We are manufacturing a wide range of air chiller that is widely suitable for its high operational efficiency. Our air chillers are designed to cool both the process as well as the process machine. Using an air chiller to remove heat from the process involves an evaporator to remove the heat and an air cooled condenser to remove the heat from the evaporator. In a typical plant layout, the evaporator and condenser are inside the chiller unit. Features :- High quality components and robust design. Factory built and tested for quality check. User friendly micro-processor based control panel. Chillers are fully automatic with high quality controls. Quick chilling is ensured with plate type and shell and tube evaporators.
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7
PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103
Genuine Bronze, Brass And Copper Utensils .
A-One International square/Round type cooling towers work on the principle of counter flow. This means that the water flows down while the air is pulled upwards by a fan. As the water flows further through the system, the air encounters is fresher, in other words cooler and less saturated with moisture. Direct access to internal parts providing easy maintenance and repairs, which is negligible. All materials in making A-One International cooling tower are completely resistance to corrosion and chemicals. It is light in weight and thus permits roof installation without any special reinforcement. A direct driven axial flow fan ensures the system free from problem faced with belt and gear drives. Features :- Less Noise Occur During Operation Of Cooling Tower Low Energy Consumption . Designed To Give Optimum Cooling Performance. Inbuilt Frap Legs For Casing Increase Life Of Cooling Tower Against Rusting. Frp Louvers Inlets For Eliminates Water Splashing And Easy To Clean Basin Or Resist Against Outer Objects. Our Product is Economical And Approved Induced Draught Design. It works In Almost Every Industry And Still Favorite For Last 40 Years. Compact Modular Design Needs Very Less Space To Operate And Maintain It.
Cooling towers.
Tower tech global : offers energy efficiency combined flow closed circuit cooling towers.
Tower tech global do offer wide range of frp cooling towers that assure optimal performance with standard quality integration to continue with the products for years. To know more on our frp cooling tower range and how we get popular as reputed manufacturers and exporters, contact us now.
Tower tech global is dedicated to designing and manufacturing the highest quality products for the evaporative cooling.
FRP Cooling tower, square cooling tower, round cooling towers, mixed flow closed circuit cooling towers, fill less cooling tower.
Masts / tower.Mast manufacturer and erection
Heavy machinery, water bottle, benches, rack, boiler tank, beer storage.Transportation and shipping
Tower bolt , doorkit , door stopper , door fittings.
Concrete mixer, weigh batch, tower hoist.
Engineering, cooling towers, FRP products, machinery parts.
Acsw, opgw, conductors, stringing tools, insulators, gis, tower earthing, ofc.Sales, servicing, shipping
Cranes, forklift, loader, compressors, vibratory roller, crawler crane, tower crane, rock breaker, bobcat skid steer loader.
Scientific testing equipments, construction equipments, tower hoist, belt conveyor, traffic safety instruments, surveying instruments, security instruments.
Hardware accessories, hardware products including mortice handles, pull handles, grab rails, cabinet handles, drawer handles, drawer knobs and tower bolt.
.Structural drafting services: foundation plan drawing with footing and column schedules, shallow, deep and machine foundation drawings, sheet pile foundation drawings, structural layouts with decking, joist for reinforced cement concrete beam framing, roof truss and joist details, floor and roof framing plan with detail sections, pre-stressed structure drawings, reinforced cement concrete chimney with reinforcement details, tendon profile with co-ordinate for post tensioned slabs, reinforced cement concrete joint and slab details, staircase detailing, special structures like water retaining tanks, retaining wall, shell, decks, bulkheads, masts, funnels, bridges, transmission towers etc, curved and planar structures of side, bar bending schedule of all reinforced cement concrete structural elements as per relevant standards
