WOODPECKERPLY Film Faced Concrete Shuttering Plywood is one of our premium products widely used for form (concrete shuttering) works across the globe. It is made using 100% eco-friendly plantation wood (rubber wood) veneers, which are as good as hardwood veneers with a density of 700 Kgs per CBM. These veneers are machine dried and bonded with high quality phenol formaldehyde (100% Boiling Water Proof) resin or MUF resin (Moisture Resistant) under controlled temperature and pressure. It is further covered with resin – treated paper that turns into a protective film during production. Edges are sealed with water based acrylic paint. Surface Film: 125GSM Phenolic Film of Dynea Brand, Finland. Face Veneer: Gurjan (Keruing)/ Pine imported wood Core Veneer: Rubber Wood with density of 700 Kgs /CBM Sizes: 1220/1250 MM (width) x 2440/2500 MM(length) x 12/15/18/21 MM(thickness) Grades we have MR (Moisture Resistant) Grade which facilitates 4 to 5 repetitions, depending on handling and storage. BWP (Boiling Water Proof) Grade which facilitates 10 to 12 repetitions, depending on handling and storage. Application:- Universally used for centering works for columns, beams, slabs etc. Other uses are Outdoor furniture, structures, vehicle body building, container flooring, etc.
Marine Plywood (100% BWP) is made of selected hardwood and plantation wood veneers. It is bonded with phenol formaldehyde resin to withstand extreme weather conditions and alternate wetting and drying. Further, the GLP formula helps to give overall protection against termites, borers and insects. Core Veneer : High Density Plantation Wood (Eucalyptus/Silver Oak) Density: 700Kgs /Cubic Metre Face Veneer : Gurjan (Kruing) imported hard wood Glue : Phenol Formaldehyde (Prefere 4976 from Dynea AS Norway) Grade : BWP , 72 Hours Boiling Water Proof Thickness in mm : 6, 9, 12, 15, 18, 21 & 24 Size in mm : 1220 x 2440 Application : Boat building, kitchen cabinets, wardrobes, exterior furniture, etc.
Packing Plywood
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof... Core Veneer : High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre Face Veneer :Gurjan (Kruing) / Pine imported wood Glue :Melamine Urea Formaldehyde Grade : MR (Moisture resistant) Grade Thickness in mm : 6, 9, 12, 15, 18, 21, 24 Size in mm : 1220 x 2440 Application :It is used for interior applications like false ceiling, partition, furniture, portable cabins, office and hotel interiors, etc.
End fitment plywood is widely used by the BOPP or other specialty film manufacturers for packing their film rolls. Since film rolls are very expensive it needs immense care and very good quality packing material and used. We understand and value the customer need and always ensure quality of the end fitment plywood Core Veneer :High Density Plantation Wood (Rubber Wood) : Density: 700Kgs /Cubic Metre Face Veneer :Gurjan (Kruing)/ Pine Glue : Melamine Urea Formaldehyde (Moisture resistant) Grade : MR (Moisture Resistant) Grade Thickness in mm :12 to 24MM Size in mm : 485 x 485, 500 x 500, 610 x 610, 630 x 630, 650 x 650, 715 x 715, 700 x 750, :700 x 700, 750 x 750, 800 x 850, 1000 x 1000 etc. Application : Packing film rolls
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof... Core Veneer :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre Face Veneer :Gurjan (Kruing) / Pine imported wood Glue :Melamine Urea Formaldehyde Grade : MR (Moisture resistant) Grade Thickness in mm : 6, 9, 12, 15, 18, 21, 24 Size in mm : 1220 x 2440 Application :It is used for interior applications like false ceiling, partition, furniture, portable cabins, office and hotel interiors, etc.
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof... Core Veneer :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre Face Veneer :Gurjan (Kruing) / Pine imported wood Glue :Melamine Urea Formaldehyde Grade : MR (Moisture resistant) Grade Thickness in mm : 6, 9, 12, 15, 18, 21, 24 Size in mm : 1220 x 2440 Application :It is used for interior applications like false ceiling, partition, furniture, portable cabins, office and hotel interiors, etc.
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof... Core Veneer :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre Face Veneer :Gurjan (Kruing) / Pine imported wood Glue :Melamine Urea Formaldehyde Grade : MR (Moisture resistant) Grade Thickness in mm : 6, 9, 12, 15, 18, 21, 24 Size in mm : 1220 x 2440 Application :It is used for interior applications like false ceiling, partition, furniture, portable cabins, office and hotel interiors, etc.
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof... Core Veneer :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre Face Veneer :Gurjan (Kruing) / Pine imported wood Glue :Melamine Urea Formaldehyde Grade : MR (Moisture resistant) Grade Thickness in mm : 6, 9, 12, 15, 18, 21, 24 Size in mm : 1220 x 2440 Application :It is used for interior applications like false ceiling, partition, furniture, portable cabins, office and hotel interiors, etc.
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof... Core Veneer :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre Face Veneer :Gurjan (Kruing) / Pine imported wood Glue :Melamine Urea Formaldehyde Grade : MR (Moisture resistant) Grade Thickness in mm : 6, 9, 12, 15, 18, 21, 24 Size in mm : 1220 x 2440 Application :It is used for interior applications like false ceiling, partition, furniture, portable cabins, office and hotel interiors, etc.
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof... Core Veneer :High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre Face Veneer :Gurjan (Kruing) / Pine imported wood Glue :Melamine Urea Formaldehyde Grade : MR (Moisture resistant) Grade Thickness in mm : 6, 9, 12, 15, 18, 21, 24 Size in mm : 1220 x 2440 Application :It is used for interior applications like false ceiling, partition, furniture, portable cabins, office and hotel interiors, etc.
Mat Plywood Hard Wood
Made from plantation wood veneers with high density. These veneers are machine dried and bonded with Melamine Urea Formaldehyde resin, which is Moisture Resistant. We apply Unique GLP formula in the resin to make each plywood board borer and termite proof... Core Veneer : High Density Plantation Wood (Rubber Wood) Density: 700Kgs /Cubic Metre Face Veneer :Gurjan (Kruing) / Pine imported wood Glue :Melamine Urea Formaldehyde Grade : MR (Moisture resistant) Grade Thickness in mm : 6, 9, 12, 15, 18, 21, 24 Size in mm : 1220 x 2440 Application :It is used for interior applications like false ceiling, partition, furniture, portable cabins, office and hotel interiors, etc.
End fitment plywood is widely used by the BOPP or other specialty film manufacturers for packing their film rolls. Since film rolls are very expensive it needs immense care and very good quality packing material and used. We understand and value the customer need and always ensure quality of the end fitment plywood Core Veneer :High Density Plantation Wood (Rubber Wood) : Density: 700Kgs /Cubic Metre Face Veneer :Gurjan (Kruing)/ Pine Glue : Melamine Urea Formaldehyde (Moisture resistant) Grade : MR (Moisture Resistant) Grade Thickness in mm :12 to 24MM Size in mm : 485 x 485, 500 x 500, 610 x 610, 630 x 630, 650 x 650, 715 x 715, 700 x 750, :700 x 700, 750 x 750, 800 x 850, 1000 x 1000 etc. Application : Packing film rolls
WOODPECKERPLY Film Faced Concrete Shuttering Plywood is one of our premium products widely used for form (concrete shuttering) works across the globe. It is made using 100% eco-friendly plantation wood (rubber wood) veneers, which are as good as hardwood veneers with a density of 700 Kgs per CBM. These veneers are machine dried and bonded with high quality phenol formaldehyde (100% Boiling Water Proof) resin or MUF resin (Moisture Resistant) under controlled temperature and pressure. It is further covered with resin â?? treated paper that turns into a protective film during production. Edges are sealed with water based acrylic paint. Surface Film: 125GSM Phenolic Film of Dynea Brand, Finland. Face Veneer: Gurjan (Keruing)/ Pine imported wood Core Veneer: Rubber Wood with density of 700 Kgs /CBM Sizes: 1220/1250 MM (width) x 2440/2500 MM(length) x 12/15/18/21 MM(thickness)
DECORATIVE LAMINATES THICKNESS AS PER YOUR REQUIREMENT SIZE 2.44 X 1.22 mm plywood also available
Steel Marine Plywood : 100% Gurjan wood, Marine Grade, IS-710, specialty 19mmPly=15Ply made with Tropical Imported Gurjan wood from Burma & Malaysia with Phenol Formaldehyde Resin IS: 848-1974. Pressed Under High Pressure. Density of PLY- 825 kg m3 (approx.), Adhesive BWP- IS 848, Moisture Content- 8 to 12%, Glue sheer stent- kg per square inch, Minimum 135, Moisture Resistent- minimum 100, Water absorbent- minimum 3% in 24 hours Gold Marine Plywood : IS-710, 19mm=13Ply made with Tropical Imported Gurjan wood from Burma & Malaysia with Phenol Formaldehyde Resin IS: 848-1974. Pressed Under high pressure.
Silver MR : Moisture Resistant Grade (MR) IS-303, 18mm=13Ply made with Imported Timber from Europe with Moisture Resistant Glue under High Presure.
Steel Block Boards : Manufactured with imported Timber New Zealand Pine with Gurjan Core 2.5mm marine grade with Phenol Formaldehyde Resin IS: 848-1974 i.e. CPL Gold Block Boards. We also manufacture CPL Steel Block Board with imported New Zealand Pine & 4mm Gurjan Core only marine grade and you will be glad to know that you will get 20+ mm thickness. IS: 1659
Steel Flush Doors : Manufactured with imported New Zealand Pinewood & Gurjan Core Marine Grade Only, Gurjan/Kuring 4mm thick Core with phenol formaldehyde and to meet BIS 2202 (Part1) 1983.
