Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Coated fabrics are flexible composite materials formed by applying bonding agents to either one or both sides of the fabric substrate and precisely coating it with different rubber compounds depending on the end application of the fabric. After the coating is cured it creates a strong bond between the rubber and the fabric. The final product after coating and curing is solid and flexible. It has a good stability and is washable, durable and much stronger than uncoated fabrics. Rubber coated fabrics are very close textured and therefore exhibit low permeation and diffusion. They can be electrically conductive and can also be weather, oil and temperature resistant. Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as Cotton, Nylon, Polyester, glass, knits, silk, Kevlar. Fabrics of various blends are coated with Nitrile, Chloroprene, Silicon, NR/SBR, Butyl, Hypalon (CSM), EPDM & blended polymers for variety of applications in the fields of Insulation, Defense, aviation, marine and offshore operations. ZRF fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters. Zenith’s expertise in compounding is due to its extensive research and development program. All coated fabrics are vigorously tested for specification given by the customer. With our extensive testing procedures and fully equipped lab we ensure that all fabrics meet the highest quality standards. Zenith is using solvent-based coating, which gives better results as far as adhesion is concerned. Zenith’s large scale production capabilities and short development periods assures consistent quality and faster deliveries.
Polyester yarn, poly cotton yarn, synthetic yarn, knitted fabrics, denim fabric, denim jeans, synthetic leather..
Synthetic Fabric.
Polypropylene (pp) woven fabrics rolls, pp woven bags & sacks, fibc bags..We will provide our clients all types of service
Sofa Fabrics .
Cotton & synthetic grey fabrics.Manufacturing
Plastic products hdpe fabric rolls & tarpaulin / pvc fabric & tarpaulin / pp fabric rolls & bags (woven sacks) / standup pouch / ldpe & pp linners / jumbo bags / ropes mono & multifilament food products: milk powder, sugar, corn, pulses, cereals, cattle feeds, oils (flower oils & cereal oils), dryfruits. office mumbai india & united arab emirates.
We are manufacturer of pp ( polypropolene ) woven fabric & sacks ( bags ) . which use in making for sugar bag, antislip bag, bopp bag, sand bag, chemical bag, rice bag, wheat bag, pluses bag, tile adhesive bag, fertilizer bag, shopping bag, box bag, multicolour calendar bags, cement (block bottom) bags, fibc bags, ultra sonic hemming bag and all type of bags for 5 kg to 2000 kgs bags. (laminated fabric, unlamented fabric, centre cut fabric, side cut fabric, both side cut fabric)..Manufacturer and exporter
Unstitched fabrics like nylon, polyester, cotton shirting and suiting.
Food Flavour Natural And Synthetic Fabric..
Price And Quantity Price 101 INR/Bag Minimum Order Quantity 100000 Bag Product Specifications Use Industrial Attributes UV-Proof Washable Color White, multicolor Style Plain Texture Plain Pattern Plain Material PP Trade Information Supply Ability 5000000 Bag Per Month Delivery Time 15-20 Days Main Domestic Market All India Product Description We are providing PP Fabric Roll, which is a platform that is at the front of a loom and is where woven material is wound after it exits the breast beam. It is white in colour and also has many other colour availability. This is made up of the finest quality material, which makes it durable and strong. We pack PP Fabric Roll in a sturdy packing material which prevents it from damage while transportation.
Product Description - PP Strapping Rolls Available In Various Sizes And Weight In Different Colours As Per Requirements With Excellent Strength And Breakload. Product Origin - Gujarat, India Key Specifications/Special Features - PP Straps Are Available In Various Colors And Natural Too With Online Printing Facilities, Giving Excellent Printing Results On The Strap. Minimum Order Size and Packaging details - Minium Order Quantity 20 Ft Container And Rafia Bag Packing Or Pallet Packing As Required.
Surya Textech SS Nonwoven are made on Double beam Line, it offers Soft & Super-soft qualities for Hygiene, Medical, Surgical, Laminates & Agri Segments. Our strength lies in versatility & customization through value-added treatments to meet the demand of various challenging applications from this single fabric. Some of the Value-added / treated qualities with their application are listed below. Hydrophilic â?? Hygiene Segment UV Stabilised â?? Agri & Outdoor Usage Segments Antistatic â?? Medical & Protective Wear Segments Antimicrobial- Medical Segment Fire Retardants- Fire Safety Segment Surya SS spun-bond Non-woven is made from the highest grade PP & World Class Additives for achieving softness & best physical parameters. We offer our SS NW in the GSM range of 8-200, and width from 100 mm -1600 mm in desired slit sizes. More than 95% of rolls are supplied joint-free / uniform length.
PP Woven Roll And Fabric
Woven Fabrics are used for manufacturing packing bags that are required while packaging hugs numbers of commodities. Manufacturing using two More sets of yarn interlaced at right angles to each other, the fabrics are available in different colors and length .these fabrics are comfortable, soft and crinkle free and can easily be loaded on any cutting and stitching machines
We are leading Manufacturer, Supplier and Exporter of PP Woven Circular Fabric which is a durable, reliable and cost-efficient packaging option for a different purpose. Ekta Polypack LLP is an established circular fabric exporter in India. Available in laminated or un-laminated form, our tubular PP woven fabrics and rolls are produced in the technologically advanced machines, looms and tape lines. Our PP woven circular fabric is used for making the bale wrap, box bags, PP courier bags, PP perforated bags etc. These woven fabrics are also used in the automotive industry for casing the tempos, trucks, and other loading vehicles. Each of our tubular PP woven fabrics products is UV treated which ensure weather proof finishing and durability. Technical Specification GSM : 40 GSM to 120 GSM PP Fabric : Coated or Uncoated fabric Size : 30 cm to 140 cm (Tubular Fabric) Construction As per the customers requirement Gusseting : Gusseting on each side possible as per the requirement Size, Color & Type : As per the customers requirement & purely customized Lamination : As per customer Requirement Mesh : 9 x 9 to 14 x 14 or as the customers per requirement UV Stabilization : As per customer Requirement Packing : As per customer Requirement
We are Leading Manufacture, Supplier and Exporter of Flat Woven PP Fabric which is durable, reliable and cost efficient packaging options for different purpose. Ekta Polypack LLP is an India based Flat PP woven fabric manufacturer, supplier and exporter. Flat PP woven fabrics are made using multiple layers to enhance its durability and toughness. The lightweight PP woven fabrics are used in the textile industry for packaging and making tarpaulins while the heavyweight woven fabrics are used for heavy packaging in the industry. At Ekta Polypack, we make sure that stringent quality controls are being followed while manufacturing the PP woven fabric to produce top-quality flat PP woven fabrics- also known as polypropylene flat woven fabrics. This polypropylene flat woven fabric is an ideal material for packaging as it provides complete protection to goods from adverse environmental conditions like rain and heat. The excellent tear strength of flat PP woven fabrics makes it a suitable option for the manufacturing of FIBC, PP Jumbo Bags/Bulk bags, Tarpaulin, PP ground covers and a PP sheets to cover agriculture land Technical Specification GSM : 40 GSM to 120 GSM PP Fabric : Coated or Uncoated fabric Size : 60 cm to 180 cm (flat) Reinforcement : Yes if required, and as per the customers requirement Construction As per the customers requirement Size, Color & Type : As per the customers requirement & purely customized Packing : Rolls up to 5000 meters or as per customer requirements Lamination : As per customer Requirement Mesh : 9 x 9 to 14 x 14 or as the customers per requirement UV stabilization : As per customer Requirement
