Conveyor Belts.
Mulch film, LDPE shrink film, LLDPE stretch wrap film & lamination grade film.
Welded wire mesh, welded wire fabrics.
Gas flaring systems, gas flares, ground flare, burners, flame arresters, spark arresters, moisture traps.
REFLEX GLASS LIQUID LEVEL INDICATOR Enquiry Now Liquid level indicators are equipped with boron silicate glass, hardened by an accurately controlled heat treatment process. These level indicators are used to display the level of ammonia gas in the system. The liquid level indicators are installed with stop valves equipped with handwheels The liquid chamber is a one piece metal body covered by glass. The light striking the glass in the liquid portion is absorbed by the liquid whereas the light striking the glass in the vapour portion is reflected, making the liquid appear black. Sizes: 12", 18", 24", 30" 36", 42" 48", 54", 60". Gives safe and positive visual indication of liquid level in vessel under high pressure and temperature conditions. Suitable for R717 (Ammonia), HCFC & HFC. In case of glass break, the balls inside the valve stop the refrigeration flow immediately. Tempered boron silicate glass resistant to chemical, thermal and mechanical shocks. Safe working pressure: 400 psig (27 bar). Large chambers for boiling, flashing and surging liquids.
Type SA5 solenoid valves in refrigeration sysytem is the direct acting type & type SA 17, SA 32, SA 42, SA 50 are higher capacity pilot operated Ammonia solenoid valves in refrigeration system & air conditioning applications. SPECIFICATIONS : Refrigerants : R717 (NH3), R22, R134A etc. Temperature of medium -40 C to + 80C Single coil (type KC -3) for all SA series valves. AVAILABLE IN SIZES: 15 mm / 20 mm / 25 mm / 32 mm / 40 mm and 50 mm
MSVA Ammonia Stop Valves are accessible with Standard neck (MSVA-S) in angle way and straightway variants. Ammonia stop valves are specially designed to meet all modern refrigeration application necessities and favorable flow characteristics. These Ammonia Stop valves are very easy to disassemble and repair when required. The Ammonia stop valve cone is intended to ensure perfect sealing and withstand a high pulsation and vibration, which can be present particularly in the discharge line. The MSVA is furnished with internal back seating support/enabling the shaft seal (packing gland) to be replaced while the Ammonia stop valve is still under working condition. Highlights Applicable to R717(Ammonia), R744(CO2), HCFC and HFC. Also utilized in chemical and petrochemical applications. Each valve type is clearly mentioned with type, size and operating range. Quick and simple valve maintenance. It requires less effort to replace the top assembly and no welding is required. Modular Concept Each valve body is available with a number of different sizes and connection types. Possible to transform/convert MSVA-S into any other product of MSVL family (stop/check valves, regulating valve and strainer) by replacing the entire top part. Optional accessories: For frequent operation heavy duty hand wheel can be supplied. For infrequent operation seal Cap can be supplied Available in angleway and straightway forms with Standard neck. The valves and seal caps are prepared for sealing, to avoid operation by unauthorised person, utilizing a seal wire. Internal back seating: Internal metal backseating: -DN 15 - 65 (�½ - 2�½ in.). Internal TEFLON backseating: DN 80 - 200 (3-8 in.). Can be used for flow in both directions. Valve body and bonnet material is low temperature steel as per PED norms. Maximum working pressure: - 754 psi g (52 bar g). Operating temperature range: - 60 to +150C ( 76 to 302F).
Technical Data Introduction Refrigerants Shut off valves are applicable to all common non-flammable refrigerants including R717 and non-corrosive gases/liquids dependent on sealing material compatibility. For further information please see installation instruction for CSVA. These Shut off Valves are used in the Industrial Refrigeration system. Temperature range Standard version : - 46/+150�°C Pressure range shut off valves are designed for max, working pressure CSVA-2 DN-15 to DN-40 : 25 bar (362 psig) CSVA-4 DN 15 to DN 200:40 bar (580 psig) Features Housing Made of special, cold resistant steel. Valve cone Shut off valves cone can be turned on the spindle, thus there will be no friction between the cone and the seat, when the valve is opened and closed. Spindle Made of polished stainless steel so that PTFE and Graphite gaskets are not damaged. Sealing Spindle sealing is done with PTFE and Graphite gaskets assuring 100% sealing. Design Housing Made of special, cold resistant steel. Connections Available with the following connections: - Butt-weld ANSI DN15-40(B 36.10 Schedule 80) Butt-weld ANSI DN 50(B 36.10 Schedule 40) Butt-weld ANSI Socket weld (ANSI B 16.11) - DN 15 - 40 % -1% in.). Valve Cone Spindle Made of polished stainless steel so that PTFE and Graphite gaskets are not damaged. Sealing Spindle sealing is done with PTFE and Graphite gaskets assuring 100% sealing.
VALVES Ball Valves: (IDF, SMS, TC, DIN, Flange, BSP) Butterfly Valve: (Manual & Pneumatic) Diaphragm & Zero Dead Leg Valves FDV & Flush Bottom Valves Non Return & Plug Valves Sampling & Needle Valve
Minimum Order Quantity : 1 Roll Color : Silver and black Length : 400 Thickness (microns) : 25microns Width : 1 mtr and 1.2 mtr AVAILABLE
Product Details: Minimum Order Quantity 1 Roll Application Open Cultivation Length 400 mtrs Brand Agriplast Thickness 25 Mic Width 1 mtr Colour Black and Silver
PLE Series Servo Gearbox 5 kinds of optional size = 60, 80, 90, 120 & 160 mm Rated Output Torque = 8.5 Nm to 680Nm Reduction Ratio 1 stage = 3, 4, 5, 7, 10 Reduction Ratio 2 stage = 12, 16, 20, 25, 28, 35, 40, 50, 70 Reduction Ratio 3 stage = 64, 80, 100, 125, 140, 175, 200, 250, 350, 400, 500, 700, 1000 Backlash = 12 arc-min to 18 arc-minute
Copper Burner Pigtails Available in length size 12”-18”-24”-36”-48”-60”. For 3/8 BSPM connections. Copper tube with brass bullnoze and nut. Copper Cylinder Copper Cylinder Pigtails Copper tube with brass bullnoze and nut. Industrial Gas Hoses Heat resistant flange end hoses LOT Hose Liquid off-take hoses S.S. Teflon Industrial Gas Hose Flexible Burner Pigtails Low pressure hoses for imported automatic burners. Standard Lot Size
Our organization is counted amongst the most distinguished manufacturers and suppliers of finest quality 3 piece design ball valve. These products are manufactured using high grade raw material that is sourced from the registered vendors of the market. Our range is available with a heavy directional lever handle with a great compact design. The floating ball in the valve helps in easy movement of ball with minimum torque. Moreover, the blow out proof stem design ensures maximum safety during high pressure. Three piece design facilitates easy maintenance of ball valve without disturbing the existing pipe line. Apart from this, we offer these to the clients at market leading prices. Ball valves are available in screwed / socket weld & flange ends. Single piece
We manufacture and supply our valuable clients a broad assortment of manual valves & actuated valves. Our range comprises manual ball valve, manual butterfly valve and actuated ball valves & actuated butterfly valves. These valves are manufactured employing high tech machinery and advanced technology under the strict surveillance of our experienced professionals. The valves we offer can be availed in various specifications at competitive prices. Our organization is counted amongst the most distinguished manufacturers and suppliers of finest quality 3 piece design ball valve. These products are manufactured using high grade raw material that is sourced from the registered vendors of the market. Our range is available with a heavy directional lever handle with a great compact design. The floating ball in the valve helps in easy movement of ball with minimum torque. Moreover, the blow out proof stem design ensures maximum safety during high pressure. Three piece design facilitates easy maintenance of ball valve without disturbing the existing pipe line. Apart from this, we offer these to the clients at market leading prices. Ball valves are available in screwed / socket weld & flange ends. Features: •Robust body with strong handle •Low operating torque •Material– ss 316, ss304, cs, with ss working parts •Reliable economical attractive long lasting ball valves.
PB2. Minimum 100 kgs
Industrial valve
Pneumatic cylinders, hydraulic cylinder, pneumatic valves, solenoid valves, manual valves, air preparation unit f.R.L, pneumatic one touch fittings, tubings, compressed air piping and fittings.
Ash & fuel handling system spare parts, refractory & insulation materials, valves, screws of boilers.
Gear Couplings, Pin bush Couplings, Tyre Couplings
