Epson I3200-A1 Water-based Printhead(Unlocked) To be used with: Epson WF-4720 Manufacture: Epson Attention: 1. The printhead is required to be installed by professional persons. 2. Due to the nature of Printer Parts and the many factors that go into installing them, we do not accept returns or give refunds on electronic or service parts. Once the package is delivered, it is the customer s responsibility to check the package for damage. If there is any visible damage on the package, please refuse the shipment and email us to purchase@dutaprinting.com 3. Please seriously pay attention on information of printhead model while purchasing from us. Once received your item, please inspect if the printhead matches up with the model you required.If you have any problems, it is very important that contact us as soon as possible before installing it onto machine. Please be aware that we don t accept any return and refund once the printhead is installed on the machine.
Price : USD 807 Min Order : 1 Pcs Lead Time : 3 5 Days Port : CIF / Kualanamu International Airport Terms : T / T, Western Union, Paypal, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock Address : Jl. S. Parman No.211 Medan,Sumatera Utara 20112 IndonesiaCity/Zip Code : Medan, 20112 Province : Sumatera Utara Country : INDONESIA
Toshiba CE4W1 Printhead Unique technology of jetting multiple drops onto a single dot creates wide range of grayscale with minimum 6 pl to maximum 90 pl (15 drops) per dot. Higher driving frequency (especially at small drops) CA4 realizes 28KHz at 1drop (6pL) mode, which is twice as fast as the existing CA3 using the same interface. Printer Compatibility: TOSHIBA Printer Remarks: Original INDOELECTRONIC.COM sells Printer and Part Printer : Cannon, Epson, Konica, Mimaki, Mutoh, Ricoh, Roland, Seiko, Spectra, Xaar, etc. Buy TOSHIBA CE4W1 PRINTHEAD at indoelectronic with cheap price, best quality guaranted, international warranty. Price : USD 1,225.00 Min Order : 1 Pcs Lead Time : 6 9 Days Port : CIF / Kualanamu International Airport Terms : T / T, Western Union, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock Address : Jl.S.Parman No.21/272 City/Zip Code : Medan, 20151 Province : Sumatera Utara Country : INDONESIA
INDOELECTRONIC.COM sells Printer and Part Printer : Cannon, Epson, Konica, Mimaki, Mutoh, Ricoh, Roland, Seiko, Spectra, Xaar, etc. Buy EPSON R1900 / R2000 / R2880 PRINTHEAD (DX5)-F186000 at indoelectronic with cheap price, best quality guaranted, international warranty. Price : USD 444.00 Min Order : 1 Pcs Lead Time : 6 9 Days Port : CIF / Kualanamu International Airport Terms : T / T, Western Union, Money Gram Shipment : FedEx, DHL, UPS Product : Ori and Ready in stock Address : Jl.S.Parman No.21/272 City/Zip Code : Medan, 20151 Province : Sumatera Utara Country : INDONESIA
Printing Method Printing Technology HP Thermal Inkjet Maximum Resolution 2400 x 1200 dpi Ink Droplet Size 4.0 pl: Light Cyan, Light Magenta, Light Gray, Photo Black, Gloss Enhancer, Gray 6.0 pl: Magenta, Yellow, Matte Black, Red, Green, Blue Ink Type HP Vivera pigment ink Ink Cartridges Blue, Green, Magenta, Red, Yellow, Gray, Photo Black, Matte Black, Light Cyan, Light Gray, Light Magenta, Gloss Enhancer Ink Cartridge Capacity 4.40 oz (130 ml) Ink Cartridge Configuration 6 printheads: 1: light magenta & light cyan printhead 2: magenta & yellow printhead 3: photo black & light gray printhead 4: blue & green printhead 5: matte black & chromatic red printhead 6: gloss enhancer & gray printhead Number of Nozzles 2112 per printhead 1056 per color 12,672 total Performance Print Speed D/A1 Color Best (Glossy): 12.4 min/page D/A1 Color Normal (Glossy): 7.2 min/page D/A1 Color Draft (Coated): 2 min/page D/A1 Color Normal (Coated): 3.8 min/page Input Buffer 256 MB Storage Capacity 80 GB hard drive Print Archival Life ~ 200 years fade resistance Waterproofing Water-resistant on select HP creative and specialty media
Printing Method Printing Technology HP Thermal Inkjet Maximum Resolution 1200 dpi Printer Language Adobe PostScript 3, Adobe PDF 1.6, TIFF, JPEG, HP PCL 3 GUI Ink Droplet Size 4.0 pl: Light cyan, light magenta, light gray, photo black, gray, gloss enhancer 6.0 pl: Magenta, yellow, matte black, chromatic red, green, blue Ink Type HP Vivera pigment inks Ink Palette Blue, green, magenta, chromatic red, yellow, gray, photo black, matte black, light cyan, light gray, light magenta Ink Cartridge Configuration 6 printheads: 1: light magenta & light cyan printhead 2: magenta & yellow printhead 3: photo black & light gray printhead 4: blue & green printhead 5: matte black & chromatic red printhead 6: gloss enhancer & gray printhead Number of Nozzles 2112 per printhead (1056 nozzles per color) Print Speed Best (Glossy): 12.4 min/page on D/A1 Normal (Glossy): 7.2 min/page on D/A1 Normal (Coated): 3.8 min/page on D/A1 Draft (Coated): 2.0 min/page on D/A1 Input Buffer 256 MB Storage Capacity 80 GB hard disk Print Archival Life Approximately 200 years fade resistant Waterproofing Water-resistant on a range of HP creative and specialty media
Printing Method Printing Technology HP Thermal Inkjet, Scalable Printing Technology Print Resolution Input: 1200 x 1200 dpi Optimized: Up to 2400 x 1200 dpi Print Speed Best Glossy Media: 15 min/page (A1/D) Normal Glossy Media: 7.9 min/page on A1/D Normal Coated Media: 4.2 min/page on A1/D Draft Coated Media: 2 min/page on A1/D Ink Type HP Vivera pigment ink Ink Palette Cyan, magenta, yellow, light cyan, light magenta, matte black, photo black, light gray Ink Droplet Size 4 pl: light cyan, light magenta, light gray, photo black 6 pl: cyan, magenta, yellow, matte black Number of Nozzles Per Color: 1056 nozzles Total: 8448 nozzles Line Accuracy �±2% Lightfastness ~200 years fade resistance Water Resistance Water-resistant on a range of HP creative and specialty media Image Quality Color Accuracy Median: < 1.6 dE2000 95% Of Colors: < 2.8 dE2000 Color Stability < 1 dE2000 in less than 5 minutes Repeatability Average < 0.5 dE2000, 95% of colors < 1.4 dE2000 print-to-print repeatability Maximum Optical Density 4 L min / 2.5 D Paper Handling Paper-Feed Method Sheet feed, roll feed, automatic cutter (cuts all media except canvas) Media Types Photographic, proofing, fine art printing material, self-adhesive, banner and sign, bond and coated, film, backlit, fabric/textile Media Weight Up to 133 lb (500 g/m2) Media Thickness Up to 31.5 mil (0.8 mm) Paper Sizes Sheet: 8.5 x 11.0 to 24.0 x 66.0 (21.59 x 27.94 to 60.96 x 167.64 cm) Roll: 11.0 to 24.0 (27.94 to 60.96 cm) wide
Printing Method Printing Technology HP Thermal Inkjet Maximum Resolution Up to 2400 x 1200 optimized dpi Print Speed Print Time Line Drawing: 21 sec/page on A1/D (economode) Print Speed Line Drawing: 120 A1/D prints per hour (economode) Ink Droplet Size 6 pL (C, M, Y, G, pK); 9 pL (mK) Ink Type 5 dye-based (C, M, Y, G, pK; pigment-based (mK) Ink Cartridge Configuration 6 individual ink cartridges (cyan, gray, magenta, matte black, photo black, yellow) Ink Cartridge Capacity 130 or 300 mL Margins Top x Bottom x Left x Right: Roll: 0.12 x 0.12 x 0.12 x 0.12 (3 x 3 x 3 x 3 mm) Sheet: 0.12 x 0.87 x 0.12 x 0.12 (3 x 22 x 3 x 3 mm) Line Accuracy ±0.1% Printhead 1 (C, G, M, mK, pK, Y) Minimum Line Width 0.8 mil (0.02 mm) (HP-GL/2 addressable) Guaranteed Minimum Line Width 2.8 mil (0.07 mm) (ISO/IEC 13660:2001(E)) Maximum Optical Density Black: 2.15 D (6 L* min) Applications Line drawings, renderings, presentations, maps, orthophotos Memory 64 GB (file processing) 320 GB Media Types & Handling Paper Handling Input: Automatic front-loading roll feeds, sheet feed Output: Integrated output stacking tray (from A4/A to AO/E, with up to 50 A1/D-size capacity), media bin, automatic cutter
Printing Method Printing Technology HP Thermal Inkjet Maximum Resolution Up to 2400 x 1200 optimized dpi Print Speed Print Time Line Drawing: 21 sec/page on A1/D (economode) Print Speed Line Drawing: 120 A1/D prints per hour (economode) Ink Droplet Size 6 pL (C, M, Y, G, pK); 9 pL (mK) Ink Type 5 dye-based (C, M, Y, G, pK; pigment-based (mK) Ink Cartridge Configuration 6 individual ink cartridges (cyan, gray, magenta, matte black, photo black, yellow) Ink Cartridge Capacity 130 or 300 mL Margins Top x Bottom x Left x Right: Roll: 0.12 x 0.12 x 0.12 x 0.12â?³ (3 x 3 x 3 x 3 mm) Sheet: 0.12 x 0.87 x 0.12 x 0.12â?³ (3 x 22 x 3 x 3 mm) Line Accuracy �±0.1% Printhead 1 (C, G, M, mK, pK, Y) Minimum Line Width 0.8 mil (0.02 mm) (HP-GL/2 addressable) Guaranteed Minimum Line Width 2.8 mil (0.07 mm) (ISO/IEC 13660:2001(E))
The Xaar 502 GS15 OR can be used as a replacement to Xaar 500/80 printheads (discontinued). An ICM (Interface connection module) enables X500/80 based printers to communicate with Xaar 502 printheads. The ICM requires a waveform loaded onto it by Xaar. In many cases, the ink system of the Xaar 500/80 based printer will also need some modification as Xaar 500 printheads has 4 ink feeds whereas Xaar 502 printheads have 1 ink feed). Our engineer team can help implementing these changes to migrate existing printers from 500/80 to 502 printheads. Specifications Active nozzles : 500 Print swathe width : 70,5mm Number of rows : 1 Nozzle density : 180 Npi Nozzle Guard : C&M Ink types : Oil Drop volume : 15 75pl Number of grey level* : 6 Filter : No Heater : No TF Technology mode : None, Pulsed, High flow mode Typical firing frequency @ Max DPD*: 8khz Dimensions (WxDxH) : 104 x 17 x 100mm Jetting orientation : Downshooter, horizontal and Skycraper (see picture) Inlet / Outlet connections : Hose barb 4mm
The Xaar 501 GS8 U can be used as a replacement to Xaar 500/40 printheads (discontinued). An ICM (Interface connection module) enables X500/40 based printers to communicate with Xaar 501 printheads. The ICM requires a waveform loaded onto it by Xaar. In many cases, the ink system of the Xaar 500/40 based printer will also need some modification as Xaar 500 printheads has 4 ink feeds whereas Xaar 501 printheads have 1 ink feed). Our engineer team can help implementing these changes to migrate existing printers from 500/40 to 501 printheads. Specifications Active nozzles : 500 Print swathe width : 70,5mm Number of rows : 1 Nozzle density : 180 Npi Nozzle Guard : WFG Ink types : UV Drop volume : 8 â?? 40pl Number of grey level* : 6 Filter : Yes (Last chance filter) Heater : Yes TF Technology model : None Typical firing frequency @ Max DPD*: 8khz Dimensions (WxDxH) : 104 x 17 x 113mm Jetting orientation : Downshooter and Skycraper Inlet / Outlet connections : Hose barb 4mm
New Xaar Original 1002 GS2 Printhead The All New Xaar 1002 raises the standard in single-pass inkjet printing. Building on the market-leading Xaar 1001, this printhead delivers exceptional print quality and unrivaled reliability. Exceptionally smooth print tones and solid areas which is perfect for printing amazing life-like images, pin sharp text and bold colours 1000 Optimised Geometry nozzles deliver significantly improved drop placement accuracy and consistent drop volume even with heavily pigmented and high viscosity fluids Excellent print uniformity delivers even colour density across the printhead and the entire print width 8 grey levels, chosen dynamically, at 360 npi give an effective resolution greater than 1000 dpi, for Xaar 1002 GS6 and GS12.
Original XAAR 382/35pl Printhead To be used with: Wit-color Ultra3000 4H, WIT-COLOR ULTRA3000 6H, WIT-COLOR ULTRA3000 8H, MYJET WD3216XR60, MYJET WD3212XR60, Remarks: Original
The new Xaar 1003 GS12C Ceramics Printhead is the next generation 1,000 nozzle ceramics printhead from Xaar. Building on the market-leading Xaar 1001 and Xaar 1002 Ceramics Printheads which led the digital revolution in ceramic tile printing, the Xaar 1003 GS12C Printhead delivers a step change in print performance for ceramic tile manufacturers. The Xaar 1003 Ceramics printhead family introduces an important new feature the XaarGuard which provides the ultimate in nozzle plate protection, and coupled with other design innovations, achieves the longest maintenance-free production runs in the industry once per shift, or less. In addition, the new Xaar 1003 GS12C provides a step forward in consistent print quality across the wide print widths used for large tile, thanks to Xaarâ??s Tuned Actuator Manufacturing. The Xaar 1003 GS12C printhead is fully backward compatible with Xaar 1002C and 1001C based ceramic printers. This ensures that ceramic tile manufacturers can maximize the return on their printer investment with the ability to install the 1003C printhead in 1002C or 1001C based printers as a single head replacement or, to upgrade full print-bars or, even upgrade complete printers to take advantage of the improved durability, print quality and productivity that the Xaar 1003Ceramics printhead delivers.
The Xaar 501 GS8 UR can be used as a replacement to Xaar 500/40 printheads (discontinued). An ICM (Interface connection module) enables X500/40 based printers to communicate with Xaar 501 printheads. The ICM requires a waveform loaded onto it by Xaar. In many cases, the ink system of the Xaar 500/40 based printer will also need some modification as Xaar 500 printheads has 4 ink feeds whereas Xaar 501 printheads have 1 ink feed). Our engineer team can help implementing these changes to migrate existing printers from 500/40 to 501 printheads. Specifications Active nozzles : 500 Print swathe width : 70,5mm Number of rows : 1 Nozzle density : 180 Npi Nozzle Guard : WFG Ink types : UV / Oil Drop volume : 8 40pl Number of grey level* : 6 Filter : No Heater : No TF Technology mode : None, Pulsed, High flow mode Typical firing frequency @ Max DPD*: 8khz Dimensions (WxDxH) : 104 x 17 x 100mm Jetting orientation : Downshooter and Skycraper (see picture) Inlet / Outlet connections : Hose barb 4mm
The Xaar 502 GS15 S 180 can be used as a replacement to Xaar Proton 60pl printheads (discontinued). An ICM (Interface connection module) enables Xaar Proton 60pl based printers to communicate with Xaar 502 printheads. The ICM requires a waveform loaded onto it by Xaar. Specifications Active nozzles : 500 Print swathe width : 70,5mm Number of rows : 1 Nozzle density : 180 Npi Nozzle Guard : WFG Ink types : Solvent Drop volume : 70pl Number of grey level* : 6 Filter : Yes (Last chance filter) Heater : No TF Technology�® mode : None Typical firing frequency @ Max DPD*: 7khz Dimensions (WxDxH) : 104 x 17 x 113mm Jetting orientation : Downshooter (see picture) Inlet / Outlet connections : Hose barb 4mm
This Xaar Omnidot 760 printhead is suitable for Mutoh Zephyr 65 / Zephyr TS printers. The Xaar Omnidot 760 provides the optimum in flexibility, quality, reliability and speed. Based on Xaarâ??s unique patented multi-pulse greyscale technology Xaar 760 is user-definable and delivers a choice of binary or dynamic variable drop sizes, ranging from 8pl to 40pl. Each of the 760 nozzles are controlled independently to create a printed result with exceptionally smooth gradation and tonal range â?? ideal for high quality graphics, packaging and traditional print applications. This is the original Mutoh part (number KY-09015). Product Specifications Active nozzles: 764 Print swathe width: 53.8 mm Nozzle pitch: 70.6 �¼m Nozzle density: 360 npi Drop velocity: 6 m/s Printhead weight: 130 g Dimensions: 86 x 42.2 x 164.8 mm Drop volume: 8 pl Typical firing frequency: 40 kHz
New Panasonic Original Printhead UH-HA820 for DGI FabriJet Specifications Technology: Piezo Electric Max. Resolution: 600 dpi Nominal Drop Size: 11pl Adj. Range for Droplet Size: 3 to 14pl Max. Frequency: 30 kHz Ink Compatibility: Aqueous-based inks This Panasonic UH-HA820 is suitable for DGI FabriJet FT-1604X & FT-3204X printers. This is the original Panasonic part (number UH-HA820).
Roland Original BN-20/FH740/RE-640/SOLJET PRO4 RF-640 Printhead (DX7) -6701409010 To be used with: Roland VS-420/VS-640/VS-640i/VS-540i/VS-300i, Roland FH740, Roland BN-20, Roland XR-640, Roland SOLJET PRO4 XF-640, Roland RA-640, Roland RE-640, Roland RF-640, Remarks: Original Part no.: 6701409010
To be used with: Roland SOLJET ProII SJ-540,SJ-645EX,SJ-655EX,SJ-740,SJ-745EX,SJ-1045EX, SJ-1000,SC-540,SC-545EX, Roland VersaCAMM SP-300V, SP-540V, VP-300, VP-300I, VP-540I, Roland SOLJET PRO III XJ-640, XJ-740, XC-540, XC-540W, XC-545MT, Roland VersaArt RS-640 mimaki jv3(jv3-130, JV3-130sp, JV3-160, JV3-160sp, JV3-250, JV3-250sp etc.) Mutoh RH-II(Falcon2), RH-3, Spitfire 65, Spitfire 90, Blizzard 65, Blizzard 90
