Find Verified Industrial Valves Gauges Suppliers, Manufacturers and Wholesalers

A182 F51 Duplex Stainless Steel Gate Valve

Main features
* Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request

* Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500.

* Bellows-sealed Gate and Globe valves available in Class 800

* Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks

* Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor

* T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598

* Rolled ACME thread on stem for smooth operation

* Tapered shoulder on the stem for back seating

* Self-aligning type gland assembly with stud-and-nut tightening

* Integral hard-faced body seat for globe and check valves

* Spring-loaded disc on check valves suitable for no horizontal applications too

* Gate and globe valves can be offered with electrical actuators

* Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion

* Valves can be offered to NACE MR-0175 and other special NACE requirements

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size �¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size ¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option

* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.

* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D

* Wide portfolio of Side-entry and Top-entry designs

* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH

* Firesafe design - to API 607 and API 6FA

* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic

* cavity relief

* Anti-blowout stem design

* Coil springs used for consistent seat loading and lower operating torque

* Lip seals provided for low temperature services

* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)

* Wide portfolio of Side-entry and Top-entry designs

* Options: Buried service, Cryogenic

* Offered with Electric, Pneumatic and Hydraulic Actuators

* In-house Tests Capabilities

* Fire-safe to ISO 10497 and API 607

* Mirror-finished solid stainless ball

* Fine-grained PTFE seats

* Cavity Pressure Relief mechanism

* Blowout-proof stem

* High integrity stem sealing �¢?? Belleville springs compensate for wear and thermal expansions

* Size 2" to 56" (50 mm to 1400 mm)

* ASME Class Class 150 to 2500

* Design Standard API 6D

* Size �¼" to 8" (8 mm to 200 mm)

* ASME Class Class 150 to 2500

* Design Standard ISO 17292, API 608, API 6D

* Antistatic feature

* Actuator-mounting flange conforms to ISO 5211

* Single, two and three piece constructions

* Full-bore and regular-bore designs

* Soft and metal-seated

* Offered in carbon steel, stainless steel and duplex stainless steels

* Screwed, socket-weld and flanged ends

* ASME classes up to 2500

* Variety of actuation option