CONTINUOUS PASSIVE MOTION unit is designed for lower limb. It is based on solid-state circuitry, silent, smooth & powerful servo motor for continuous operation, instant start/stop. APPLICATION Continuous Passive Motion Therapy immediately used after surgery can give several important benefits to patient like maintenance or improvement in the range of motion reduction in pain and discomfort.
Accelerator Sensor Kit
Prices Mentioned above is for base model only
Prices Mentioned above is for base model only
SPECIFICATIONS : SOLAR PANEL : 0.55 W. 17% EFFICIENCY Li-ion BATTERY : 3.7V 1200mAh LED POWER : 0.2 W NIGHT SENSOR :
COTTEN SEED 37500 MT & COTTEN HALL 6000 MT AVILABLE FOR SALE
Linear Hall Sensor AH3507 Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 6 V; Operating temperature range: -40â?? ~ 125 Rail to Rail voltage output, Rated output current : 6 m Variety of package forms and outer packings for your choice; No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety; Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements. AH3507 is a kind of analog signal output Hall IC, the output voltage changes with the changes of magnetic field. The sensor chip has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, Hall-voltage generator, signal amplifier, and other circuit unit etc. Excellent voltage regulator and temperature compensation circuit ensure the sensor stable operates over a wide voltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged by reverse voltage.
Linear Hall Sensor AH3507 Hall Sensor Hall Switch Features Rated working voltage 4.5 V ~ 6 V Operating temperature range: -40â?? ~ 125 Rail to Rail voltage output, Rated output current : 6 mA Variety of package forms and outer packings for your choice No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety Products meet the EU RoHS instruction 2011/65 / EU and REACH regulations 1907/2006 / EU requirements. AH3507 is a kind of analog signal output Hall IC, the output voltage changes with the changes of magnetic field. The sensor chip has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, Hall-voltage generator, signal amplifier, and other circuit unit etc. Excellent voltage regulator and temperature compensation circuit ensure the sensor stable operates over a wide voltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged by reverse voltage.
The coolant temperature sensor consists of a negative temperature coefficient thermistor that is very sensitive to temperature changes. When the engine coolant temperature gradually increased, Thermistor resistance will gradually decline, On the contrary increases, when the engine coolant temperature changes, the output voltage of the sensor also changes accordingly. Engine coolant temperature sensor elongated head contact with the cooling liquid, the temperature of the coolant is detected by the change of the resistance value, and this signal is sent to the ECU,Used to detect the engine coolant temperature. The ECU corrects the fuel injection time and the ignition time after receiving the temperature signal. The normal use of the coolant temperature sensor is -30 ° C to 120 ° C,The corresponding output voltage is 0.3V ~ 4.7V.When the ECU detects an output voltage signal beyond this range,You can determine the sensor circuit failure. Car intake air temperature sensor (IATS) Automotive coolant temperature sensor (CTS) automobile exhaust gas temperature sensor (Ex-haust Air Temperature Sensor, EATS) car was NTC thermistor / temperature sensor Car temperature sensor,Respectively, water temperature sensor,Exhaust | intake air temperature sensor,These types of sensors are thermistors with the same characteristics,The temperature coefficient is negative temperature coefficient.The water temperature sensor is mounted on the engine cooling water passage,Its role is to detect the engine cooling water temperature,The water temperature sensor housing is fully enclosed,Use the change of resistance value to detect water temperature.The signal temperature value generated by the water temperature sensor is input to the ECU,ECU according to the cooling water temperature ignition control,Correction fuel injection amount to real-time control of the engine,To ensure the normal operation of the engine under different conditions. Intake | outlet temperature sensors are installed,Within the housing of the air cleaner box or regulator,The air flow meter or an intake manifold,Used to detect the temperature of the engine inhaled air.As the intake air temperature changes will affect the air density,The hotline, hot film cooling strength and the degree of atomization of the mixture have an impact,Intake air temperature sensor,Provide a signal to correct this effect.
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
Agecho ultrasonic sensors salient features: Agecho ultrasonic sensors are available with output options such as analog current 4-20ma analogue voltage 0-5v on/off signal trigger output for multi-sensor application pulse width serial ttl serial rs 232c. Agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. Agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). Agecho accuracy is 1% of the full scale. Agecho operating voltage 12v dc with reverse polarity protection.(24v dc optional) Agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. Agecho is very easy to install rugged design for use in dusty and humid conditions suitable for outdoor as well as indoor use. Agecho very useful for non-contact distance/level measurement. The distance of the target is measured not just its presence but gives directly 4-20ma serial or pulse width data proportional to the distance of the target. Agecho operating temperature 0 to 65 degree celsius. Agecho temperature compensated measurement for better accuracy (optional). Agecho unaffected by ambient light object color or any other optical characteristic. Works with hard materials like metal sheet plywood or soft materials like cloth and paper rubber etc.
•agecho ultrasonic sensors are available with output options such as analog current 4-20ma, analogue voltage 0-5v, on/off signal, trigger output for multi-sensor application, pulse width , serial ttl , serial rs 232c. •agecho is very useful non-contact type of sensing or presence or counting of object. On/off type signal is also available. •agecho sensing range: 200mm to 1000mm … up to … 6000mm. (19.7feet) (0-200mm is dead band). •agecho accuracy is 1% of the full scale. •agecho operating voltage 12v dc, with reverse polarity protection.(24v dc optional) •agecho is self-calibrated. Microcontroller is present in each sensor. This provides direct distance/depth reading with better calibration and communication with the controller module. •agecho is very easy to install, rugged design for use in dusty and humid conditions, suitable for outdoor as well as indoor use. •agecho very useful for non-contact distance/level measurement. The distance of the target is measured, not just its presence, but gives directly 4-20ma, serial or pulse width data proportional to the distance of the target. •agecho operating temperature 0 to 65 degree celsius. •agecho temperature compensated measurement for better accuracy (optional). •agecho unaffected by ambient light, object color or any other optical characteristic. Works with hard materials like metal sheet, plywood, or soft materials like cloth and paper, rubber etc.
Thermocouples, sensors (temperature).
Categories Infrared Proximity Sensor GroupElectric Sensors Specifications Search from available Specificationsâ?¦ Voltage 220 V Current 12 A Frequency 50/60 Hz Material ABS Plastic Country of OriginPower Source Electric
Portable Gas Detectors can detect VOC, Toxic, Combustible & Oxygen types of gases which are used for personal safety. Portable Gas Detection System will detect the concentration of gases in confined spaces, sewer manholes, wastewater treatment plants, pharmaceutical industries, fertilizer industry, and many other applications with the display of gas concentration on the LCD. Portable Gas Monitors are a must for people entering hazardous areas. These detectors have the feature of secure handling and programming with three keys and power supply with rechargeable batteries. They have a password-protected function menu, plug-in sensor, and built-in audio buzzer. These Portable Gas Detectors also have optional data logging facilities with 50000 records, which are visible in ASCII format while downloading to PC via USB interface.
This "Solar Sensor Wall Light" has an intelligent energy saving mode which charges the solar light under both strong sunlight and dim sunlight. This is best suited for lighting up dark or sensitive areas around the house. This solar light is made of high-quality PVC plastic which makes it durable against sunshine, rain, snow, ice, and wind. This solar light is waterproof and heatproof. These solar light can be placed in your garden, yard, aisle or driveway. This lantern emits a white bright light. It's lightweight and portability makes it perfect for your camping and trekking. The built-in solar panel charges the battery to provide 8-10 hours of light. The solar panel needs only 6-8 hours of charging for a full charge. The installation of this solar light is easy and requires no extra equipment. You just need to screw it to hold it against any surface or wall. This "Solar Sensor Wall Light" is equipped with Day/Light sensor, When there is Sunlight available the solar light will charge itself and when it becomes dark, the solar light turns itself On and provide a bright white light of 20 LED lights. Besides the solar sensor, this solar light has motion sensor inside it which runs on infrared. When you move away from the solar light it will automatically shut down and when you go near to the solar light, it will automatically turn on. SKU YN2092 Weight 150 Grams Height 12 cm Width 5 cm Length 9 cm Watt 5 Watts Material Plastic In Pack 1 Solar Sensor Wall Light
This STM85 microcontroller based control card can be used to switch ON & OFF 17relays via serial communication (RS232 or UART TTL) .It can also read the status of 8-digit inputs .The relay output status & digital input status is continuously sent out as RS232 data string .It operates in 9600BPS,8-N-1 mode .This control card can be controlled via weighing scale PCB or via PC.
Manufacturer:panasonic Product category:board mount motion & position sensors Rohs:rohs compliant compliant Product:motion sensor Sensing distance:5 m Output type:digital Operating supply current:170 ua Package / case:to-5 Maximum operating temperature:+ 60 c Packaging:bulk Supply voltage - max:6 v Supply voltage - min:3 v Brand:panasonic industrial devices Features:white lens Minimum operating temperature:- 20 c Series:ekmc Tradename:papirss
