A cubical shell furnace, which will be stationary furnace, used in melting all kinds of non-ferrous melting, lead oxide kettle, zinc kettle etc., indirect type melting ensures the loss of metals due to oxidation/carbon deposit by the fuel or combustion properties. Furnace is lined with refractory and insulation brick to hold the liquid metal to a temperature of 1200 deg.C. This furnace lining by a brick is formed with extra locks mechanically to ensure the lining the tightness and holds the crucible to not to fall of while tilting the furnace. Our specialties are manual operating furnace, automatic operating furnace, air/fuel ratio regulating system, mass flow control system, pressure balancing system, flue control system.
Atec Tilting Furnace is a Cubical Shell Furnace, which tilts by the Hydraulic/Motorized/Geared mechanism for pouring out the metal directly on the mould/Ladle for heavy Castings. Indirect type melting ensures the Loss of metals due to oxidation/Carbon deposit by the fuel or Combustion Properties. Furnace is lined with Refractory and Insulation brick to hold the liquid metal to a Temperature of 1200oC. This furnace lining by a brick is formed with extra locks mechanically to ensure the lining the tightness and holds the crucible to not to fall of while tilting the furnace.Our furnaces are designed for skin temperature of 65C (Maximum).
A burner made with CI body, has a Primary and Secondary air ports, supplied wit Air Butterfly valves, Burner block, Precise control oil Valve (SOV) as a Package. Burner is used in the applications, where Fuel will be Diesel, LPG, Natural Gas, Producer gas etc., This burner is specially designed to avoid localized Heating. It is designed to give 100% Combustion efficiency even with High carbon oil. Advantages : Fuel Efficient by Better atomization Uniform heat transfer, 10% savings will be possible by interchanging with any make burner. Optional Accessories : Preheated combustion air upto temperature of 350?C (Max) for fuel saving upto 40%.
A cubical shell drier, which is a customized design based on the applications, temperature requirement for these applications vary from 100C to 300C. Driers are also designed with Direct and Indirect type Driers. Drier is lined with Refractory and Insulation brick/ Glass wool insulations to hold the Temperature up to 600 C. Driers will have two chambers in case of indirect type drier. The chambers are firing and Heating Chambers. If in case of Direct type drier, the re circulation fan must be used for the forced heat transfer. Advantages : Our Furnaces are designed in such a way to reduce the Fuel Consumption. Our furnaces are lined with both refractory bricks and Ceramic fibre modules, in such a way to pass the flue Gas around the material to be heated, enabling high conduction convection and Radiation heat transfer. Combustion/Heating Equipments are designed to meet the requirements of furnace and Heat transfer rate. Burner will be positioned inclined to an angle, so that the flame/flue skips on the surface of the material. Better heat transfer rate through circulation and Re-circulation. Our furnaces are designed for skin temperature of 65C (Maximum). Optional accessories : Pre heating the scrap before charging can be done. Recuperator to pass the combustion air into the burner at a temperature of 150C (minimum) for fuel saving upto 40%.
Monoblock burner for all types of heating application like boiler, oven, hot air generator, dryer, furnace, melting furnace, heat treatment. Standard.
Industrial burners
1. Loading capacity - 400 kg to 1200 kg gross 2. Heating - electric heater type/ gas type 3. Quenching - oil quenching or molten salt 4. Atmosphere - nitrogen methanol, endo gas As per the equipment
1. Capacity - fromm 100 kg/batch to 2000kg/batch 2. Media - steel shots ( cast or cut wire) 3. Dust collector- standard cloth bag or cassete type 4. M/c type - thumb blast, table type, t- rail type, hanger type, cont. Blast type etc. Depend on machine size, export quality wood packing
Hollow silver statue and indian god, elephant, and ather animalls in light weight silver electro formed well in finishing.All articals r 92.5silver, 999silver, avelable on request. Standared plastic paking.
Ground granulated blast furnace slag 1. Fineness (m2 /kg): 370. 2. Soundness le-chatelier expansion (mm) : nil. 3. Initial setting time (min) Not less than opc:220. 4. Insoluble residue(%):0.05 5. Magnesia content (%):9.5 6.Sulphide sulphar(%):0.60 7. Sulphite content (%):0.10 8. Loss on ignition (%):0.30 9. Manganese content (%):0.06 10. Chloride content(%):0.003 11. Moisture content(%):0.005 12. Glass content(%):94 13. Compressive strength (n/mm2): After 7 days34.0 After 28 days53.0 14. Chemical moduli A). Cao + mgo + sio2 :84.0 B). Cao + mgo /sio2 :1.30 C). Cao/sio2 :1.05. Tonnes packed in i tonne or i.5 jumbo bags.
1. Fineness (m2 /kg): 370. 2. Soundness le-chatelier expansion (mm): nil. 3. Initial setting time (min) Not less than opc:220. 4. Insoluble residue(%):0.05 5. Magnesia content (%):9.5 6.Sulphide sulphar(%):0.60 7. Sulphite content (%):0.10 8. Loss on ignition (%):0.309. Manganese content (%):0.06 10. Chloride content(%):0.003 11. Moisture content(%):0.005 12. Glass content(%):94 13. Compressive strength (n/mm2): After 7 days34.0 After 28 days53.0 14. Chemical moduli A). Cao + mgo + sio2 :84.0 B). Cao + mgo /sio2 :1.30 C). Cao/sio2 :1.05. Tonnes( 1 tnnes and 1.5 tones in jumbo bags).
We manufacture kiln from 750 deg to 1650deg for ceramic and refractory industries. We also design driers recuperators chimney. Burners and combustion systems. 0.5 cu.M to 50 cu.M.
Syndanio - 350 High strength machinable, thermal & electrical insulation material Withstands 350C temperature .
Induction heating machine For hardening, annealing, brazing For pcs
Rubber roller Company imports & distributors rice dehusking rubber rollers Carton packing
Dew needle rollers Specifications Loose needle rollers Dimensions Outside diameter , mm (in) Overall length , mm (in) 1.5 to 25 mm 1.5 to 100 mm Materials Standard Alternative Sae 52100 bearing quality chrome steel Available on request Hardness Standard Alternative Hrc 60 to 64 Hrc 45 available on request Surface finish Standard , mm (in) Alternative Od ground and lapped to surface finish of 0.2 microns ra maximum Surface finish as low as 0.050 microns ra Available on request Tolerance Out side diameter , mm (in) Standard Alternatives Outside diameter , mm (in) Standard Alternatives +0.000-0.005 (+0.000-0.002) g5 +0.000-0.003 (+0.00000-0.000120) g3 +0.000-0.002 (+0.00000-0.0000.80) g2 +0.000-0.500 (+0.000 -0.020) +0.00-0.300 (+0.000- 0.012) +0.00-0.250 (+0.000 û 0.010) +0.00-0.100 (+0.000-0.004) Note : closer tolerance length rollers available Primarily in end ground configurations . Outside diameter , mm (in):1.5 to 25 mm Overall length , mm (in): 1.5 to 100 mm
Hot air oven Ramcolab hotairoven made from inner ss, outer ms with powder coating finish. Temp control for digital temprature indicator cum controller. Temp range : up to 250 deg c accuracy : + - 1 deg c Size : 14 x 14 x 14" Size : 16 x 16 x 16" Weight : 25 kg
Tubular heaters 1. Laboratory ovens 2. Highdensity catridge heaters 3. All types of industrial heaters 4. Industrial ovens& furnaces 5. Thermocouple & temp-controllers 6.Thyristor power packs 7.Solid state relays (ssr) 8. Hot air dryers Wooden casing 1500mmx300mm
Hot air blowers Our hot air blowers are energy efficient and we regularly improvise on the designs to improve the performance and reduce the costing.The unit is an assembly of air source supplied by a continueous rated blower motor combination and a rigidly held wire wound ceramic honey comb electrical resistance heater and lastly a temperature control device operating on the input voltage regulation.The system is very adaptable to many applications in the industry.Heater ratings can be supplied from 200 watts to 2000 wattsand is designed for 230 volts max(+ 10 %).The main body can be made made out of ms, ss304 , brass as per the end users needs. Easy to assemble packing in thermocol and heavy corrugated board box containing not more than 2 sets weighing about 13.5 kg gross.
Portable infrared (IR) heating system Portable IR heating systems and Trolleys for touch up paint curing and drying Portable system is modular with numerous designs of modules and IR lamp attachments Power output: 6 KW and higher A standard product for our OEM Customers: Mercedes-Benz, Ford, Toyota, Hyundai, Skoda and many more.Ideal for Auto body workshops & garages
