Shell 4 mm thk S.S. 316
Top Flange 16 MM THK RING S.S. 316
Top Lid Loose Type in two pieces 16 swg S.S. 316. or top dished as per clients requirement.
Jacket S.S. 304. 6 mm thk with spiral stiffeners
Insulation 50 mm thk glaswool cladded with with S.S 304 with 16 Swg Welded.
Conections 25 NB, bottom valve, Jacket : Steam Inlet , condensate outlet, Jacket Drain with plug, Water Inlet is provided.
Legs 40 NB, Heavy Guage S.S. pipe S.S.304. 4 nos.
Sensor PT-100 for Digital Indicator.
Jacket Pressure 3.5 Kgs.cm.sq working.
Stirrer Suitable H.P. /960 R.P.M /440V/TEFC mounted on side or from the bottom of wax vessel & Water vessel. Agitator will be propeller type
Finish Internal and all contact parts buffed to 240 grit mirror finish and external bufed to 150 grit matt finish.
B) MANUFACTURING VESSEL
Material of construction :
Shell 6 mm S.S. 316.
Bottom Hemispherical 6 mm S.S. 316
Top Dish Type 6 mm Thick S.S. 316.
Flanges 16 mm thick S.S. 316
Jacket 6 mm thk SS. 304 with spiral patten Stiffeners . cladded with 16 swg S.S 304 welded.
Gasket silicon fitted in groove.
Insulation 50 mm Thick Glasswool with 16 swg S.S. 304 cladding welded.
Legs 3 nos S.S. pipe heavy guage.
Connection Light Glass, Sight glass, Wax inlet, Water Inlet
Nozzels Vacuum Manifold with Vacuum Gauge, Vacuum Nozzle and vent Valve, product outlet , bottom full bore ball valve S.S. 316.Jacket steam inlet, condensate outlet, Drain Plug, Cooling water inlet, Cooling Water Outlet, Manifold with safety valve, Pressure gauge etc.
Bottom Clearance 500 mm from ground level to valve or as required.
Agitator Anchor type S.S. 316 . driven by suitable HP dual rpm motor coupled with gear box.
Bearing Housing Angular Roller Bearing 2 Nos Mounted on a Lantern support caldded with S.S. 304 sheet. S.S. 304 guard is provided.
Homoginizer Bottom Entry High speed Emulsifier of suitable H.P. /440V/1440 RPM/TEFC Motor.
Shaft Seal Mechanical Seal with cooling Arrangement mounted on a conical portion.
Sensor PT-100 type will be provided.
C) PRODUCT PIPE LINE :
Pipe line will cover the following :
1) Water phase vessel to Mixing vessel thru pump
2) Wax phase vessel to Mixing Vessel thru pump & conical filter
3) Mixing Vessel for re-circulation
4) Mixing vessel to Storage Vessel through lobe pump.
5) Storage vessel to hopper of filling machine through transfer pump.
All pipe are seamless & electropolished from inside and outside. Fittings are DIN standard with silicon gasket.
D) ELECTRIC CONTROL PANEL :
It shall consist of
a Main isolator
b DOL starter for Anchor drive
c DOL starter for HSE motor
d Machine light switch for main Mixing Vessel
e Electrical Digital temperature indicator for all vessel
f. Fuses for all motors
g. Ammeter for anchor and HSE motors
h. Indicating lamps for main ON & OFF with selector switch.
i. DOL starters for propeller agitators of Wax & water Phase vessels
j. DOL Starters for all the pumps
E) PUMPS:
CENTRIFUGAL PUMP
Rate : 400 Ltrs/Hr
MOC : SS 316Q
Inlet & Outlet : DIN fitting with T connection at inlet & outlet
Above pump is used to transfer wax & water to the main mixing tank.
BUMP PUMP :
Above pump is used to recirculate final mixed cream for intense mixing & to transfer finished cream from Mixing vessel to storage vessel. Other details are as below.
1) Type : Twin BUMP
2) Design : Sanitary
3) Drive : suitable HP, 200 RPM gearbox & motor
4) Seal : Teflon bush
5) Mounting : Trolley mounted , MOC ? SS304Q
6) Inlet & outlet : DIN fittings / triclover at inlet & outlet.
7) MOC : SS 316Q for contact parts
TRANSFER PUMP ? RECIPROCATING TYPE, POSITIVE DISPLACEMENT & METERING TYPE
Above pump is used to transfer CREAM/OINTMENT from storage vessel to hopper of filling machine.
a) Type : Reciprocating Plunger type
b) Capacity : 1000 LtR./Hr
c) Drive : suitable HP, 1440 RPM
d) Head : 2.5 Mtr.
e) Mounting : Trolley mounted , MOC ? SS304Q
The above pump doses metered quantity of cream into the hopper of filling machine which suits filling rate of filling machine. There is control feed back system between Filling machine & pump .
VACUUM PUMP :
Above pump is suitable HP & capacity depending on the capacity of the ointment plant vessel . watering / oilring type with silencer & non return valve.
F) STORAGE TANK:
The vessel shall be in SS 316Q having cylindrical conical bottom. The vessel will be provided with 40mm ball valve. Shell portion will be flanged from top & bolted to top dish with gasket in bet-ween. All joints are fusion free argon arc welded & inside mirror finished.
The vessel will be supported by 4 nos. cladded ?C? class 3? pipe and to maintain 450mm ground clearance. Vessel has 50mm inlet nozzle for finished product entry & vent.
G) WORKING PLATFORM :
This platform will cover both tanks & with AL dimpled plate and SS counter sunk screw. SS 304 Q railing on either side. There is provision of steps on either side.
T130X reinforced ultrafine mill is a new facility designed by GME expert basing on statistical analysis and a large number of suggestions from users and the innovative design of the super pressure trapezoidal mill. It has superseded and optimized in the structural characteristics of trapezoidal MTM mill, and it also forms its own unique characteristics.
FEATURES:
Adopt flexible connection between the mainframe and the classifier, avoiding too much vibrating
Using Germany Flender reducer ensure that it has reliable performance.
Classifier applies high-density blade and it is easy to adjust the by equipping frequency control system.
Applying dust bypass collector, it won't bring environment pollution.
Optimized design make powder centralized collection and packing become easy.
APPLICATION:
T130X reinforced ultrafine mill is mainly used in processing materials of metallurgy, building construction, chemicals and mining industry, such as feldspar, calcite, talc, barite, fluorite earth, ceramic , bauxite, phosphate rock, iron oxide, slag, clinker, chemical fertilizers, compound fertilizers, fly ash, coal, coke, lignite, gypsum, graphite, etc.
Product Description: We are offering Pre Treatment Plants, which are vital element of any finishing system. We are involved in designing and manufacturing of all types of plants ranging from basic immersion through to tunnel type spray cleaning systems. These can be fabricated using mild steel and/or stainless steel. We are completely assisted with a proficient team which excels in providing customized solutions. Our entire assortment of metal pretreatment includes the following: Dip (immersion) & spray (tunnel type) cleaning/chemical pre-treatment plants Any size Pretreatment tanks or any type & shape of components Material handling through baskets & hoist, cranes and transporters Hot water generators for pt line / plating line Hot air drying oven These have been widely acknowledged for the following features: Reduced water usage Reduced chemical cost Lower energy consumption Improved salt spray results Extends bath life Eliminate steps in your pretreatment process
Name: Plastic Dewatering/Washing Machine
Brand Name:HYNAAR
Type: Recycling Granulator
Material:PP/PE, PE,PP,PET
Application:Plastic dewatering machine
Automatic Grade:Semi-automatic
Production Capacity (kg/h):300-1000
Voltage:380V
Power (kW):7.5
Material:SUS304 Stainless Steel
Certification: CE ISO
Applicable Industries: Manufacturing Plant
Description
SL Series
GSL Series
Plastic dewatering machine
The plastic recycle dryer machine is for the plastic washing recycle line, the plastic recycle is crush, wash, dry and collection. this machine is to make the wet washed plastic falkes or films dry.the dirty water and the addition dust and oil is remove after this machine, the material that there will be dry and easy to do the storage and the use for the different way.
Introduction of Plastic Pellet/Flakes Drying Machine
1. This machine is mainly used to dewater granular / flake plastic material by high speed rotating blades.
2. Wholly made of stainless steel, durable, long life, easy to clean.
3. Stable operation with low noise and high working efficiency.
4. Automatic feed in and feed out functions, simple operation.
5. Used for recycling plastic flakes/pellets/chips,chopped scrap dewater;
Features:
The machine consists of the following main parts: spindle, spindle motor, discharge port, rotor blade, inner stainless steel screen, outer cover, electric box, feed hopper, feeding motor, reduction box, feed screw.
1. The eighth generation plastic pellet dewatering machine uses the advanced vertical dewatering machine structure, which is highly efficient in dewatering, saves electricity, and is more convenient for sewage recovery;
2. The internal blades of the dewatering machine are all simulated by computer. The blade distribution and angle are scientific and reasonable, the cutting force is high, and the contact with the material is small. It can ensure the smoothness and integrity of the material, and it will not cause damage or loss to the plastic particles. The limit improves the working efficiency of the dehydrator;
3. The main shaft adopts a solid imported alloy steel column, which is never deformed, wear-resistant, acid and alkali resistant;
4. The left and right side doors adopt double-slot base, no sewage overflows to ensure the workshop is clean and convenient for mechanical sewage recovery;
5. The appearance of the whole machine is fresh and beautiful, the floor space is small, and the base is self-contained, which is convenient for forklift handling and installation.
Note:
1.The capacity results we tested is proceeded by hard PVC flakes and final moisture is around 0.8%.
2.Capacity results varies from different materials.
10064 Industrial Machinery Plants Suppliers
Short on time? Let Industrial Machinery Plants sellers contact you.
Plastic Granules Flakes Powder Mixer :
The color mixing machine is a machine that uses the vortex type high-speed operation of the plucking blade to make the plastic granules (or resin powder) tumbling and colliding with friction and heating, so that the materials are mixed and the water is quickly evaporated from the exhaust pipe to achieve the purpose of drying.
The Vertical Colour Mixer is suitable for mixing and color mixture of various kinds of plastic raw materials with granular solid state and the color master batch.
Plastic Color Mixer Process:
The vertical stirrer is able to perform even mixture for a large volume of materials in short mixing time by utilizing the rotation of the paddles to gather the material from the bottom of dump center to the top, shed the material flow back to the bottom and complete the mixing function in short period of time
Color Mixer Features:
Barrel is made of imported stainless steel, the welding is durable, the surface is smooth and the cleaning is convenient
Strong mixing, a short time to complete the uniform mix, low energy consumption, high efficiency
Cycloid reducer motor, low noise, durable
Fully sealed design, work without dust pollution
Timer can be selected for mixing time 0 to 30 minutes
Barrel lid, barrel bottom stamping molding, with precision, more durable
WORKING PRINCIPLE
With the rapidly rotating screw to raw material from the bottom of the barrel from the center to the top, and then to gather the scattered, back to the bottom, so that the material in the barrel roll up and down within a short period of time can be a large amount of raw materials mixed evenly
PRODUCT SUPERIORITY
Vertical mixer, horizontal mixer, plastic mixer, color mixer machine, color mixing machine, color mixing machine, vertical feed mixer, dry mixer machine, PVC mixer, mixer with heater, PVC mixer machine, volumetric doser, mixer machine industrial, pellet mixer, masterbatch doser, granule mixer, plastic color mixer, vertical mixer machine
1. Small size, easy to move;
2. It is equipped with cycloidal pinwheel gear motor, which is low in noise and durable.
3. Complete uniform mixing in a short time, low energy consumption and high efficiency;
4. The barrel lid and the bottom of the barrel are stamped and formed, which is accurate and more durable;
5. The timer can select the mixing time between 0-30 minute
Industrial Mixer Machine
Big Vertical Color Mixer, Plastic Material Mixer, Industrial Mixer Machine With Heater
The helical circular mixture, fast and evenly stirring
Suitable for all kinds of plastic raw materials and color powder or granules
Fully stainless steel contacting parts, rust-free and easy to clean
Installed with the power control device to ensure safety
Customizable for drying type model
Vertical Plastic Color Mixer
Name: Plastic Mixer Machine, Plastic Color Mixer
Model : JB500L JB1000L JB2000L JB3000L JB4000L JB5000L
Function : With Heating / Without Heating
Application: Plastic Mixer
Automatic Grade: Automatic
Brand Name: Hynaar
Voltage:380V/50Hz/3Phase
Certification: CE/ISO9001
Weight (KG):450-3000 KG
Applicable Industries: Manufacturing Plant
Usage: PP PVC PET ABS Plastic Mixer
Material: 304 Stainless Steel
Raw material: Plastic Pellets
Capacity: 500 -5000 Kg/h
Vertical Mixer _Plastic Granules_Flakes_Powder:
The color mixing machine is a machine that uses the vortex type high-speed operation of the plucking blade to make the plastic granules (or resin powder) tumbling and colliding with friction and heating, so that the materials are mixed and the water is quickly evaporated from the exhaust pipe to achieve the purpose of drying.
The Vertical Colour Mixer is suitable for mixing and color mixture of various kinds of plastic raw materials with granular solid state and the color master batch.
Industrial Mixer Machine
â?¢ Big Vertical Color Mixer, Plastic Material Mixer, Industrial Mixer Machine With Heater
â?¢ The helical circular mixture, fast and evenly stirring
â?¢ Suitable for all kinds of plastic raw materials and color powder or granules
Fully stainless steel contacting parts, rust-free and easy to clean
Installed with the power control device to ensure safety
Customizable for drying type model
Plastic Color Mixer Process:
The vertical stirrer is able to perform even mixture for a large volume of materials in short mixing time by utilizing the rotation of the paddles to gather the material from the bottom of dump center to the top, shed the material flow back to the bottom and complete the mixing function in short period of time
Color Mixer Features:
Barrel is made of imported stainless steel, the welding is durable, the surface is smooth and the cleaning is convenient
Strong mixing, a short time to complete the uniform mix, low energy consumption, high efficiency
Cycloid reducer motor, low noise, durable
Fully sealed design, work without dust pollution Timer can be selected for mixing time 0 to 30 minutes
Barrel lid, barrel bottom stamping molding, with precision, more durable
WORKING PRINCIPLE
â?¢ With the rapidly rotating screw to raw material from the bottom of the barrel from the center to the top, and then to gather the scattered, back to the bottom, so that the material in the barrel roll up and down within a short period of time can be a large amount of raw materials mixed evenly
1. Small size, easy to move;
2. It is equipped with cycloidal pinwheel gear motor, which is low in noise and durable.
3. Complete uniform mixing in a short time, low energy consumption and high efficiency;
4. The barrel lid and the bottom of the barrel are stamped and formed, which is accurate and more durable;
5. The timer can select the mixing time between 0-30 minute
Models : G25 G50 G75 G100 G150 G200 G300 G400 G500
Certification: CE SGS ISO9001
Warranty: 6 Months
Applicable Industries: Manufacturing Plant
Type:Hot Air Drying
Capacity:25KG 300KG
Application:Plastic Industrial
Suitable for:Injection Moding Machine
Item:Plastic Granules Pellets Hopper Dryer
Usage:PE PP ABS
Application:
Hopper Dryers mainly applied to plastic material drying. Hot air is used to dry all wet materials which gain an even hot airflow to improve drying efficiency for assuring the quality of products.
Plastic dryer machine are the most efficient and economical means of drying plastic materials and can dry materials that are wet by packaging, shipping or recycling. The hopper is made of stainless steel and has the functions of hot air blowing and whirlwind exhaust and double-layer insulated barrels. It is especially suitable for use with dehumidifiers to dry engineering plastic materials.
Features:
All material contact surfaces are made of stainless steel to avoid material contamination
Precise aluminium casting hopper barrel features smooth surface & good performance on temperature keeping
Silent fan, optional wind filter, to ensure that raw materials from pollution
Hopper barrel is fitted with see-through windows to observe inside material level
Hopper barrel separated from its base for easy cleaning
FEATURES
1. Using the high performance of the uniform dispersion of hot air diffusion device, keep the plastic dry temperature, increase the drying efficiency.
2. The unique hot air duct design, can avoid powder accumulation in the bottom of the electric heating pipe, causing combustion.
3. The barrel and internal parts are all made of stainless steel.
4. Barrel and bottom of separation, easy to clean material, refueling quickly.
5. Using the proportional deviation indicator temperature controller, can accurately control the temperature.
6. There is a double overheating protection device, can reduce the man-made or mechanical failure caused by the accident.
7. A variety of models can provide pre heating timing device, microcomputer control, and double layer insulation material barrel selection.
8. All digital LED control P.I.D status display.
9. 0-99 hours automatically boot time.
10. Provide intermittent drying mode, in order to achieve the purpose of saving electricity. (SHD-DT only with 8-10 Series)
11. Transparent window type magnet base.
Since 2005, Habricus Group is one of the biggest Exporters and suppliers of Lathe Machines, Milling Machines, Power Press, Hydraulic Press, Hand Press as per specifications required by customer.
SVSST-Steam Shrink Tunnel is employed for shrink sleeve label and tamper evident band application for a middle, full body and cap shrink applications. SVSST is designed and manufactured to consistently take on the most difficult shrink labeling operations while keeping energy costs low. The High quality & advance technology steam system provides the different steam zones with steam energy. This can be manually controlled through the regulating valve. This enables and even shrinking of the sleeve onto the product. Multiple steam zones and adjustable tier manifold direct steam heat were needed to produce a precise, high-quality finish appearance of PVC, PETG, OPS, and PLA labels and neck bands. Tunnel steam zones can be independent to ensure a quality finish regardless of container shape of size.
Silent Features:
New cantilevered design: Standard height adjustable, cantilevered frame for long lasting operation and added flexibility.
Maintenance friendly Side panels on both sides give easy accessibility to the inside of the tunnel.
Modular: Available in 3-6-zone configurations.
Simplified steam manifold and independently adjust and control steam flow.
Flexibility: Four axis adjustments allow for high quality shrinks on a wide variety of container shapes and sizes.
Easy changeover: Only Allen wrenches required.
Excess steam exhaust: Air blower with adjustable steam exhaust window.
Optional Features:
Digital temperature indicator.
Steam generator.
Minimum Order Quantity 1 Unit
Condition New
Driven Type Electric
Frequency (Hertz) 50
Machine Capacity 60-1000 bottles/min
Machine Type Automatic
Material Stainless Steel
Phase Single Phase
Power Consumption 1-2 HP
Voltage 220 V
We offer a wide range of quality and durable range of Automatic Bottle Filling Machine.
Product Details:
Minimum Order Quantity 1 Unit
Material Mild Steel
Model SVHBU
Air Supply 5-6 Bar Regulated Air Supply
Phase 1
Voltage 230 V
Frequency 50 Hz
Automation Grade Automatic
Direction of Movement Left to Right
Output Up to 300 Bottles
Automatic Bottle Unscrambler is designed to provide a loading solution for empty containers and delivers them to the downstream equipment conveyor in vertical condition lines in a controlled and repeatable manner. This model operates with great simplicity, efficiency, and minimal maintenance. They are suitable for large variety of bottle shapes and sizes in a wide range of industries. No longer are employees required to manually sort bottles and stand them upright on a conveyor or feed table an otherwise tedious and time consuming task. Changeovers from one size bottle to another are as very easy and minimum time consuming. SVHBU provides bottlers with increased efficiency, labour savings and productivity by achieving speeds up to 300 BPM. It can work for any shape like round, oval, square, etc.
Silent Features:
SS 304 anodizing aluminum construction.
Smooth in feeding for existing packaging line.
Totally enclosed machine.
Automatically correct inverted bottles.
Easy to operate and vibration free.
Ensure no inverted bottles go to the next machine.
Running with high efficiency, no need workers watching.
Simple in structure.
Easy to clean and maintain.
Optional Features:
Low-level alarm in the storage of container.
Elevator speed control sensor.
Acrylic or Polycarbonate enclosure in a frame.
Online ionized air cleaning.
Accumulation conveyor turntable of unscrambled containers.
Container counting.
Online container testing by leak test, weight test, etc.
Online labeling.
Product Details:
Minimum Order Quantity 1 Unit
Brand Siddhivinayak Automation
Capacity 6-8 Pack per minute
Material Stainless Steel
Usage Industrial
Voltage 220 V
We are offering Shrink Wrapping Machine to our client.
Product Details:
Minimum Order Quantity 1 Unit
Automatic Grade Automatic
Driven Type Electric
Material Mild Steel
Voltage 220V-240V
Phase 2
Frequency 50 Hz
We are a unique entity in the industry, actively committed towards providing an optimum quality Induction Cap Sealing Machine.
SVSSA 100/200/300 is designed to insert sleeve with the desired position on various size and shape of containers. this unique model is suitable for the variety of industries with an opportunity to reduce labor and increase manufacturing rates. The machine having integrating functions of delivering & classifying containers, accurate cutting of label sleeving and proper positioning sleeve on a bottle. SVSSA 100/200/300 is constructed of sturdy welded steel frame completely enclose in S. S. sheet doors and aluminum alloy.
The unit consisting of sleeve roll loader-carrier assembly, Conveyor bottle separating assembly, Center pillar, Bottle positioning mechanism, Cutter mechanism, Optical scanner, Controlling assembly and Brush assembly etc. This model operates with great simplicity, high efficiency and minimal maintenance with production capacity up to 300 BPM.
Silent Features:
Rigid Structure constructed SS and anodizing aluminum alloy.
The fully automatic machine with speed up to 300 BPM.
No bottle no sleeve.
Statics Charges elimination system for accurate sleeve placement.
Totally PLC Control system.
No Tools required for changeovers from one size bottle to another.
The servo-based high speed with accurate length sleeve feeding and rotary sleeve cutter system.
Online speed can vary & fully synchronized with all mechanism.
Suitable for a various shape of Glass, Plastic, Pet, Tin, Corrugated Containers.
Optional Features:
Sleeve Labe Roll Empty: Machine stop with Alarm.
Missing sleeve label: Machine stop with alarm or online
pneumatic operated product rejection system.
Tower light: Indicate the status of a process.
Online Printer.
