All trench mesh sheets are supplied in 6m lengths at varying width increasing from 200mm in 100mm increments. Trench mesh is used for both footings 2 layers of trench mesh and slab edge thickening one layer trench mesh with sheet mesh over. You should normally allow 65mm minimum to the edges and bottom of the footings using plastic bar chairs or trench mesh supports to keep the mesh in place.
Trench mesh is designated as x-L8TM, x-L11TM or x-L12TM. The x is the number of main bars.
All trench mesh sheets are supplied in 6m lengths at varying width increasing from 200mm in 100mm increments. Trench mesh is used for both footings 2 layers of trench mesh and slab edge thickening one layer trench mesh with sheet mesh over. You should normally allow 65mm minimum to the edges and bottom of the footings using plastic bar chairs or trench mesh supports to keep the mesh in place.
Trench mesh is designated as x-L8TM, x-L11TM or x-L12TM. The x is the number of main bars.
3-L8TM has three bars, which are 8 mm in diameter.
4-L11TM has four bars, which are 11 mm in diameter.
Trench Mesh is made specifically for use in residential footing trenches. Made from grade D500L ribbed reinforcing wire, Trench Mesh is made using a variety of longitudinal wires up to 12mm diameter.
Cross wires are â?¯at 300mm centres. Sheets are made in 6m lengths, with widths varying from depending on the number of longitudinal wires. The longitudinal wires are at 100mm centres. The product code, for example L8TM3, refers to the ductility grade (L), diameter of main wires (8) and the number of main wires (3). Other sizes are available, contact us for more information.
Application:
1. Home building fence
2. Home garden fence
3. Residential fence
4. Home animal fence
5. Home outdoor fence
6. Fences In Parks, Zoos and nature reserves
1.Material: low carbon steel wire
2.Coated: electric galvanizing, hot-dipped galvanizing, PVC spraying and PVC coating
3.Color: Standard colors are Green RAL6005 and Black RAL9005. Dark Green,Yellow ,etc .Other colors are available on request.
4.Features: corrosion resistance, aging resistance, sunshine resistance and weather resistance
According to different material and surface treatment. There is Hot-dip Galvanized Welded Wire Mesh, electro Galvanized Welded Wire Mesh, Re-drawing Welded Wire Mesh, PVC coated Welded Wire Mesh.
According to different produce process. There is Welded Wire Fence rolls, Welded Wire Mesh Panel and Welded Mesh Fence Panels.
Here is details of 1'' Welded Wire Mesh:
Material: Low carbon Steel Wire, Galvanized Iron Wire, re-drawing Iron Wire.
Telï¼?86-0311-89277939
Email address: sales23@maishimfg.com
marine grade 316 11 mesh 0.9 mm security mesh used near the sea
MAISHI Wire Mesh Manufacture Group is a professional wire mesh manufacturer. And security screen mesh is our main product, which has passed a series Australian tests.We use marine grade 316 wire to produce the mesh. Welcome to contact us if you need marine grade security mesh.
[ Material ] Stainless steel 316
It is high tensile AISI316 stainless steel wire, tolerance(+/-0.01mm), tensile strength is more than 900Mpa (900N).
The holes are square and the wires are very strong (not sliding), screen surface is flattened after we weave the wires to mesh screen.
Characteristic of security screen wire mesh:
Safe: Not easy to cut and break pass AS5039-2008
Private live: No one can peep at room
Beautiful: Gorgeous surface
Durable: More than 10years Warranty pass AS2331.3.1-2001
Mesh Count: 11mesh, other specification as follows is also avaliable.
[ Features of security screen mesh]
Excellent flact surface
High tension,Equal aperture and dia
Corrosion resistance,easy to install
10 years not to corrode,face or bubble
Black color filter 60% of UV rays
Product contact email: sales23@maishimfg.com
Marine Grade 316 Stainless Steel Epoxy Coating Security Screen Mesh
Maishi Group supply Security Doors and window. Security mesh can be used on window and doors to make your family far away from danger. Our mesh is made from high tensile stainless steel, woven into a fine mesh, it is hard to cut and break. And it has been passed a series Australia tests, you can believe our quality.
[ Material ] Stainless steel 316
It is high tensile AISI316 stainless steel wire, tolerance(+/-0.01mm), tensile strength is more than 900Mpa (900N).
The holes are square and the wires are very strong (not sliding), screen surface is flattened after we weave the wires to mesh screen.
Characteristic of security mesh:
Safe: Not easy to cut and break pass AS5039-2008
Private live: No one can peep at room
Beautiful: Gorgeous surface
Durable: More than 10years Warranty pass AS2331.3.1-2001
Mesh Count: as follows
[ Features of security mesh]
Excellent flact surface
High tension,Equal aperture and dia
Corrosion resistance,easy to install
10 years not to corrode,face or bubble
Black color filter 60% of UV rays
[ Maishi security mesh passes the below tests ]
1) Knife Shear Test(AS5039-2008)
2) Anti-Jemmy Test(AS509-2008)
3) Pull Test(AS5039-2008)
4) Durable more than 10 years(AS2331.31-2001)
5) 3006 Hour Salt Spray Tests, 534 hours UV Test
We are China's top wire mesh manufacturer, our products are production prices, no middlemen to earn the difference! I hope that you can contact the opening email of our article.
Application
It is applied to the stainless steel pipeline system, which is used for milk ,food, juice, beer, pharmacy, etc.
Technical Data
Availably standard SMS,DIN,3A,IDF,RJT, BS, ISO
Material Quality SS304,SS304L,SS316,SS316L
Specification 1"-6",DIN 25-150
Available Connection Welding ends, triclamp ends, union ends, male ends
Available Polishing 180 Grit ,240 Grit, 320 Grit ,420 Grit,Unpolished
Type of elbow 45 degree,90 degree,180 degree, U type
Available Thickness 1.5MM,1.65MM,2MM,2.5MM,3MM
Sorts of elbow With/Without straight ends
Temperature Range -20degree Celsius~135degree Celsius
Advantage of products
1 Each kind of products has strong corrosion resistance and over-long service lifetime
2 DEYI accessories are easy to be installed
3 Problem-free welding and assembly and highest possible strengths.
4 Welding requirements: aware of the constantly increasing demands for quality of welding. In accordance with these demands, all our weld and fittings meet the highest of standard. The reducers have cylindrical welding ends and are available for all tube combinations, ensuring you that the right diameter and wall thickness for your process.
Packing &Shippinginformation of the 3.5" Stainless Steel Clamped 4way Equal Cross Pipe Fittings.
Port: Shanghai Port or Ningbo Port,China
MOQ: 5piece
Supply ability: 10,000 pieces/month
Payment terms: T/T,Western Union, Paypal, L/C
Packaging:Shrink Wrap-Carton Case-Exporting Plywood Case
Delivery time:Depends on quantity
Shipping mode:By sea,by air,by express
Our Service
1. Samples: Buyer bear the air fee, but this fee will be reduced from order directly
2. Delivery: Never delay delivery time
3. Ensure material pure
4. After Sales: Please contact our After-sales service department in time within 30days after you received the cargo
Process Please provide the copy of Sales Contract and describe the problems appeared.
Slight problem Please send the proof to our After-Sales Department, we will reply within two days.
Serious problem
a. We will dispatch our Quality and Problems Appraisers to make a confirmation
b. Have a negotiation of the compensation and sign agreements
c. Our After-Sales Department will perform the duties as the agreements
Replacement Free replacement if there is any quality problem
1. Eight years of export experience
2. Pass SGS Certificate
3. Experienced R&D Department
4. Reliability
5. Reputation
6. Buyer's Specifications Accepted
Material: 201,202,302, 304, 304L, 316, 316L,321 and 430 etc
Weave Type: Plain weave, Twilled weave, Plain dutch weave, Twilled dutch Weave, Reverse dutch weave.
Performance : Corrosion-resisting, Wear-resisting, Tear-resisting.
Uses: Mainly used for Separation and Flitration, extensively used in petroleum, chemical industry,
enviroment protection, mine, airspace, paper-making, electronic, metallurgy etc.
Special size and specification are available according to customers requirment.
Normal mesh size:
Plain weave: 0.5X0.5mesh to 635X635 mesh;
Twill weave:20x20mesh to 400x400mesh;
Plain dutch weave:10X64mesh to 80X700mesh;
Twill dutch weave:20x250mesh to 400X2800mesh;
Reversed dutch weave: 48x10mesh to 720x150mesh.
Wire diameter:0.025mm-1.8mm.
Roll width:1.0m,1.2m,1.5m,1.8m,2.0m etc. any width available at request.
Roll length:30m or 50m,any length available at request.
Sample:Free sample sent on request.
Factory:
Hebei Maishi Wire Mesh Manufacture Co.,Ltd ,connected with production of stainless steel woven wire mesh and netting, since 1992, in China.
The machinery and apparatus used in production process fully based on the high computer technology, so it is accepted as the only company
capable of having TSE ( Chinese Standard Institution ) certificate and ISO 9001:2008, all of our produce according ISO9044:1999, JIS G 3555:2004, and ISO3310/BS410 etc.
We use imported precision slitting machine,can article points precision mesh, plain weave, twill weave.
Our mainly market of stainless steel wire mesh/cloth in Germany, UK, Italy, Turkey, Korea, Thailand, Brazil, Mexico, Argentina, Egypt, Ghana and other parts in the world. We have good reputation in the world with the quality and price. You are welcome to send by email or fax your inquiry for trial orders.
Maishi supply high quality which has smooth and bright surface,high hardness,high temperature resistance,non-deformation features..
Payment:
100%T/T in advance if order amount less thanUSD10000.00, 30%paid in advance and 70%paid before shipment if order amount more than USD10000.00.
L/C payment is workable.
Any other payment term can be negotiatory
Our tenet:top credit,quality goods,favourable price,excellent service
Guarantee:Goods can be compensated and returned if you are not satisfied with the quality.
We welcome the need to communicate with our sales staff specifications and meshes, we will be happy to cooperate with you.
We provide complete standard of pipe fittings ( tube fittings) in different standard.
Including BPE pipe fittings, I-line pipe fittings, butt welded pipe fittings, beveal seat fittings, Q-line pipe fittings.
We provides the sanitary elbows as followings details
Made from welded pipe or seamless pipe as per the requirement
Both 45°elbow and 90° elbow are available, short type or long type is available
Mirror polished or matte polished are both available
Materials are traced
Max. Pressure: 10bar
Connection end: welded, clamped, threaded, union type,
Standard: DIN, SMS, ISO, 3A, BPE, IDF, AS, BS
Size: DN10-300, 1/2"-10"
Material: SS304, SS316L
Made from welded pipe or seamless pipe as per requirement
Surface finish: Mirror, matt type as per requirement
Inside Ra 0.4, Out side Ra 0.8
Roundness, thickness equality to meet international food grade standard
For elbow, tee, reducers... After products are finished, we recheck the roundness, thickness uniformity, Ra value, sand hole, surface uniformity. So after these inspection, the fittings are of excellent quality.
Our sanitary elbows are widely used for food, beverage, Dairy , bio-tech, pharmacy industries.
Quality guarantee of 3 years
ISO 9001, FDA, SGS approved materials
7-10 days fast delivery on urgent requirements
10 years' Rich exporting experience to make you easy and happy with custom work
We also supply sanitary butterfly valve, ball,valve, sanitary flow diversion valve, sanitary CPM valve, sanitary regulating control valve, sanitary diaphragm valve, sanitary ball valve, sanitary sampling valve, sanitary safety valve, sanitary pressure reducing valve
sanitary elbow, sanitary tee, sanitary reducers, sanitary unions, sanitary clamp, sanitary ferrule, sanitary pipe clamps,sanitary cleaning ball, sanitary sight glass, sanitary manway manhole cover, sanitary strainer, filters, and other sanitary pipe fittings....
Welcome to check our other products.
carbon steel plates and round bars
hot rolled and forged machined and peeled and grinded carbon steel round bar and flat bar
Grade: C45 C55 C60 S355J2 1045 S20C S45C S50C S55C
Standard: AISI, ASTM, BS, DIN, GB, JIS
Technique: Forged
Process: EAF+LF+VD
Delivery time: 60~70 days
Packing: Standard export packing
Size: DIA100~1000MM, 100~700X200~2000MM
SPECIFICATIONS:
Commodity: Copper Wire Scrap / and Mill-berry Scrap 99,97 % min. without Radiation, Heifer, Radioactive free.
Purity: Min 99.97 Max 99.99 %
Contract Period: 12 Months
Payment method: Irrevocable, Non -Transferable, & renewable SBLC + MT 760 for First 3 Months, After that 9 Months without any bank instrument Seller's will shipment payment after SGS Inspection at Buyers destination Port Via MT 103.
Payments conditions: The Full Payment at the Buyers destination Port, Against of Shipment Policy of Lading, Invoice, Origin Certificate, Insurance Certificate, SGS Inspection Certificate.
Delivery Terms: CIF, within 3 to 4 weeks.
Inspection: SGS.
Destination Port: Any safe port
TERMS AND CONDITIONS:
Seller sends draft contract to Buyer to fill in, signed and resends to Seller to countersign.
Buyer issues 100% Fully Funded Irrevocable, Operative, Non - Transferable, Assignable, Unconditionally, SBLC + MT 760 within five (5) working days after the contract is signed by both parties.
Payment method shall be via MT103 or T/T to Seller within five (5) working days after receipt, quality specification, satisfactory Q & Q, inspection report certificate at port of destination.
