Thermoplastic vulcanizates(TPV's) are a very special class of TPE prepared by dynamic vulcanization or cross-linking process of PP and EPDM rubber, It builds favourable properties which make it high performance polymer, compressible and heat resistance. TPV seen strong growth in automobile seals, pipe seals, wire & cable jacketing compound and other application where a high heat resistance required. Thermoplastic vulcanizates with excellent properties of heat resistant and breaking strength Properties High temperature resistance Wide range of hardnesses Resistance to chemicals and weathering Low compression set Flex fatigue resistance Lightweight Good colourability Typical Applications Interior and Exterior Automotive parts Wire & Cable Jacketing compound Gaskets Grommet, sockets Building and construction materials Sporting goods Electrical and electronics good Specification Hardness Set(ISO 868) (Shore A-D) 40 A - 55 D Density (g/cm3) 0.93 - 1.1 Compression(Set) Excellent Tensile Set (ISO 527) 3 MPa 10 MPa Tear Set (ISO 34) 20 kg/cm3 - 120 kg/cm3 Elongation Set (ISO 527) (%) 500 1000 Working Temp. Max. (C) 140 Working Temp. Min.(C) -40 Adhesion PP/ABS/HIPS/SAN/PC/NYLON Solvent Resistance Good Motor Oil Resistance Excellent Acid-Base Resistance Excellent UV-Ozone Stability Excellent
Thermoplastic Polyolefin (TPO) elastomers is a combination of PP and another polyolefin that have been modified to provide better ductility and impact resistance, its ease of processing, lightweight nature, and chemical resistance of PP, TPO compounds can be formulated for increase UV weathering & Scratch resistance when needed Properties Good Dimension Stability High Impact Strength Good Heat Aging Properties Low Density Good Chemical Resistance Good Processability Low Cost Extensive Compounding capabilities Good Recyclability Non-hygroscopic, pre-drying is not necessary Coloured grades available Typical Applications Exterior Automotive parts Bumpers, Bumper Pannels & Parts, Air Intake Ducts, Grilles etc.Interior �¢?? Instrument Pannel, Door Pannel, Control Knobs Industrial products- gasket & seal, weather striping etc. Appliance and housewares Products Sporting goods Personal Care goods Wire and cable Flexible cord, welding cable jacket , automotive wire & cable Health care Specification missing -take from website Specification Hardness Set(ISO 868) (Shore A-D) 50 �??-60 D Density (g/cm3) 0.88 1.12 Compression(Set) Very Good Tensile Set (ISO 527) 10 kg/cm3 - 30 kg/cm3 Tear Set (ISO 34) 30 kg/cm3 - 50 kg/cm3 Elongation Set (ISO 527) (%) 400 - 1000 Working Temp. Max. (C) 100 Working Temp. Min.(C) -40 Adhesion PP/ABS/HIPS/SAN/PC/NYLON Solvent Resistance Medium Motor Oil Resistance Medium Acid-Base Resistance Excellent UV-Ozone Stability Excellent Wide hardness range Does not require vulcanisation-quire higher saving on the processing costs Remains flexible at low temperatures High temperature resistance Electrical insulator with very low conductivity Has grades with very low compression set Grades having excellent abrasion resistance Excellent tear resistance 100% recyclable PVC free Resistance to solvents Resistance to oil Resistance to acids bases and detergents Resistance to UV and ozone Resistance to bacterial and fungus growth Has low toxic potential, with many grades conforming with FDA regulations Halogen free flame retardancy (VO-V1-V2) Colored grades available Allows direct colouring during processing by utilizing PP or PE based color 2-shot molding onto wide range of plasics Suitable for co-extrusion process
Thermoplastic elastomers (TPEs) are also known as thermoplastic rubbers. These are a class of copolymers, which are used are plastic and rubber that includes a material with both thermoplastic and elastomeric properties. With the help of compounds as SBS or SEBS it forms Thermoplastic elastomers which are known as TPE, it facilitates to know the general level of performance and asset of the compound Properties grades and transparent grades available Household Appliances Consumable Goods Pleasant Surface Feel (Soft Touch) Adhesion to Polar thermoplastic such as ABS, PC & PP Good Tear strength, abrasion resistance High Flexibility Durability Low compression set Typical Applications Kitchen Utensils Household Articles Soft GripSeals manufacture of shoe sole material shock-absorbing material packing material grips anti-slip pads, rubber and plastic modification Specification Hardness Set(ISO 868) (Shore A-D) 30 A - 50 D Density (g/cm3) 0.88 1.4 Compression(Set) Good Tensile Set (ISO 527) 1.5 MPa 12 MPa Tear Set (ISO 34) 20 kg/cm3 - 60 kg/cm3 Elongation Set (ISO 527) (%) 300 - 1200 Working Temp. Max. (C) 130 Working Temp. Min.(C) -30 Adhesion PP/ABS/HIPS/SAN/PC/NYLON Solvent Resistance Medium Motor Oil Resistance Good Acid-Base Resistance Excellent UV-Ozone Stability Medium
FlexiShine Pollyblends has launched a next-generation technology to create glass-filled PP compounds. We create compounds with unprecedented strength. Glass Filled PP Compound is prepared by compounding Polypropylene Homo-Polymer with a fine grade of glass. The entire process followed as par the industry standard and up to mark of all grades which are suggested by the authorities. Glass-Filled PP Compound manufacturers in India use a special technique to increase the long term thermal-mechanical properties. We use some additives like antioxidants, lubricant, processing aid. It shows good dispersibility and excellent balance of properties in the final product if some compounds are used directly or diluted with desired grades of polypropylenes. FEATURES High strength High chemical resistance High melting point (150 to 200F) Very low density Abrasion resistance Lightweight Low-cost fabrications Machinable Maintenance-free Weldable Wipes clean Dimensional stability Excellent electrical properties Typical Applications Acid Tank/Lineup Battery Cases Tank Covers Etching Machines/Rinse Tubes Machined Parts Fume Hoods Ducts Scrub Stations Metal Plating Barrel
GEOGRIDS STRENGTH : 40/20KN, 60/20KN, 80/30 KN, 100/30 KN,120/30 KN, 150/30 KN, 200/30 KN, 250/30KN, 300/30.
GEOGRIDS STRENGTH : 40/20KN, 60/20KN, 80/30 KN, 100/30 KN,120/30 KN, 150/30 KN, 200/30 KN, 250/30KN, 300/30.
GEOGRIDS STRENGTH : 40/20KN, 60/20KN, 80/30 KN, 100/30 KN,120/30 KN, 150/30 KN, 200/30 KN, 250/30KN, 300/30.
GEOGRIDS STRENGTH : 40/20KN, 60/20KN, 80/30 KN, 100/30 KN,120/30 KN, 150/30 KN, 200/30 KN, 250/30KN, 300/30.
Automotive Compounds Cable & Wire Compounds Footwear Compounds Medical Compounds General Compounds
Product: PET bottleFlakes Process: Hot Washed Moisture: 0.5% Max. PVC content: 0.01-0.03% I.V. : 0.7 0.85 M.P. 255+/- 5C Color Availability: Clear, Green, Blue Flake Size: 12-14mm Foreign Materials: 0.5% max Applications: PSF,PET straps 12 mm to 25 mm
Prhd6 Hdpe granules 6mfi 100% virgin grade 25 kg bags or as per buyers requirment
Plastic
HDPE Raw Materials
LLDPE Raw Material
PP Granules
PP Granules
PVC Granules
Grade HP9450 ( 3 MFI) Good ESCR Grade Price: USD1760/mt, TT in advance, CIF Mundra / Nhava Sheva / Chennai for MOQ 2 fcls per order per shipment
We are Brahmdeep Polymer (Known as BRD Polymer) is An ISO 9001 : 2015, ISO 14001 : 2015 and OHSAS 18001 : 2007 certified company and in this empire we are Manufacturer and Exporter of high-quality Nylon Granule, PC Granule, Glass filled , Plastic Granules and ABS Granules , PPO , PP , etc. https://www.brahmdeeppolymer.in/
We are Brahmdeep Polymer (Known as BRD Polymer) is An ISO 9001 : 2015, ISO 14001 : 2015 and OHSAS 18001 : 2007 certified company and in this empire we are Manufacturer and Exporter of high-quality Nylon Granule, PC Granule, Glass filled , Plastic Granules and ABS Granules , PPO , PP , etc. https://www.brahmdeeppolymer.in/
