Automobile Rockers panel is the lowest body panel on the side of the car located between the two wheelwells. In most cars, only the edge of the rocker panel is visible when the doors are closed since it supports the bottom of the door. TÃ??Ã?Âhe goal of a carburetor is to mix just the right amount of petrol with air so that the engine runs properly. If there is not enough fuel mixed with the air, the engine Ã?¢??runs leanÃ?¢?? and either will not run or potentially damages the engine. If there is too much fuel mixed with the air, the engine Ã?¢??runs richÃ?¢?? and either will not run (it floods), runs very smoky, runs poorly (bogs down, stalls easily), or at the very least wastes fuel. The carb is in charge of getting the mixture just right. The crankshaft, sometimes casually called the crank, is the part of an engine which changes the up and down motion of the pistons into rotation. To convert the motion, the crankshaft has one or more offset shafts. The pistons are connected to the crankshaft by these shafts. When the piston moves up and down, it pushes the offset shaft. This in turn rotates the crankshaft.
Organic fertilizers, organic pest control products , pesticides, fertilizers , castor oil cakes, castor seeds , and fly ash.
These accuracy milled components are used for prototyping in the automobile manufacturing for R&D and form of any chemical ingredient. Our machine components are very commended for its high stability and strong foundation.
Auto parts
We manufacture high quality Bearing Bushes used in different models of automobiles and machineries. We can also provide any type of Bearing Bushes as per customer's requirement/ specifications
• Connection rods are widely used in vehicles that are powered by internal combustion engines. All cars and trucks that use this type of engine employ the use of connecting rods. Farm equipment like tractors and combines also use connecting rods. Even construction equipment like bulldozers uses internal combustion engines, thus requiring connecting rods.
• When the spark plugs ignite the fuel-air mixture in the combustion chamber, the resulting explosion forces the pistons downward with tremendous force. The function of the crankshaft is to change the up-and-down motion of the pistons to a rotating motion. This is accomplished by having the connecting rods (which are attached to the pistons) connect to the crankshaft in an offset manner, so that as they go up and down their angle changes. This can be easily seen in the video link supplied
A short cylindrical bearing surface fitted between two arms of a crank and set parallel to the main shaft of the crankshaft.
Types of rocker arm 1 stamped steel rocker arm 2 rollers tipped rocker arm 3 full roller rocker arm 4 shafts rocker arm Rocker arms are typically in between the pushrod and the intake and exhaust valves. They allow the pushrods to push up on the rocker arms and therefore push down on the valves. However, in over head cam applications the cam will ride directly on the rocker arm. In addition to just changing the the direction of the motion from up on the rocker arm to down on the valve, the rocker arm changes the amount of motion transferred. Typically a rocker arm will "multiply" its motion by a rocker arm ratio by a factor of 1.45 to 1.7, meaning that for each .100" of pushrod motion
A camshaft's main job is to open and close the engine valves, via the lifters and rocker arms, in time to the piston's position in the cylinder. This causes the engine to take in air, burn fuel and expel exhaust gasses.
Connecting rod MARUTI Maruti - 800 / 1000 LOMBARDINI Lombardini - 450 / 510 Lombardini - 520 TATA Tata - 1210 - E / D Tata - 1210 New Type, 89 Model Tata - 1612 Teeth Type Tata - 1612 New Model Tata - 407 / 608 Tata - 206 / 208 Tata - 1312 / 1516 Tata - Indica PEUGEOT Peugeot 540 Peugeot XDPT - 3 Peugeot 504 LEYLAND Leyland - 370 / 400 Leyland - 402 / 411 Leyland - Hino Leyland - Turbo MATADOR Matador F - 305 Matador F - 307 BMC BMC Trekker - L / R Standard lot size
We are manufacturing camshafts for automobile engine suitable for 2-wheeler, 3-wheeler, 4-wheeler, and 6-wheeler which includes single cylinder to multi cylinder, for petrol/gasoline, diesel & gas engines. Forged steel camshaft Hardened & completely CNC machine and CNC grinded OEM quality products. Minimum 1 pcs.
Brand : KIC Ratio : 5:1 to 7:1 Gear Type : Helical Output Speed(Rpm) : 70 Output Torque(Nm) : 800~100000N.M. Rated Power(Kw) : 0.06-15kw Input Speed(Rpm) : 350 Size D,E,F,G,H Material Cast Iron
Automobile head light.
Wheel bolt m18x 1.25 length 89 mm 20 pcs per box 0.200 grm per pcs
This is used in sheckle of truck manufacture as per drawing or sample Minimum 100 pcs weight is 1.5 kg od 32 mm length 205 mm
Gears As Per Drawings Export worthy packing
This Crank Shaft Assembly Is For Two Stroke Engine. It Is Suitable For BAJAJ - RE. We Manufacture Crank Shaft Assembly For All Types Of Vehicle. We Are Making And We Can Make Any Damn Parts From Drawing Or Sample.
We manufacture all types of crank shaft. We provide oem quality to our customer. We also accept the drawing of the customer and according to that drawing, we developed their product.
