Magnus chequered plywood is one of the best transportation purpose plywood. The ply has a chequered pattern on its surface. Because of high pressure, the panel develops high density that can sustain high traffic on flooring in public & industrial use Application: This is an antis kid plywood which is useful in flooring specially in heavy vehicles and large containers. It is useful in automobile sector for ceiling, paneling, seat back rest etc.
Thicknesses : 12, 15, 19 & 25 mm
Weight : 33 & 36 Kg in 12 mm, 38 & 44 Kg in 15 mm
Sizes : 5.5 x 2.5 feet to 10.5 x 5.5 feet
Our Specially created Fire Retardant Plywood delays temperature rise, reduce the evaporation of gases, prevent the oxygen content and flame spread. Fire Retardant Plywood can be used in places where there are chances of catching fire like kitchens, restaurants.
Applications: container, buses, trucks, railway, hotels multistoried buildings,
offices, shopping mall, cinema hall, pantry cars, kitchen etc.
Fire Retardant Treatment : type 1 & type 2
Size : 5.5x2.5 to 10.5x5.5 feet
Thickness : 4,6,9,12,18,25 mm
3
Density : 0.65 to 1.20 gm/cm
TECHNICAL SPECIFICATIONS (IS:5509:2000)
Dimensions BIS Requirements Observation Values
1. Length 2440 + 6 2442mm
0
2. Width 1220 + 3 1222mm
0
3. Thickness 12mm �± 5% 11.80mm
4. Squareness 2mm/1000mm 0.95mm
5. Edge straightness 2mm/1000mm 0.50mm
6. Workmanship & finish As per clause 9.1 to 9.2 Satisfactory
Physical properties
3
7. Density 0.60 - 0.65gm/cm 0.64gm/cm
8. Moisture contents 5 - 20% 10.25%
9. Water resistance test Pass standard Excellent
Cyclic test :8 hours - 16 hours
Boiling : drying
3 Cycles :
10. Mycological Test Pass standard Excellent
11. Static bending strength
2
Along the grain M.O.E. Avg. 5000N/mm 5850 N/mm 2 2
Ind. 4500N/mm 4020 N/mm 2 2
Across the grain M.O.E. Avg. 2500N/mm 3480 N/mm 2 2
Ind. 2200N/mm 2855 N/mm
2
Along the grain M.O.R. Avg. 40 47.80N/mm2
Ind. 36 36.40N/mm2
Across the grain M.O.R. Avg. 20 27.25N/mm2
Ind. 18 20.35N/mm
FIRE RETARDANT TESTS IS : 5509 : 2000
12. Flammability 30 Min. 35 Min.
13. Flame penetration 30 Min. 33 Min.
14 Rate of burning 20 Min. 28 Min.
(Wt. loss 30 to 70%)
Magnus marine plywood is specially treated plywood that is designed to
resist rotting in a high moisture environment. It is manufactured with utm ost care in the supervision of technical experts with well selected pieces of core and face veneers.
Further, the finished plywood is subjected to proper chemical treatment with waterÂsoluble fixed type preservatives undervacuum pressure to ensure
protection against wood destroying organism and to make the product insects, borer, termites and fungi free.
Applications: Extensively used in making of furniture, partitions,
racks/shelves, shut ters, under layer for decorative laminates etc.
Size (In feet) : 6x3, 7x3, 8x3, 6x4, 7x4, 8x4, 7x5, 8x5
Thickness: 4, 6, 8, 12, 15, 18, 25 mm
Magnus calibrated plywood is manufactured for those who are passionate about the perfection in their work. It is manufactured by two way pressing system. Assembled core veneers are pressed in hydraulic hot press and then sanded in imported calibrated machine where uneven thickness of core veneer, from 0.5 mm to 0.1 mm becomes flat after sanding. After getting a uniform size panel, it is laminated with Gurjan face veneer and again sanded with wide belt sander to get the perfect finish. Magnus calibrated plywood is ideal for the lamination of mica.
In high profile offices or home it provides the perfect finish after paneling. Magnus calibrated plywood can also be used for shuttering work as its equal thickness makes shutter work easy.
Magnus ply is available in boiling water resistant (BWR) grades. This grade is used for the interior and exterior woodworking application. BWR grade plywood is manufactured with phenol formaldehyde resin.
Application: Magnus next gen plywood is widely used for the woodworking, furniture making, homes, offices, business centers, hotels etc.
Sizes (in feet) : 6x3, 6x4, 7x3, 7x4, 8x3, 8x4
Thicknesses: 6, 12, 18 mm
Magnus film
faced shut
tering plywood is manufactured with high density timber in ultra modern hot presses. Since it is manufactured with CPGL technology, thus it has
extra strength than ordinary film face ply.
For structurally strong and better bonding it is treated differently while manufacturing.
Magnus film face shuttering ply is widely known for the maximum
repetitions it gives. Users find it a very useful & economical product
worth their investment.
TECHNICAL SPECIFICATIONS (IS:4990:1993)
Dimension BIS Requirement Observation Values
1 Length 2440 + 6 2442mm
2. Width 1220 + 3 1222mm
3. Thickness 12mm ± 5% 11.90mm
4. Squareness 2mm/1000 mm 0.95mm
5. Edge straightness 2mm/1000mm 0.50mm
Physical properties
6. Density 0.95 0.95
7. Moisture contents 5 -Â 15% 7.50%
8. Adhesion of plies (in dry state) Some adherent fibre distributed Satis
factory more or less uniformly
9. Adhesion of plies (in wet state) do Satisfactory
10. Glue shear strength (in dry state)
vg. Â 1000N 1260N
Ind. Â 800N 900N 2
2
12.
Tensile strength Along the grain 480kg./cm 525kg./cm 2
2
Across the grain 340kg./cm 370kg./cm 2
2
Total 820kg./cm 895kg./cm
13. Static bending strength
2
2
along the grain M.O.E.A
vg. Â 7500N/mm 8420N/mm 2 2
ind. Â 6700N/mm 6975/mm 2
2
Across the grain M.O.E.Avg. 4000N/mm 4800N/mm 2
2
Ind. 3600N/mm 4000N/mm2
Along the grain M.O.R.Avg.50 68N/mm
2
Ind. Â 45 50N/mm
2
Across the grain M.O.R. Avg. 30 47N/mm
2
Ind. 27 31N/mm 3
3
14.
Retention of preservative (ACC) 12 kg/m 12.95 kg/gm
15. My cological test
(a) Visual inspection (a) Show no separation sign
(b) Glue shear strength
Avg. 1000 N 1260 N
Adhesion of plies Ind. 800 N 910
Adherent fibre distributed Satisfactory
Special features of Magnus film faced shuttering plywood are:
Magnus film faced shuttering plywood is most effective in RCC constructions.
It has a smooth mirror like superior finishing on both surfaces.
It saves up to 45% of cost compared to other similar products due to more
repetition during shuttering work.
Its cross laminated structure between face veneer, core veneer and the film
again enhances the strength of ply.
After using it as shuttering plywood for many times, it can be reÃ?used for
paneling, roofing, flooring, partitions etc.
Magnus futuristic LVL is an engineered wood product, manufactured by
compressing multiple layers of thin wood. These are much less likely than
conventional lumber to warp, twist, bow, or shrink due to its composite nature.
Being highly stable dimensionally, these products are used for headers, beams, and edge Âforming material. NowaÂdays, door and window frames where wood was used, is also replaced by LVL.
Application : Shuttering, supports,beams, header, edge forming door frame, window frames, construction with wood.
Size : 2440, 2745, 3050 and 3200 mm
Thicknesses : 25, 37.5, 50, 75, 62.5, 100, 150, 200 mm
3
Density : 0.65 to 1.20 gm/cm
Magnus HBEAMS are designed and fabricated as per international standards. It is manufactured in such a way that it can bear heavy loads. HÃ? BEAMS are engineere wooden product which consists two flanges and one web beam. Flanges are purely light weight with high strength whereas web beams are made up of plywood or sandwich wood.
Applications : H Beams are used where require heavy load such as ceilings,
walls, bridges, tunnels, platforms, structure, shuttering,
platforms, formworks, columns etc
Sizes (Length) : 1200, 1800, 2450, 2750, 3050, 3200, 3650, 3950, 4270, 4570,
4600, 4880, 6100 mm
Advantages : Chamfered corners, multi repetitions, high load bearing
capacity, standard shape as per international norms, corners
covered withplastic caps etc.
Magnus chemical grade plywood is made by thin layered veneers of wood. The species of wood is used to produce this plywood are selected, high densities, oil and decay free, matured and high strength. It has got
excellent resistance to moisture, concentrated acids and alkalies, climate vagaries, wear and tear etc.
It is a unique and versatile engineering material. Magnus compregs are wood based synthetic resin laminates panel finds extensive application in industries where mechanical strength and resistance to moisture and chemical degradation are required.
APPLICATIONS:
Magnus Compreg Plywood For Chemical Industry are extensively used by various chemical industries like Fertilizer, Solvent Extraction, Zinc Plants, Vanaspati Plants,
Pharmaceuticals Refineries, Synthetic Resin Plants etc.
Thickness Available : 4 Mm To 100 Mm
(depending Upon Customer's Requirement).
Sizes Available :
3
Length (in Mm): 600 To 3200
Width (in Mm): 300 To 1675 �?¢ Density (in Mm): 1.25 To 1.4 Gm/cm
FIRE RETARDANT PLY FOR PREÂFABRICATED HOUSES AND BUILDINGS
Magnus plywood for prefabricated houses is the high strength and all
weather vagaries resistant plywood. It is made by hardwood species with single core veneer and using BWP grade E1 (Emission Level) standard adhesive for its internal bonding. It is suitable to human health due to free from formaldehyde emission. All the veneers are processed by jet type hot air dryers for its moisture equalization and uniform properties. This plywood is double pressed by cold and heating medium for high mechanical strength.
APPLICATIONS:
Useful for Prefabricated houses structural materials like roofs, walls, racks,
slabs, floorings, partitions, false ceilings, storage spaces etc.
THICKNESS AVAILABLE (IN MM): 3,6, 9, 12, 16, 19, & 25
3
Sizes Available: Length In Mm: 1220 To 3200
Width In Mm: 300 To 1675
Density : 0.65 To 0.75 Gm/cm
a. Name of product :- FILM FACE PLYWOOD 18MM , 12MM
b. Price of product :- FOB PRICE 300 USD
c. Product origin :- VIETNAM , RUSSIA , BRAZIL
d. Key Specifications/Special Features :- WE SUPPLY BEST QUALITY FILM FACE PLYWOOD WITH ACACIA CORE AND EUCALYPTUS CORE WITH MELAMINE GLUE AND WBP GLUE AS PER YOUR SPECIFICATION . WE USE BEST QUALITY FILM AS PER YOUR REQUEST . WE ALSO CAN DO YOUR LOGO FOR MOQ
FROM RUSSIA WE SUPPLY BEST QUALITY FULL BIRCH CORE FILM FACE PLYWOOD WITH 13 CORE LINE .
e. Harmonization System (HS) Code : 4412
f. Minimum Order Size : 3*40 HC
g. Packaging details :- EXPORT PALLET PACKING
H: - LOGO :- WE CAN MAKE YOUR COMPANY LOGO ALSO IF YOU WANT FOR MOQ FOR 5*40 HC
I :- SIZE:- WE MAKE 1220*2440 MM AND 1250*2550 AND ALSO SIZE AS PER YOUR CUSTOMIZED REQUEST
We are working with highly experienced packaging experts and they make every endeavor to meet the personalized and standard requirements of the clients. We sternly make our product safe from external factors. We, being a customer centric organization, make sure that the transactions are carried out by the professionals so as to avoid any kind of confusion. We sternly maintain payment records for the satisfaction of our clients.
Film faced shuttering plywood is cost effective and a super finisher.
In total it saves over 40 percent in finishing costs, which is a boom for construction industry.
