G 3448,DIN 17440,DIN17224,DIN 17458,EN 10216-5,ASTM A312/ASME SA312,NACE MR0175/0103 Material Grade:TP304 TP304L TP316 TP316L TP347 TP347H TP321 TP321H TP310 TP310S,TP410 TP410S TP403,S31803/S32205 S32750 S32760,1.4301,1.4307,1.4404,1.4401,1.4404,1.4571,1.4541. OD:6 mm-762 mm� Size up to 30" Thickness:0.9mm -50mm� SCH 5,SCH10,SCH10S,SCH40S,SCH80S,SCH 160,SCH XXS,SCH XS Length:6 Meter Length,Single Random Length,Double Random Length,Plain End,Bevelled End,Client require length. Delivery Condition:Bright Annealing,Annealing Pickling,Cold Rolling,Cold Drawn,Polishing surface.180G, 320G, 400G Satin / Hairline,400G, 500G, 600G or 800G Mirror finish Tolerance:According� to the Standard. Packing:Packed in Wooden Boxes,Plastic Bgas,Plastic Strips or as Customer Requests Testing:UT, ET, HT, RT,ect, and others according to the standard,or as the requests of the customers Certificate:ISO9001-2008. Delivery Time:30-45� Days,Depends on Quantity Inspection Test Reports: EN 10204 3.1 CETTIFICATE,SGS,BV,DNV,TUV,BV,LR INSPECTION REPORT.CHEMICAL COMPOSITION REPORT,Mechanical Reports,PMI Test Report,Visual Inspection Reports,Third Party Inspection Reports,Non Destructive Test Reports,Destructive Test Report
