Music CD, cassettes.
Crude palm oil (cpo), high acid palm oil (hacpo), palm oil mill effluent (pome), silica sand.
Computer hardware.
Cumputer and used computer parts.
Game console, computers, notebooks, projectors.
Nintendo wii Nintendo wii specification : Description Cpu Custom-built ibm, "broadway" Gpu Custom-built ati, "hollywood" Sram Mosys-developed 1t-sram Input/output 2 usb 2.0 ports 4 gamecube controller ports 2 512 mb flash memory slots (sd card compatible) Max resolution 480p Game format 12 cm wii disc, 8 cm gamecube disc 4.7 gb (or 8.5 gb dual layer) Controllers Supports at least 4 wireless controllers Wireless connectivity Wi-fi ieee 802.11 b/g Bluetooth 2.0 (edr) Other features "virtual console" for retro games One proprietary component/digital out located on the rear of the system
Keyboard.
Condition: New Connectors: DisplayPort HDMI APIs: CUDA DirectX 12 OpenGL 4.6 Vulkan Compatible Slot: PCI Express 4.0 x16 Brand: NVIDIA Chipset Manufacturer: NVIDIA Memory Size: 10 GB Features: RGB Lighting Multiple Monitor Support G-SYNC/FreeSync Compatible VR Ready Chipset/GPU Model: NVIDIA GeForce RTX 3080 Power Cable Requirement: 8-Pin + 8-Pin PCI-E Memory Type: GDDR6
Notebooks, desktops, computer peripherals and components including printers, scanners, memory, modems, networking products, crt, lcd and flat panel monitors, keyboards, atx cases, sound and video cards, hard drives.
Price US$649.00 The new Xaar 1003 GS-6C Ceramics Printhead is the next generation 1,000 nozzle ceramics printhead from Xaar. Building on the market-leading Xaar 1001 and Xaar 1002 Ceramics Printheads which led the digital revolution in ceramic tile printing, the Xaar 1003 GS-6C Printhead delivers a step change in print performance for ceramic tile manufacturers. The Xaar 1003 Ceramics printhead family introduces an important new feature the XaarGuard which provides the ultimate in nozzle plate protection, and coupled with other design innovations, achieves the longest maintenance-free production runs in the industry once per shift, or less. In addition, the new Xaar 1003 GS6C provides a step forward inconsistent print quality across the wide print widths used for large tile, thanks to Xaarâ??s Tuned Actuator Manufacturing. The Xaar 1003 GS6C printhead is fully backward compatible with Xaar 1002C and 1001C based ceramic printers. This ensures that ceramic tile manufacturers can maximize the return on their printer investment with the ability to install the 1003C printhead in 1002C or 1001C based printers as a single head replacement or, to upgrade full print-bars or, even upgrade complete printers to take advantage of the improved durability, print quality and productivity that the Xaar 1003 Ceramics printhead delivers.
Price US$1,149.00 Xaar 1003-GS12U Printhead Remarks: Original Active nozzles:1000 Print swathe width:70.5 mm Number of rows:2 Drop volume* (at 8 levels):12 to 84 pL Number of grey levels*:8 Typical firing frequency*:6 to 12 kHz Dimensions (WxDxH):125x30x60 mm
Price US$649.00 The Xaar 1003 C with High Laydown Technology is the benchmark against which all other single-pass printheads are compared. With its all-round superior performance, this printhead builds on the market-leading Xaar 1002 and its predecessor, the original and ground-breaking Xaar 1001. Aplication - Floor tiles - Special effects - Tile cladding for building exteriors - Wall tiles - Glass printing Active nozzles: 1000 Print swathe width: 70.5 mm Number of rows: 2 Nozzle pitch (interleaved): 70.5 �µm Drop velocity*: 6 m/s Nozzle density (nozzles per inch): 360 npi Printhead weight (dry): 144 g Ink type : Oil Drop volume* (at 8 levels) : 12 to 84 pL Number of grey levels* : 8 Typical firing frequency*: 6 to 12 kHz Dimensions (WxDxH): 125x30x60 mm
Price US$1,299.00 This printhead is suitable for VUTEk PressVu UV 200/600 printers. This is the original VUTEk part (number AA90646). Specifications - Technology: Piezo Electric - Max. Resolution: Up to 900dpi - Cal. Droplet Size: 28 pico litre - Adj. Range for Droplet Size: 25 - 30 pico litre - Tot. Amount of Nozzles: 256 - Nozzle Spacing: 254 microns (0.010 in.) - Nozzle Diameter: 36 microns - Firing Frequency: 20 kHz - Operating Temperature: up to 90�°C - Ink Compatibility: Organic solvents, UV curables, Aqueous VUTEk PressVu UV 200/600
Price US$1,075.0 This GS-508 (12 picoliters) print head is suitable for Vutek GS printers. This is the original Vutek print head. This product carries a manufacturer warranty. Manufacturer: Vutek Printer compatibility: Vutek GS2000 / GS3200 / GS5000 DP part number : PPHSE5082
Price US$1,099.00 Original Vutek GS Jetpacks Print Head 45083572 45093679 45095093 Printer compatibility: VUTEk GS2000 / GS2000 Pro / GS2000LX / GS2000LX Pro / GS3200 / GS3200 Pro / GS3250 / GS3250 Pro / GS3250LX / GS3250LX Pro / GS3250r / GS5000r / QS2 Pro / QS3 Pro DP part number : PPHVU12817 This ASM, Jetpack Print Head Grey Scale Platinum is suitable for VUTEk GS-series printers. This printhead includes the heating element and the smoothing electronic board. The jetpack also includes a set of two Jet Clamps (part number 45083572 / 45093679 / 45095093) and screws to install and aligne the printheads on the Vutek printer. This is the original VUTEk part (number replacing numbers 45083572 / 45093679 / 45095093 / 45093679). This is the latest upgraded head that comes with the connector. Technical Specifications - Drop size: 12pl - Grey Scale levels: 7 - Nozzles: 508 nozzles - Firing Frequency: 18 kHz - Active Print Width: 72 mm - Damper: integrated, quick dry break connector
Price US$999.00 PressVu 200 (PV200) Printhead - Jetpack - AA90646 - Fits EFI/VUTEk Printers VUTEk Part #: AA90646 Prime Printer Service Part #: PPS-AA90646 This Print Head/Jetpack fits the following models: PressVu 200 (PV200)
Price US$1,300.00 Toshiba CE4W1 Printhead Unique technology of jetting multiple drops onto a single dot creates wide range of grayscale with minimum 6 pl to maximum 90 pl (15 drops) per dot. Higher driving frequency (especially at small drops) CA4 realizes 28KHz at 1drop (6pL) mode, which is twice as fast as the existing CA3 using the same interface. Printer Compatibility: TOSHIBA Printer Remarks: Original
Price US$599.00 The Toshiba CE4M printhead has high nozzle density with 636 channels and a high driving frequency (especially at small drops). The Toshiba CE4M printhead offers a wide range of drop volume, from 5 to 35 picoliters, with excellent dot placement accuracy and stable jetting with water circulation thermal control. The Toshiba CE4M printhead is compatible with UV curable and oil-based pigment inks. Specifications Printhead Name: Toshiba CE4M Active nozzles: 636 Print width: 2,11 (53.6 mm) Grayscale levels: 16 Native resolution: 150dpi Max. resolution: 300 dpi Printhead weight (dry): 148 g Ink Compatibility: Oil-based pigment ink and UV curable pigment ink Drop volume: 5 35 pl Typical firing frequency: 2.8 28 kHz Dimensions (WxDxH): 85 x 70 x 23 mm
Price US$429.00 Description: This Toshiba TEC CA4W on-demand piezo electric inkjet print head is designed for industrial applications with high print quality. Unlike conventional binary print heads, this grayscale print head technology is capable of jetting multiple drops within one dot allowing for an image to have 16 levels of grey, since each dot is created through a minimum of 6 pico litre to a maximum of 90 pico litre of ink. The Toshiba TEC CA4W is suitable for UV curable and Oil based inks, has 2 ink inlet ports (which can be easily removed to be replaced with a 1 ink inlet assembly) and a chassis which provides a built-in water channel and complete sealing designed for easy temperature control. This is Toshiba original printhead. It carries a one year warranty. The jig tools used to calibrate and fit this head are available as related products. To be used with: Mimaki UJF-605CII, Oce Arizona 300 GT / Arizona 350 GT / Arizona 350 XT / Arizona 360 GT / Arizona 360 XT / Arizona 318 GL, Fujifilm Acuity Advance LT / Acuity Advance HD2545 / Acuity Advance HD2545W / Acuity Advance HD2545 X2 / Acuity Advance HD2565 / Acuity Advance HD2565 X2, EFI Rastek H650 / Rastek H700 Specifications : Technology: On Demand Piezo Electric Max. Resolution: 1200 dpi Droplet Size: 6 to 90 pico litre Maximum Grayscale Levels: 16 Tot. Amount of Nozzles: 318 Nozzle Spacing: 169 microns Firing Frequency: 28 kHz (1 drop) - 2.8 kHz (15 drops) Driving Voltage: 14 - 31 V Ink Compatibility: Oil Based pigment ink and uv ink
Price US$559.00 Description: This Toshiba TEC CA3W on-demand piezo electric inkjet print head is designed for industrial applications with high print quality. Unlike conventional binary print heads, this grayscale print head technology is capable of jetting multiple drops within one dot allowing for an image to have 8 levels of grey, since each dot is created through a minimum of 6 pico litre to a maximum of 42 pico litre of ink. The Toshiba TEC CA3W is suitable for UV curable and Oil based inks, has 2 ink inlet ports (which can be easily removed to be replaced with a 1 ink inlet assembly) and a chassis which provides a built-in water channel and complete sealing designed for easy temperature control. To be used with: Mimaki UJF-605RII / UJF-605C, Oc�© Arizona 200 GT / Arizona 250 GT, Fujifilm Acuity Advance HD2504 Specifications Technology: On Demand Piezo Electric Max. Resolution: 1200 dpi Droplet Size: 6 to 42 pico litre Maximum Grayscale Levels: 8 Tot. Amount of Nozzles: 318 Nozzle Spacing: 169 microns Firing Frequency: 13.8 kHz (1 drop) - 2.8 kHz (15 drops) Driving Voltage: 14 - 28 V Ink Compatibility: Oil Based pigment ink and uv ink
