The house of ARS BRAND RECYCLING MACHINES proudly introduces HORIZONTAL SCRAP SHEAR IN INDIA to solve all scrap processing problems of a Melting Furnace with a single machine without any labors only need one operator. OPERATION of ADVANTAGE Brand Horizontal Scrap Shear 600 On the Scrap Shear the PLC interface should show Home Position, (in one of the 3 programs) in this position Push the Auto cycle Button and start charging the Mixed Scrap consisting of Commercial, HMS 2, HMS 1 can be put without any sorting by a Grab/Magnet into the Hopper of the Horizontal Shear, on a continuous basis, within minutes you will see the scrap sheared in size of max height 16 coming out of the front end of the Shear. The charged scrap is first pre-compressed first hydraulically at 3 levels, densities than Sheared the cut size of max height 16 length These 16 long pieces are perfectly fit to be charged as first charge Furnace lift the out coming scrap with magnet and take to the furnace for melting. TYPESOF SCRAP ADVANTAGE BRAND HORIZONTAL SHEAR CAN PROCESS ; ,HMS 2 ,PIPES & STRUCTURES ,SHEET AND PLATES ,CAR BODIES ,MIXED SCRAP
We are in a position to supply large tonnages of hms, copper cable scarp and aluminium cable scrap, on ex-plot basis in india. Parcel sizes- in lots of 5000 mt of hms, 100-300 mt of copper and aluminium cable scrap. Interested parties, who have the financial clout to buy may please contact us for analysis reports of copper and aluminium scraps. Prompt supplies. On receiving specific requirements, we shall forward terms and conditions.
METALS (Aluminium scrap, Copper Scrap, Copper Cathode, Stainless Steel, Used Rail, etc.), TEXTILES (Yarns, Cotton waste, Comber Noil, etc.), PLASTICS (Hdpe, Ldpe, PP, Granules, etc.), PAPERS (Wastepaper, corrugated boxes, etc.,), and all PETRO CHEMICALS (Methanol, Acetic Acid, MDC, Phenol, Toulene, MIX XYLENE, IPA, MIBK, etc.), PAINTS ADHESIVES ETC.
Used rails Hms1/2, used rails, shredded steel scrap ( isri 210-211) Containers
Hello, Vessel available for Scrap. Japanese Built Gross Tonnage almost, 1700 and asking Price approximately 4 Lakh USD Contact for More Details.
Heavy melting steel (HMS) or heavy melting scrap is a designation for recyclable steel and wrought iron. It is broken up into two major categories: HMS 1 and HMS 2, where HMS 1 does not contain galvanized and blackened steel, whereas HMS 2 does. The Institute of Scrap Recycling Industries breaks up the categories further:[1] ISRI 200 (HMS 1): Wrought iron or steel scrap 1â??4 inch (6.35 mm) and larger in thickness. All pieces must be smaller than 60 in Ã? 24 in (1,524 mm Ã? 610 mm) ISRI 201 (HMS 1): Same as ISRI 200 except pieces must be smaller than 36 in Ã? 18 in (914 mm Ã? 457 mm). ISRI 202 (HMS 1): Same as ISRI 200 except pieces must be smaller than 60 in Ã? 18 in (1,524 mm Ã? 457 mm). ISRI 203 (HMS 2): Wrought iron or steel scrap, black and galvanized, 1â??8 inch (3.175 mm) and larger in thickness. ISRI 204 (HMS 2): Same as ISRI 203 except pieces [1]must be smaller than 36 in Ã? 18 in (914 mm Ã? 457 mm). ISRI 205 (HMS 2): Same as ISRI 204 except it may contain automotive scrap except for thin gauge material. ISRI 206 (HMS 2): Same as ISRI 205 except pieces must be smaller than 60 in Ã? 18 in (1,524 mm Ã? 457 mm). HMS 1 and 2 are widely traded, particularly in the western hemisphere. Both HMS 1 and 2 comprise obsolete scrap only - iron and steel recovered from items demolished or dismantled at the end of their life. Because both grades guarantee a minimum piece thickness â?? at least 1â??4 inch (6.35 mm) for HMS 1, and 1â??8 inch (3.175 mm) for HMS 2 â?? consignments have a high density. Both also have defined maximum dimensions (usually 60 in Ã? 24 in or 1,524 mm Ã? 610 mm), and should be prepared to facilitate handling and charging to a furnace. This density, sizing and preparation makes for efficient furnace operation by minimising the time to charge enough scrap for a full melt. In contrast, thin mixed scrap greatly increases charging time, cutting furnace productivity. Variations on maximum piece size are covered by ISRI (North Americaâ??s Institute of Scrap Recycling Industries) codes. HMS is usually traded as a blend of 1 and 2, either a premium blend (80:20) or lower grade mixes (70:30) and (60:40). Other major heavy scrap grades include Japanâ??s H2 and A3 from the CIS.[2]
Tin Plate.
Tin plate sheets, tinfree sheets misprints & crc sheets.
There are two different types of stainless steel scrap. Austentic is Non Magnetic steel scrap and Martinsite is magnetic steel scrap.
Misprint Tin Plate, Tin Plate Circle, Tin Preesd Bundle.
Used rail origin at buyers selection
Copper Millberry Usage: Electrical, Light Industry, Machinery, Building Industry, National Defense Industry Copper Scrap Is Industry A Important Sources Of The Raw Materials All Kinds Of Can Be Recycled Recycling Waste Production With Copper Specification:
You can easily grind waste with this machine.
Alloy free carbon steel scrap ¼'' and over in thickness with a max dimension 4’ x 2’. Individual pieces must lie flat and be free from any attachments. It can include flattened pipe of 4’’ diameter and over.
I am leading exporter of copper powder with purity
Tin plate coils, tin mill black plate coils, galvanised coils , cold rolled coils, pre painted coils, CRGO (cold rolled grain oriented) electrical steel coils.
Aluminum, lead, tin.
Aluminum coil, foil, tin.
Tinplate sheet, tinplate coils, misprint sheets, cold rolled, hot rolled, ppgi, waste paper.
Plastic scrap.
