Used injection moulding machine.
Furniture, recycled furniture, industrial furniture.
Botanical Name - Emblica officinalis/Phyllanthus emblica Category - Medicinal Form - Dry Part Used - Fruit General Information - Indian gooseberry or amla, scientifically known as Emblica officinalis Gaertn or Phyllanthus emblica Linn, is arguably the most important medicinal plant in the Indian traditional system of medicine, the Ayurveda, and in various traditional folk systems of medicine in the Southeast Asia. The fruits are a rich source of vitamin C and are of dietary and culinary use in India. In the traditional system of medicine, amla is used to treat a variety of ailments such as anemia, hyperacidity, diarrhea, eye inflammation, leucorrhea, jaundice, nervine debility, liver complaints, cough, and anomalies of urine. Scientific studies have shown that amla possesses antibacterial, antifungal, antiviral, antidiabetic, hypolipidemic, antiulcerogenic, free radical scavenging, antioxidant, antimutagenic, antiinflammatory, immunomodulatory, antipyretic, analgesic, antitussive, antiatherogenic, adaptogenic, snake venom neutralizing, gastroprotective, antianemia, antihypercholesterolemia, wound healing, antidiarrheal, antiatherosclerotic, nephroprotective, neuroprotective, and hepatoprotective properties. In this update, we emphasize on the hepatoprotective effects of amla by emphasizing on the scientific studies that have validated the property. Phytochemicals - "Emblica officinalis primarily contains tannins, alkaloids, phenolic, amino acids and carbohydrates. Its fruit juice contains the highest amount of vitamin C (478.56 mg/100 mL). The fruit when blended with other fruits boosted their nutritional quality in terms of vitamin C content. Compounds isolated from Emblica officinalis were galic acid, ellagic acid, 1-O galloyl-beta-D-glucose, 3,6-di-Ogalloyl- Dglucose, chebulinic acid, quercetin, chebulagic acid, corilagin, 1,6- di-O -galloyl beta D glucose, 3 Ethylgallic acid (3 ethoxy 4,5 dihydroxy benzoic acid) and isostrictiniin. Phyllanthusemblica also contains flavonoids, kaempferol 3 O alpha L (6'' methyl) rhamnopyranoside and kaempferol 3 O alpha L (6''ethyl) rhamnopyranoside. A new acylatedapigenin glucoside (apigenin 7 O (6'' butyryl beta glucopyranoside) was isolated from the methanolic extract of the leaves of Phyllanthus emblicatogether with the known compounds; gallic acid, methyl gallate, 1,2,3,4,6-penta-O-galloylglucose and luteolin-4'-Oneohesperiodoside were also reported"
Botanical Name - Lawsonia inermis Category - Cosmetic/Medicinal Form - Dry Part Used - Leaves General Information - Lawsonia inermisLinn (Lythraceae) is a perennial plant commonly called as Henna, having different vernacular names in India viz., Mehndi in Hindi, Mendika, Rakigarbha in Sanskrit, Mailanchi in Malayalam, Muruthani in Tamil, Benjati in Oriya, Mayilanchi in Kannada and Mehedi in Bengali. In several countries it is cultivated on a large scale toobtain leaves to dye hands and hair. It is a glabrousbranched shrub with greyish brown bark. Its leavesare elliptic, acute and often mucronulate with smallwhite or rose-colored fragrant flowers. The seeds areapproximately pea size with numerous pyramidal andsmooth shapes. Traditionally, a paste of leaves isused to prevent skin inflammation, cure ulcersand wounds. Its leaves have also been used as anexpectorant, constipating, haematinic, febrifuge,cough, burning sensation, hemicranias, cephalagia,diarrhoea, dysentery, leucoderma, leprosy, boils,scabies, hepatopathy, anemia, hemoptysis, fever andopthalmia. Phytochemicals - The plant has wide range of phytochemicals including lawsone, isoplumbagin lawsoniaside, lalioside, lawsoniaside B, syringinoside, daphneside, daphnorin, agrimonolide 6-O-�²-D-glucopyranoside, (+)-syringaresinol O-�²-D-glucopyranoside, (+)-pinoresinol di-O-�²-D-glucopyranoside, syringaresinol di-O-�²-D-glucopyranoside, isoscutellarin3�², hennadiol, (20S)-3�², 30-dihydroxylupane, lawnermis acid, 3-methyl-nonacosan-1-ol, laxanthones I, II, III and lacoumarin etc. The various studies of L. inermis reported the plant to have antibacterial, antifungal, antiparasitic, antiviral, anticancer, antidiabetic, tuberculostatic, anti-inflammatory, antifertility and wound healing properties. This review discusses on the botany, traditional use, phytochemistry and pharmacological data of the plant. Lawsone (2-hydroxy-1,4-naphthoquinone), also known as hennotannic acid, is a red-orange dye present in the leaves of the henna plant (Lawsonia inermis) as well as in the flower of water hyacinth (Eichhornia crassipes). Humans have used henna extracts containing lawsone as hair and skin dyes for more than 5000 years. Lawsone reacts chemically with the protein keratin in skin and hair, in a process known as Michael addition, resulting in a strong permanent stain that lasts until the skin or hair is shed.
Botanical Name - Crocus sativus Category - Spices Form - Dry Part Used - Flower Bud General Information - Crocus sativus L. (Iridaceae), commonly known as saffron, is a perennial stemless herb that is widely cultivated in Iran and other countries such as India and Greece. Commercial saffron comprises the dried red stigma with a small portion of the yellowish style attached. The flowers are hermaphrodite (have both male and female organs) and are pollinated by bees and butterflies. The plant prefers light (sandy) and medium (loamy) soils, requires well-drained soil, and can grow in nutritionally poor soil. The flower has three stigmas, which are the distal ends of the plant's carpels. Together with the style, the stalk connecting the stigmas to the rest of the plant are often dried and used in cooking as a seasoning and coloring agent. Saffron blooms only once a year and should be collected within a very short duration. It is picked during 3-4 weeks in October-November. Phytochemicals - Saffron contains more than 150 volatile and aroma-yielding compounds. It also has many non-volatile active components, many of which are carotenoids including zeaxanthin, lycopene, and various �±- and �²-carotenes. The volatiles with a very strong odor are consistent of more than 34 components that are mainly terpenes, terpene alcohols, and their esters. Non-volatiles include crocins that are responsible for the red or reddish brown color of stigmas together with carotenes, crocetin, picrocrocin (a glycosidic precursor of safranal), the bitter substance and safranal the major organoleptic principle of stigmas. However saffron's golden yellow-orange color is primarily due to -crocin. This crocin is trans-crocetin di-(I-D-gentiobiosyl) ester.
Dining chair rattan back chairs.
Hydrated lime, quick lime (calcium hydroxide & calcium oxide) for bleaching powder, sugar mills, steel mills, calcium based products, di calcium phosphates, cement paint, pigments, wall putty.
Hydrated lime % of available lime as ca(oh)296+1+94+93+92+90+85+80+75+70+65 40kgs
Plastic Food Containers And Biodegradable Food Containers..
The main characteristics is a superior wear resistance: Severe wear on the surface has a work-hardening effect on the austenitic structure of this steel. This, when combined with the level of carbon in accordance with the international standards, leads to an increase in hardness from 200BHN (in as delivered plates) up to an in-service hardness of at least 600BHN. Typical Applications: · Quarries and Constructions: Earth moving crusher jaw, grizzly, screen, stone chutes, chain guide and shredder plates, shovel buckets. · Mines: Bucket blade of loader, chain conveyor parts, sprocket wheel, various armouring elements. · Iron Industry, Foundry: Guiding and shifting plates, scraps container, liner of shot blasting unit, pedestal liner, flanged bolster cup, wear liner. · Concrete and Brickworks: Core and dividing wall of parpen mould, grinding mill scraper, mixer paddle. · Scraps â?? Recoveries: Wheel disk, striker and hammer mill. · Automotive Industries: Shot blasting equipment. It is also used for its low coefficient of friction in metal-to-metal applications, its non-magnetic properties in electrical transformer assemblies and for industrial lifting magnets. A high manganese, fully austenitic, quench annealed, non magnetic, work-hardening steel with an exceptionally high level of wear resistance when subjected to work-hardening by shock or high impact pressure in service. The main characteristics is a superior wear resistance: Severe wear on the surface has a work-hardening effect on the austenitic structure of this steel. This, when combined with the level of carbon in accordance with the international standards, leads to an increase in hardness from 200BHN (in as delivered plate) up to an in-service hardness of at least 600BHN. This work-hardening capability renews itself through out in-service life.The underlayers not work-hardened maintain an excellent resistance to shock and a very high ductility.
JG-KSB BLASTER is safe, high productivity and long life wear and tear parts as compare to others. The portable abrasive blaster is works on 'Direct Pressure System' resulting in very high cleaning rate and more economical system by Manual blasting, It's manufactured as per IS-2825 and hydraulically tested for 250 psi. The machine is supplied with long life tungsten carbide lined nozzle, anti-static blast 1hose, alloy steel wear and tear parts, with/without remote control for on /off and remote control versions are denoted with suffix "R", Remote control system is complete pneumatic control, when handle is activated blasting begins and when the handle is released the system releases air from the machine to allow for filling of abrasives: OPERATOR'S SAFETY WEARS JG-KSB are offered to safety wear for operator safe, comfortable and Hazard free working, in abrasive blasting operation dust and noise are generated so operator need protection in such environment. Air fed Helmet Helmet Air conditioner Air breather, Operator's suit Hand gloves Gum boots APPLICATION Mould / Die Cleaning De-Sanding De-Scaling Preparation of surface for protective coating De Rusting Etching De-Buring SPECIFICATION FOR OUR STANDARD PORTABLE BLASTER JG-KSB-P7-1001R 10CFT-1000KG METALIC GRIT, 15 TO 20 SQMTR PRODUCTION CAPACITY, NOZZLE 10/12mm, BLASTING HOSE 32mm, 240CFM AT 80PSI COMPRESSED AIR REQUIREMENT APPROX 75HP, FOR 12-80MESH GRIT, 250KG EMPTY WT., DIAxHT 800x1600mm. JG-KSB-P7-501R 5CFT-500KG METALIC GRIT, 9 TO 12 SQMTR PRODUCTION CAPACITY, NOZZLE 8mm, BLASTING HOSE 25mm, 135CFM AT 80PSI COMPRESSED AIR REQUIREMENT APPROX 40HP, FOR 16-80MESH GRIT, 190KG EMPTY WT., DIAxHT 610x1400mm. JG-KSB-P7-301R 3CFT-300KG METALIC GRIT, 4 TO 7 SQMTR PRODUCTION CAPACITY, NOZZLE 6mm, BLASTING HOSE 19mm, 70CFM AT 80PSI COMPRESSED AIR REQUIREMENT APPROX 25HP, FOR 25-80MESH GRIT, 150KG EMPTY WT., DIAxHT 365x1300mm. JG-KSB-P7-150 1.5CFT-150KG METALIC GRIT, 3 TO 4 SQMTR PRODUCTION CAPACITY, NOZZLE 5mm, BLASTING HOSE 19mm, 45CFM AT 80PSI COMPRESSED AIR REQUIREMENT APPROX 15HP, FOR 35-80MESH GRIT, 100KG EMPTY WT., DIAxHT 365x1100mm.
