New Delhi Turbines Generator Transformers Tg Auxiliaries Non Destructi Suppliers and Manufacturers

Extraction condensing steam turbine The extraction condensing turbines are used when a constant pressure steam flow has to be extracted for process purposes. The constructional characteristics of these turbines are very similar to condensing turbines from the second admission valve chest it is possible to inject low pressure steam, available in the plant to supply the power required by the plant. These turbines are typically used for co-generation where the turbine meets both the power and steam demand of the process plant. In these type of turbines the power generated can be maintained more or less at a steady level despite variation in process steam demands. In some cases it may be necessary to have both bleed and controlled extraction steams from the condensing turbine. These turbines are of bleed cum extraction condensing type.

Back pressure turbines can either be single stage or multi-stage which are often used in industrial plants, the turbine serves as a reducing station between boiler and the process steam header. These turbines can either be used for drive application (Sugar mill drives, Sugar fibrizor / Shredder drive, Pump drives and so on) or power generation application in which case the turbine drives the generator. These turbines are straight-back pressure type and find application where back pressure steam is fully utilized to meet process demands. The power generation is incidental to the process steam demand. The back pressure turbine may also have bleed points (uncontrolled extractions) to satisfy steam demands at intermediate pressures, This provision is applicable when the bleed (medium pressure) steam volume demand is low and pressure variations can be tolerated. These turbines are of bleed cum back pressure type. The back pressure turbine with one controlled extraction point is possible, this extraction steam is also used to meet process steam demand at intermediate pressure when volume demand is high and pressure variations cannot be tolerated. These turbines are of extraction cum back pressure type.

ADVALENE Suture is non-absorbable, sterile surgical suture composed of an isotactic crystalline stereoisomer of polypropylene. The suture is coloured blue to enhance visibility. The advanced extrusion process of the polypropylene molecule gives ADVALENE: ADVALENE Suture is indicated for use in general soft tissue approximating and/or ligation, including use in cardiovascular, ophthalmic procedures, and neurological procedures. ADVALENE Suture complies with united state pharmacopeia requirement for Non- absorbable surgical suture. ADVALENE Suture elicit a minimal inflammatory reaction in tissue, which is followed by gradual encapsulation of the suture by fibrous connective tissue. ADVALENE Suture is not absorbed, nor is they subject to degradation or weakening by the action of tissue enzymes. As a monofilament, ADVALENE Suture is inert, resist involvement in infection and have been successfully employed in contaminated and infected wounds to eliminate or minimize later sinus formation and suture extrusion. Furthermore, the lack of adherence to the tissues has facilitated the use of ADVALENE Suture as a pull-out suture.

Steam turbines, gas generators, electrical control panels, alternators, reduction gear box & miscellenous material handling equipments and speciality bearings.Critical repairs & spares for all make steam turbines / Alternators

Diesel generators .

AC, DC electric motors, power transformers, diesel generator sets, cranes and machineries.

Steam turbines, steam turbines, sugar, steel, chemical, paper.Designing, manufacturing, installing and commissioning of steam turbines complete with auxiliaries and electronic governing system, engineering, assembling, supplying, installing and commissioning of complete package of turbo generator set.

Second hand electric motors, generators H T transformers.

Waste water treatment, DG Generators, Electronic Generating Set, Wind Turbines, Electrical Workshop Tools, Electrical, DG Generator Spare Parts, DG Generator .

3 nos. WARTSILA make HFO operated 18V32 series DG sets and its spares offered for sale, ready delivery and can be sold fully assembled or in spares available at price on weight basis delivery ex NEW DELHI.

Hydro turbine hydro generators switchyard equipment sales & services.

XLPE armoured and non-armoured power cables, medium voltage 1KV, XLPE armoured and non-armoured power cables, low voltage - 1KV, lsoh - low smoke halogen free cables, H07 (6491x) single core general wiring cables, 6242y, PVC insulated and sheathed twin with earth cables.

Escon Ribbed belts have a fibre-reinforced backing and a large Power Transmitting surface area which gives them high tractability and keeps the belt secure in the pulley. They generate little noise in running and ensure the reliable functioning of all auxiliary devices. Escon Poly belt provide high flexibility and great power performance as they combine the benefits of flat and V Belts. APPLICATIONS Suited for Passenger Cars, Multi utility vehicles (MUV) and Commercial vehicles.

Engine Valves Intake & Exhaust Valves and made from high grade valve steel (Non magnetic - exhaust valve to resist heat) Engine Valves are also made with chrome plating and have applications in Industrial, automotive valves, marine engine valves, oil engine valves, diesel engines and generators.

No : JJ-801.1 " A.C./D.C. POWER SUPPLY UNIT " Provides output 0-20 volts d.c. and 0-25 volts a.c continuously variable at 10 Amps. with dual scale. Deluxe meter to read volts ac/dc. Output is provided at 4 mm socket terminals separate for a.c. and d.c. ON/OFF switch, indicator and two output safety fuse. The unit is enclosed in a ventilated steel painted cabinet. No : JJ-801.2 " A.C./D.C. POWER SUPPLY UNIT " Provides output 0-20 volts d.c. and 0-25 volts a.c continuously variable at 5 Amps. with dual scale. Deluxe meter to read volts ac/dc. Output is provided at 4 mm socket terminals separate for a.c. and d.c. ON/OFF switch, indicator and two output safety fuse. The unit is enclosed in a ventilated steel painted cabinet. NOTE: On request following ranges of power supplies are also available :- Model Number *JJ-797.1 L.V. POWER SUPPLY AC/DC *JJ-798.1 H.T. POWER SUPPLY UNIT *JJ-799.1 5KV EHT SUPPLY *JJ-799.2 6KV EHT SUPPLY *JJ-800.1 L.T. POWER SUPPLY UNIT (D.C. Power Supply) *JJ-802.1 MULTITAP TRANSFORMER *JJ-803.1 SIGNAL GENERATOR,1 Hz to 100 K Hz *JJ-804.1 SIGNAL GENERATOR AND AMPLIFIER *JJ-805.1 OHMS LAW APPARATUS *JJ-806.1 HELMHOLTZ COILS *JJ-807.1 UNIVERSAL STAND.

Efficient Distribution of energy resources (DERs) could lead to a flexible and sustainable energy network. Arnowaâ??s Virtual Power Plant (VPP) decentralises DERs by aggregating and optimising their distribution network. We reimagine the use of existing infrastructure to share power and create new revenue streams for collaborators. The VPP solution coupled with Arnowaâ??s Energy Management System (EMS) software measures and monitors real-time power generation and consumption. By aggregating and controlling the DER network, the EMS optimises power management and redistributes power from prosumers to consumers. With smart inverter management and active and reactive power quality control, the stress on non-renewable power consumption is reduced, leading to a lesser carbon footprint.

SD-100 the winning warrior against Viruses & Bacterias. SD-100 is a next generation Surface disinfectant that is highly effective in Sanitizing people and Surface materials. Sd-100 is a versatile Surface disinfectant, especially designed to completely eradicate bacteria, fungi and Viruses on all kinds of Surfaces. It's developed with a rare blend of twin chain Quaternary Ammonium compounds with high quality Surfactants and stabilizers, which are proven to have optimal effectiveness against bacteria and viruses. BENEFITS: Activation time is very short. E.P.A compliant. Human and environment friendly. Its pH neutral and chlorine free. SD-100 is a more stronger and effective than sodium hypochlorite. Non corrosive nature. Leaves no bad odor after application. The amount of decomposition of this product by ultraviolet is low. No discoloration of bright coloured Surfaces - safe formulation. Cost effective flexible dosage for application. APPLICATION : Offices, Factories, Hotels, Hospitals, Banks, Shopping Malls, Airports, home & Apartments, Gyms, Colleges & Schools, Saloons, Studios, Showrooms, Cars and areas in industries such as Pharmacy, Paper , Textile and Garment Industry Any public, private or commercial establishment can be disinfectant using SD-100 Disinfection of Railway platforms, Floors, Corridors and every possible infection prone areas DOSAGE - 1:50 i.e. (mix 1L of SD-100 with 50L water) Packaging - SD-100 is available in 5kg and 50kg

Product Specification The inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing.> This conical geometry is used as it gives a larger contact patch, which permits greater loads to be carried than with spherical (ball) bearings, while the geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs. When a roller slides rather than rolls, it can generate wear at the roller-to-race interface, i.e. the differences in surface speeds creates a scrubbing action. Wear will degenerate the close tolerances normally held in the bearing and can lead to other problems. Much closer to pure rolling can be achieved in a tapered roller bearing and this avoids rapid wear. The rollers are guided by a flange on the inner ring. This stops the rollers from sliding out at high speed due to their momentum. The larger the half angles of these cones the larger the axial force that the bearing can sustain. Tapered roller bearings are separable and have the following components: outer ring, inner ring, and roller assembly (containing the rollers and a cage). The non-separable inner ring and roller assembly is called the cone, and the outer ring is called the cup. Internal clearance is established during mounting by the axial position of the cone relative to the cup.

11 kv & 33 kv ring main unit, switchgear , compact , transformers, servo voltage stabilizer, diesel generator set, metering panels, ct pt, cables, ht termination kits and accessories..