Built on heavy duty and proven platform, The Tirrana range of helical rotor pumps offers a peace of mind solution to all types of surface water transfer duties
Material Options
Wettable Housing Parts: Cast Iron
Rotor: Stainless Steel 410, Hard chrome plated
Stator: Natural, Nitrile
Shaft and Coupling Rod: Stainless Steel 410**
* Above material options are standard for Tirrana Range, contact Roto for other material requirement
** With gland packing, Shaft is Hard chrome plated under gland area.
Applications:
Ideal for tank filling or stock watering from dams, creeks, wells and rivers.
Can handle clean water, brown water, dirty water with sand, silt or algae.
Price range: Rs. 25000 to Rs. 10 Lacs*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Cost effective way to protect pumps
macerate the solid and fibrous components in pumped products . Increases operational safety, extends service life of downstream equipment and reduces operating costs.
Advantages to End Users :
Optimal cutting performance
Less spare parts
Fewer spare parts
Reduced downtime for routine servicing process
Creation of pre-conditioned medium
Lower running costs
Typical Applications :
Food products and waste
Slaughterhouse waste
Mud contaminated drill cutting
Municipal and industrial effluent treatment
Price Range: Rs.100000- Rs.10,00,000*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Fetaures and Benefits :
Low Vibration
Excellent abrasive liquid resistance
very compact design
up to 35% lower air consumption
Operating in each position
Dry running capability
Low maintenance cost
High strock frequency means low liquid pulsation
Equipped with PEEK flat valves
Low Noice
Price Range: Rs.30000-Rs.100000*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
Roto s Vertical Twin Screw Pumps are available in both external & internal bearing configuration. Pumps with steam jackteing as an option is also available. The suction & discharge ports are in a line.
Mechanical seals are standard. Option for gland packing is also available. Pumps are fitted with relief valves suitable for 100% bypass.
Vertical Internal / External Bearing RV series
Capacities upto 500 m3/hr
Pressures upto 40 bar
These pumps are designed to suit the areas where space is a constraint. They are available in internal as well as external bearing configurations. These pumps can handle fluids with high temperatures upto 3500C / 6600F with or without steam jacketing, electrical/steam tracing arrangement as an option. API 682 type seals can be mounted. Built in safety relief valve designed for 100% bypass.
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
These pumps are designed for handling food applications. All metallic parts in contact with the medium being handled are fabricated in smooth finish stainless steel. These pumps are provided with metal bonded aseptic food grade elastomeric stator resistant to oil & fats. These pumps are standard with closed universal joints enabling it to handle fluids which are poor lubricants like aerated or dematerialized water as well as lubricating type applications. Available in close coupled and bare shaft configuration. Sealing is by Hygienic quality packed gland or Mechanical Seal. These pumps are also available with CIP port configuration. For high viscous and difficult to flow liquids these pumps are also available with wide throat configuration.
Single Stage Pump:
These Heavy Duty semi-hygienic pumps are specifically designed for Wine & beverage transfer applications and can also be used for other Food & Beverages applications. Standard connections include IDF, SMS & RJT.
Multi Stage Pump:
These Heavy Duty semi-hygienic pumps are specifically designed for Wine & beverage transfer applications and can also be used for other Food & Beverages applications. Standard connections include IDF, SMS & RJT.
Stator:
Nitrile Black Nitrile White EPDM Black EPDM White Fluoroelastomer
Rotor:
Stainless Steel
Coupling Rod:
Stainless Steel
Shaft:
Stainless Steel.
Other Exotic Materials:
Duplex Super Duplex Alloy 20 Haste alloy.
Price Range: Rs. 50,000-Rs. 500,000*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
2004 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
Roto Xtra Value Progressive Cavity pumps are of heavy-duty construction and are designed to pump â??tough â?? to â?? handleâ?? fluids with ease. These pumps are used in many areas of Industry. The construction of these pumps is based on the modular concepts and incorporates next-generation pumping elements (molded to metal) stator, solid shaft and double sealed Cardan Universal Joints for improved performance and longer service life. These pumps are available in bare shaft and close coupled configuration. 6 and 8 stages in select sizes. A variety of material of construction, shaft sealing options are also available.
Single Stage Pump:
This Heavy-Duty cost effective pumps use the extended Rotor, Stator Geometry and result in lower rubbing velocities which are ideal for the Sewage & Effluent Treatment applications. These Pumps are available in Close-Coupled & Bareshaft Configuration.
Multi-Stage Pump:
These heavy-duty pumps are designed for continuous or intermittent duty and are suitable to perform efficiently even for the most difficult fluid handling applications in wastewater,chemical, and food industries. These pumps are available in bare shaft and close coupled configurations. 6 and 8 stage pumps are also available in select sizes.
Rotor: Tool Steel Case Hardened Steel Alloy Steel Stainless Steel
Coupling Rod: Alloy Steel Stainless Steel
Shaft: Alloy Steel Stainless Steel
Other Exotic Materials: Duplex Super Duplex Alloy 20 Haste alloy
Rotor Surface Coatings: Ceramic Coatings Tungsten Carbide Hard Chrome Plating
Protective Coatings: Rubber Lining Epoxy Coatings
Price Range: Rs. 25000 to Rs. 20 lacs*
* Minimum prices are mentioned for smallest model Bare Shaft Pump. Prices may vary for complete Pump set with motor & accessories and for exotic material options or customized pumps.
The range of Water Filter Gravel and Support Pebble that we offer, is spherical in shape and allows even distribution in support beds and good flow. It is quite similar to Filter Sand in properties, but the only difference is its shape. These are free from calcium and are very effective in the case of softeners, as this helps in maintaining the quality. Support gravel acts as a support for the filter media and forms the lower levels of the filter bed.
Able Engineering is leading manufacturer of four point centrifuge machine. A centrifuge is the most energy efficient machine that separates solid from liquid.
A centrifuge is the most energy efficient machine that separates solid from liquid. It is widely used in pharmaceuticals plants, Herbal and Solvent Extraction Plants and Chemical Plants.
Material: Metal, stainless steel
Metal Type: Stainless Steel
Type: Pump Sprayer, Bath lotion accessories
Usage: Bottles 28mm
Feature: Non Spill
Place of Origin: India
Model Number: PUMP003
Design: Modern
Finish: Mirror, matte, golden and any
Dosage: 1cc / 2cc
Application: bath lotion, bath gel, shampoo, hair conditioner, hand sanitizers, etc
MOQ: 1000pcs
Packaging details: 1pc/ small pp bag,500pcs/ctn
The water supplied by the solar water pump can be used to irrigate crops, water livestock or provide potable drinking , cooking and sanitation water. A solar water pump system is essentially an electrical pump system in which the electricity is provided by one or several Photo Voltaic (PV) panels.
Indoma Products.
Being light weight and with a convenient pick up Handle, it is easy to carry.
With very low, unmatched power consumption, you need not worry about high electricity bills.
High Grade Components and superior motor winding ensure longevity and uninterrupted working.
Multiple testing of pumps at each stage ensures pumps remain trustworthy and safe.
Indoma Industries Pvt. Ltd. revolutionized the desert cooler industry by introducing a technological marvel- Littelpump back in 2002. Due to its numerous advantages, it made the vertical pump obsolete in no time. Littelpump uses PMT technology which ensures long life and relief from calling electrician to change the pump every year.
Allied Electricals is leading manufacturer of Industrial Coolant Pumps.we offer wide range of high-quality pumps to different industries.We also manufactures and indirectly exports CP and CPM Coolant Pumps,Our coolant pump machines are versatile, cost effective and robust, producing high quality goods at reasonable rates.
KINDLY CHECK THE DESCRIPTION SENT ABOVE AND IF THEIR IS ANY ENQUIRY PLEASE LET US KNOW, OR MAIL AT
led1@pcianalytics.in
The high performance liquid chromatography (HPLC) pump is designed to be a reliable component within a basic analytical or sophisticated research instruments.
Pump Features
Can easily be modified for analytical and semi-preparative
techniques.
Incorporates a diaphragm-type pulse damper which reduces
pulsation in the system by as much as 90%
Integrated prime/purge valve.
Self-flushing pump head.
LED readout on the front panelâ??shows the flow rate.
Tactile response, chemically resistant front panel keypad.
Microprocessor advanced control.
Digital stepper motor design prevents flow rate drift over time and
temperature, which is a common problem found in analog design.
Back panel RS232 serial communications port for complete control
and status monitoring.
Centrifugal pumps require in CI, CS, SS 316 & SS 316 L, alloy 20 material of construction.
Ball, Gate, Globe, Check n butterfly valves with actuators.
Protego make flame arresters n Breather valves.
Vacuum pumps n hydro pneumatic systems.
The Edwards 80 E2M80 direct drive rotary vane pump is inherently compact and vibration free with an ultimate pressure of 7.7x10-4 Torr and a pumping speed of 53 CFM at 60 Hz.
2004 Industrial Pumps Suppliers
Short on time? Let Industrial Pumps sellers contact you.
