Gleam Light India renowned manufacturer of the best quality CDMA Rubber Duck Antenna, We are Manufacturing also customized CDMA Antenna that is used for RF Communication & WIFI,
CDMA Rubber Duck Antenna Designed to work with highest efficiency not only at CDMA Frequency but also at the 4G/ 2G/3G 850/900/1700/1800/1900/2100 bands. This wide-band antenna functions equally well for GSM, EDGE, GPRS, CDMA, UMTS, HSPA.
Provide an introduction to ceramic chip capacitors
Objectives:
Describe the manufacturing process and basic structure of ceramic capacitors
Explain the material systems and basic specifications of ceramic capacitors
Describe some of the characteristics of ceramic chip capacitors
A capacitor is an electrical device that stores energy in the electric field between a pair of closely spaced plates
Capacitors are used as energy-storage devices, and can also be used to differentiate between high frequency and low-frequency signals. This makes them useful in electronic filters
Capacitance Value: Measure of how much charge a capacitor can store at a certain voltage.
Residential Diaphragm Gas Meter
ITRON (MID approved)
Steel Version
Basic Features
3 Compact size: 1.2 dm cyclic volume
Range: G1.6, G2.5, G4
EN 1359 & O.I.M.L compliance
Design
Long -term accuracy & safety
Ready for remote reading & data management
Quality
World-class, ISO9001 certified, European Engineering and
Manufacturing
APPLICATION
The ITRON, with an installed base of over 30 million units, is a
versatile meter that makes it the preferred choice of many large
utilities world-wide.
METROLOGY
The ITRON meets O.I.M.L, EN 1359 and MID (certificate delivered by
the LNE), and more than 25 national metrological standards
(DVGW,NMI Class 1....).
Its design and the careful choice of materials enable the ITRON to
meet the highest demand in international markets in terms of
accuracy and long-term stability.
During the preliminary test controls on the sonic nozzle test benches,
all meters are tested at Qmin, 0.2 Qmax and Qmax.
OPERATING PRINCIPLE
The ITRON is a positive displacement diaphragm gas meter with a
stand-alone twin chamber measuring unit.
The twin chambers are each fitted with a flexible and gas-tight
diaphragm which is moved by the differential between the inlet and
outlet pressure. The Gas enters one side of the diaphragm pan while
on the other side it comes out through a separate port on the valve.
When one side is full, the rotating mono-valve moves on to the next
position, allowing the gas to fill the empty side. A transmission gear
and a mechanical coupling or stuffing box transfer the reciprocating
motion to the mechanical retrofitable index. The measuring unit is
housed in a robust gas-tight casing.
CONSTRUCTION
With its casing in steel, high protection against corrosion is ensured
by 500 hours salt fog spray test resistant cataphoresis treatment. The
aluminum version can withstand up to 1000 hours salt fog spray test.
The extreme strength of the case joint is achieved by rolling the belt &
compressing the flanges into contact with a sealant applied between
the faces. This forms a joint which is both gas-tight and fire- resistant.
MEASURING UNIT
The achievement of the fixed stroke mechanism is the result of
precision and high quality automation, and eliminates the need for an
adjustable tangent. This confines all registration adjustments to the
accessible change wheels behind the index.
The long life synthetic diaphragms, coupled to the well-proven
movement design, combine to give excellent stability and accuracy
during the whole life of the metre.
All materials have been selected for their superior resistance to
chemicals and gas. The valve and the grid, thanks to a special
Bakelite formulation, enjoy high gliding properties and are protected
against premature wear.
Finally, a back-run stop prevents the metre from running backwards
in case of tampering.
INDEX
The metres are available with metric or cubic inch indexes. They
come with a permanent magnet for pulse generation and can be
retrofitted with a pulse transmitter. Ip54 and Ip67 versions are
available for specific environments.
QUALITY ASSURANCE
Quality assurance procedures- such as ISO 9001- and strict controls
throughout the manufacturing process ensure a very high quality
level.
APPLICATION
The ITRON, with an installed base of over 30 million units, is a
versatile meter that makes it the preferred choice of many large
utilities world-wide.
METROLOGY
The ITRON meets O.I.M.L, EN 1359 and MID (certificate delivered by
the LNE), and more than 25 national metrological standards
(DVGW,NMI Class 1....).
Its design and the careful choice of materials enable the ITRON to
meet the highest demand in international markets in terms of
accuracy and long-term stability.
During the preliminary test controls on the sonic nozzle test benches,
all meters are tested at Qmin, 0.2 Qmax and Qmax.
OPERATING PRINCIPLE
The ITRON is a positive displacement diaphragm gas meter with a
stand-alone twin chamber measuring unit.
The twin chambers are each fitted with a flexible and gas-tight
diaphragm which is moved by the differential between the inlet and
outlet pressure. The Gas enters one side of the diaphragm pan while
on the other side it comes out through a separate port on the valve.
When one side is full, the rotating mono-valve moves on to the next
position, allowing the gas to fill the empty side. A transmission gear
and a mechanical coupling or stuffing box transfer the reciprocating
motion to the mechanical retrofitable index. The measuring unit is
housed in a robust gas-tight casing.
CONSTRUCTION
With its casing in steel, high protection against corrosion is ensured
by 500 hours salt fog spray test resistant cataphoresis treatment. The
aluminum version can withstand up to 1000 hours salt fog spray test.
The extreme strength of the case joint is achieved by rolling the belt &
compressing the flanges into contact with a sealant applied between
the faces. This forms a joint which is both gas-tight and fire- resistant.
MEASURING UNIT
The achievement of the fixed stroke mechanism is the result of
precision and high quality automation, and eliminates the need for an
adjustable tangent. This confines all registration adjustments to the
accessible change wheels behind the index.
The long life synthetic diaphragms, coupled to the well-proven
movement design, combine to give excellent stability and accuracy
during the whole life of the metre.
All materials have been selected for their superior resistance to
chemicals and gas. The valve and the grid, thanks to a special
Bakelite formulation, enjoy high gliding properties and are protected
against premature wear.
Finally, a back-run stop prevents the metre from running backwards
in case of tampering.
INDEX
The metres are available with metric or cubic inch indexes. They
come with a permanent magnet for pulse generation and can be
retrofitted with a pulse transmitter. Ip54 and Ip67 versions are
available for specific environments.
QUALITY ASSURANCE
Quality assurance procedures- such as ISO 9001- and strict controls
throughout the manufacturing process ensure a very high quality
level.
Description : offering thyristor trigger pulse isolation transformer. Small size, pcb
Mountable for coupling a trigger pulse generator to thyristor triac
Isolation of small signals from power circuits. Epoxy molded. 4502-1:1
2502-1:1 4503-1:1:1 2503-1:1:1 4504-1:1:1:1 2504-1:1:1:1 4506-2:1
2506-2:1 4507-2:1:1 2507-2:1:1 miniature pulse transformer 4502-1:1
2502-1:1 4503-1:1:1 2503-1:1:1 we also manufacture transformer used in
Mobile chargers we also make transformer as per customers requirements
If detailed information is provided.
23mm diameter, 18mm height excluding lead height
32541 Electronics Communications Suppliers
Short on time? Let Electronics Communications sellers contact you.
S64A101-D6 is a vertically polarized broadband dipole blade antenna operating in the frequency band of 20-1200 MHz. and suitable for DF, Navigation & Reconnaissance applications on UAV.
Light sensitive switch is a device that is used for automatically switching on and off the street lights garden lighting, passage lighting and doorway lighting etc in accordance with the natural lighting level.
The lights connected to the light sensitive switch are turned on automatically in evening when the natural light falls below 15 lux. And lights are switched off in the morning automatically when the light level reaches above 20 lux.
Eliminates the need of human operation for switching on and off any external light connected with this system.
Saves energy saves electricity , no need to manually switching on and off the light, easy to install and durable.
Applications: roadway lighting , building perimeter lighting , outdoor advertising signs , parking lot lighting, garden lighting passage lighting and doorway lighting etc.
An Electronic Ballast is a device/instrument used to control the amount of current in on electric circuit, Also referred as a control gear, an electronic. If generates high frequency alternative goes about more then 25Khz. High freq. allows to lower the system rating without reducing the luminous flux of the lamps. Also available series of <10%THD. High Quality Electronic Ballast Manufacturer and Exporters provides full range of T-8 Ballast.
An Electronic Ballast (Sometimes called control gear) is a device intends to limit the amount of current in an Electronic circuit. An Electronic lamp ballast uses solid state electronic circuitry to provide the proper starting and operating electrical Condition to power fluorescent lamps (FTL).An Electronics ballast dissipates some heal around 90%. GRE’s industrial ballast series heaving special features like EMI/RFI filters, spike protections, high power factors etc. Also available ballast series of <10%THD. High Quality Electronic Ballast Manufacturer and Suppliers provides full range of T-8 Ballast.
ARN-TS2D is a MEMS based single/dual axis inclinometer module that boasts a low price tag. It is most appropriate for mechanical industry, transportation, heavy vehicle, construction and survey applications. This device returns highly accurate angular data in static conditions and can be a part of lab instrumentation, platform stabilization equipment and oem alignment measuring instruments. Single axis module returns roll and dual axis returns roll and pitch information.
1. Measurement range: 60deg (Pitch), 180deg (Roll)
2. Accuracy in static conditions: 0.1 degrees
3. Size: < 78 mm x 56 mm x 36 mm
4. Weight: < 200 grams.
5. Output rate: 1 to 50 hz configurable
6. Power supply: - +8 to +12 vdc
7. Interface: RS232, RS485 serial digital.
Output: Analogue or digital
Typical Linearity: 2.5% (absolute) 1.0% (independent linearity)
Typical Travel: 15mm electrical* / 18mm mechanical*
(*application dependent, adaptable to larger or smaller travel requirements)
Nominal Index Voltage : Programmable
Electrical Limit Maximum : 20 VDC
Supply Voltage : 4.5 - 5.5 VDC
Typical Current Draw : 12 mA (dependent on program conditions)
Maximum Response Time : 600 S
Durability :
Typical Vibration: 200 hrs.; 3 planes; 20 - 2000 Hz; 40G RMS;-40C -160C.
Typical Thermal Shock: 500 cycles, -40C and 160C; 15 sec. transition;
30 min. soak at each temperature
Typical Temperature Range: -40C > 160C
1 switching capability 10 w (max)
2 switching voltage 100 vdc (max)
3 switching current 0.5 amps (max)
4 contact resistance 1 ohms max
5 dielectric :
between terminals 200vdc for 1minute
between body & terminal 500vdc for 1minute
body & cable insulation 500vdc for 1minute
6 must operating distance 7- 14 mm with tvsc magnet tvsc-mfax-01
7 must release distance 10-25 mm with tvsc magnet tvsc-mfax-01
8 operating temperature 80 deg c max
9 surface temperature 5 deg c max @ ambient
10 ambient temperature -20 to +50 deg c
x denotes for high temperature (50 deg c )
11 IP rating ip 67.
12 sensor dimension 35x19x10 mm
13 Cable 2 core cable with shield
14 Approvals : CE & Atex.
