Salient Features:-
High power white light LED source. High light efficient, long life span.You don’t need to maintain it in long term.
Constant current, start-up quickly, low energy consumption. Power consumption is just 20-30%of the same luminous flux incandescent lamp.
Long life-span(40,000 hours, 2 years warranty time), high brightness and optional colours.
Cold White/ Warm White / Red / Blue / Green Colors Available
The housing use high decay resistance material, waterproof, anticorrosive,substantial and durable. This light is good heat dispersion, insure the light has a long life span.
The light match with screw and bracket, installing and connecting the wire is very simple and convenient.
Application:
Widely used in lighting for Square, High building wall ADs, Tunnels, Hotel, Bar, House, Wall.
Which can give the house good colour and make the environment more beautiful and bright.
Salient Features:-
- The light source adopt high power LEDs Integrated, highly-efficient, energy saving and eco-friendly
- Low power consumption with more than 40000 hours lifespan
- Pure aluminium material, wide-angle radiation with uniform illuminance without glare.
- Unique thermal design, ensure the LED with low light dissipation, long lifespan
Salient Features:-
1. Build-in Driver with 5-7 years lifetime( New technology ) Build-in Driver with unique technology ,lasting 5-7 years,so our LED Bulb lifespan can reach50000 hours, and according to 12 hours working per 1 day, it can be constantly used for more than 5-year. But the traditional can not exceed 6000 hours.
2. Warranty Policy : 3 years warranty with original written warranty , 20,000 switch cycles(on/off switching)
3. 36 degree PMMA lens with light transmission rate at 92% .
4 .Low lighting dissipation/sink The light source is the low lighting dissipation and high-bright LED, which the dissipation is less than 30% during 50000hours.
5. High-brightness Adopt high power integrated chip.
6.Environment protection. While working, no ultraviolet light and infrared light radiation. And never contain any hazardous substance, such as Mercury.
7. Eyes protection Diffused cover ,never see LED ,good for eyes; adopting constant current power supply, no flashing, no harm for eyes.
8. Anti-vibration Anti-vibration, not easy to be broken.
Application:
1. Office building lighting
2. Hotel lighting
3. Meeting room
4. Retail shopping store
5. Showroom
6. Other illumination and decoration at home and public area.
Hi-power smd modules available in four lamps, three lamps, two lamps and one lamp modules.
The modules are available in white, warmwhite, red, green, blue, yellow and RGB.
* Consists of a base board, complete with terminals, a set of metal connection pillars and a number of clips on flexible connection strips and accessory units, enabling a wide variety of electrical circuits to be constructed quickly and easily. The phosphor-bronze strips are so designed that when flexed a little in the fingers, they are easily slipped over the pass where their natural spring holds them firmly in position and ensures a good electrical contact.
* The following components are supplied with each board. 20 Flash lamp bulbs, 1.25V, 0.25A, 9 Connectors with lamp holder, 12 Plain connectors. 1 Connector with rheostat, 1 Rectifier, 1 Resistor, 2 Flexible leads with 4mm plug and crocodile clip, 2 Flexible leads with crocodile clips, 2 Crocodile clips, 2 Mounted bell pushes, 2 Soft iron nails, 50mm Square head, 1 Length bare copper wire 20 swg, 1 Length bare Eureka wire 34 swg, 1 Length plastic covered copper wire 26 swg, 1 Plastic disc, drilled, 1 Pencil leads, 1 Piece copper foil, 1 piece steel wool. The standard pack is one complete set as detailed above, sufficient for two students.
Number : JJ-691.1 " Water Circuit Board "
* Consists of a base board, complete with terminals a set of a metal connection pillars and a number of clips on of metal connection strips and accessories units, enabling a wide variety of electrical circuits to be constructed quickly and easily. The phosphor û bronze strips are so designed that when flexed a little in the fingers, they are easily slipped over the pass where their natural spring holds them firmly in position and ensures a good electrical contact.
The following components are supplied with each board. 20 Flash Lamps Bulbs,1.25 V, 0.25A, 9 Connectors with lamp holder, 12 Plain connectors. 1Connector rheostat, 1Rectifier, 1Resistor, 2Flexible leads with crocodile clips, 2 Crocodile clips, 2 mounted bell pushes, 2soft iron nails, 50mm Square head, 1length bare copper wire 20swg, 1 length bare eureka wire 34 swg, 1 Length plastic covered copper wire.
* The standard pack is one complete set of detailed above, sufficient for two students.
Softwareshouse smart pic programmer
Smart pic programmer is very cost effective and can be used for programming a wide range of pic variants.Comes in two models. Student model and industry model.
1 this remote control system can be used in any house, office, restaurants, shops, conference & seminar halls, and hospitals etc. For controlling on/off of lights and fan from a distance of up-to 50 feet / 15 mts.
2 using this remote one can control the on/off operation of 5 lights and 1 fan. Even fan speed can be increased or decreased in 10 steps.
Advantages
1 system saves unnecessary wiring and switches cost of 2 way switching.
2 spark less and contact less switching increases switches life.
3 prevents children from risk of electric shock and short circuit.
4 it is a boon for physically handicapped persons.
5 can be installed in all hospital rooms used for bed-ridden patients.
6 all bed rooms used by elderly and aged people
Features:
1 remote operating distance up to 50 ft / 15 mts.
2 fan speed can also be controlled using the same remote.
3 provision for switching on/off all lights & fan instantly.
4 spark less switching increases switches life.
5 prevents us from risk of electrical shock and short circuit.
6 no alteration required while installing our unit.
Three phase elcb with shock guard
Three phase elcb is micro controller based with shock guard phase preventer inbuilt which allows you to set low, high voltage and amp cut off phase wise individually and it conitnuously displays on lcd display all the parameters like consumption of amp individually per phase and voltage received from the source leakage etc.
Printed Circuit Board
We specialise in Manufacturing and Exports of DRILL ENTRY AND BACK UP BOARDS
DRILL ENTRY AND BACK UP BOARDS
WE HAVE THREE TYPES OF DRILL ENTRY AND BACK UP MATERIAL
PHENOLIC LAMINATED SHEETS ,BOTH SIDE GLOSS(BROWN COLOUR)
MELAMINE LAMINATED SHEETS,BOTH SIDE GLOSS(BOTH SIDE WHITE COLOUR)
Wood Core with Melamine Paper both sides. THICKNESS : 2.5MM
THIS IS A GOOD BACK UP MATERIAL.
Features:
Used for PCB drilling
Good surface flatness, good thickness tolerance
Size:
42"X48"
54"X48"
Thickness: 0.5mm, 0.8mm, FOR (ENTRY BOARD)
THICKNESS: 1.2mm,1.5mm,2.0mm,2.5MM (BACK UP BOARD)
ALLUMINUM ENTRY SHEET
FOIL PAPER FOIL LAMINATE
FEATURES
USED FOR PCB DRILLING
THICKNESS AS PER REQUIREMENT
