Red Garnet/ Garnet Abrasives have uses such as sand blasting media, water jet cutting, hole drilling & lapping, and making coated or bonded abrasive tools. We provide Garnet Mesh: 10/20, 20/40, 30/60, 40/60, 60/90, 90/120, 120/180, 180/240, 20/25, 25/30, 30/35, 35/40, 40/45, 45/50, 50/60, 60/70, and 70/80.
Advance 1). We are 100% manufacturer 2). With Good workshop environment(under constant temperature all the year round) to ensure stable quality; 3). With Advanced tunnel kiln baking equipment, Continous production, short cycle, high quality: 4). High stability and high temperature resistance; 5). Reduce material loss, low noise and low dust; 6). High efficiency, good cutting sharpness, high durability, with long uselife; 7). Fast comprehensive after-sales service. Packing 1). Shrink package first, 2). Inner brown box/colour box or plastic box/ metal box for 4"~5" discs; 3). Stardand export brown carton or color box. 4).Shipping by sea from china-mainland port
Abrasives Md-80 dispersible Ml-200 Mx-98 alumina (2)
Abrasives
Abrasives
Abrasive As one of the biggiest manufacturers and exporters in china, our annual production capacity is 50, 000, 000pcs of backing pads which are mainly used for manufacture of flap discs. 90% of our products are for international markets and most of the them are sold to europe, usa, japan and israel As one of the biggiest manufacturers and exporters in china, our annual production capacity is 50, 000, 000pcs of backing pads which are mainly used for manufacture of flap discs. 90% of our products are for international markets and most of the them are sold to europe, usa, japan and israel
Abrasives Material: brown fused alumina, 110g/sqm blue latex paper for car sanding and painting and furniture and wood. 2.Material: silicon carbide, 110g/sqm brown latex paper for car sanding and metal and marble and stone 100pcs per bale and 10bales per carton
Abrasives 100 lbs
Abrasives Brown fused alumina:green silicon carbide Packing size : 25kg/bag
Description Industrial Raw Materials are used for buffing, sanding, grinding, or polishing with other products such as Silica Flour, Limestone, Aggregate, Quicklime, Talc, Volcanic Rock and Calcium Carbonate. An abrasive is a material, often a mineral, that is used to shape or finish a workpiece through rubbing which leads to part of the workpiece being worn away by friction. While finishing a material often means polishing it to gain a smooth, reflective surface, the process can also involve roughening as in satin, matte or beaded finishes. As long as the abrasive itself is harder than the material you are trying to finish, an abrasive will be a very effective way of honing down any material to prepare it for use. Industrial Raw Materials Abrasives consist of minerals that can be either naturally-occurring or synthetic, such as calcite, emery, pumice, sandstone, garnet, borazon, ceramic, steel abrasive, and silicon carbide. When used for industrial applications such as mining, construction, railroad, and wholesale/retail operations, usage falls into several different categories: bonded, coated and others. A grinding wheel is a good example of a bonded abrasive, operated at very high speed to finish any material which is pressed against it. Sandpaper is the most commonly used coated abrasive, and is affixed to a backing material, such as paper or metal. While sandblasting a stream of Industrial Raw Materials Abrasives is thrown out on the surface of the workpiece to make it smooth or to remove the contaminants from the surface. Apart from this, these are used in automotive paints. Calcium carbonate is also an Abrasive that is used in toothpaste. In this particular application, hardness of the Abrasive is more than that of the contaminating agent but less than that of the tooth enamel. This helps in removing the bacterial plague without damaging the tooth enamel. Abrasives are also used in the processing of jewelry pieces.
Abrasive 1 ton per woven bay or 25kg per paper bag
Shandong kaitai group co., ltd. Is the largest manufacturer of metal abrasive in asia which integrates with technical research, development and production. Cooperating with material science & engineering college of shandong university and guided by experts and professors of metal abrasive field. The company has developed 8 series including cast steel shot, cast steel grit, steel cut wire shot, stainless steel shot, stainless steel cut wire shot, aluminium shot, zinc shot, copper shot, 80 kinds of abrasive products. The company could produces 250, 000 tons metal abrasive. Based on 300 million yuan (rmb) of fixed assets, with a yearly turnover of 500 million yuan (rmb). Kaitai steel shot abrasive (hongkong) co., ltd. Is in charge of overseas sales of steel shot, steel grit. The company is advanced & new technology enterprise of shandong province and national blasting & peening standardization technology committee unit. With strong technical force, advanced equipments like intermediate frequency induction furnace, centrifugal blasting machine and so on. The company could produces high strength, strong durability cast steel shot, cast steel grit through double quenching, tempering, screening and so on. The company has perfect quality control system. The company has introduced two ervin test machine from usa. Ervin test machine is mainly used for testing fatigue life of metal abrasive.
Abrasives are substances both natural and synthetic that are used to grind, polish, abrade, scour, clean, or otherwise remove solid material usually by rubbing action (as in a grinding wheel), but also by impact (pressure blasting). The most important physical properties of materials that qualify as abrasives are hardness, toughness (or rigidity), grain shape and size, character of fracture (or cleavage), and purity (or uniformity). In the final analysis, the choice of a high-grade abrasive depends upon the quality and quantity of work performed by the abrasive per unit of cost. Initial cost of an artificial abrasive may be much greater than that of a natural abrasive, but the artificial mineral may do so much better work and do it so much faster than the ultimate cost is less. It is for this reason that artificial abrasives have largely replaced natural abrasives. Chemical Properties: Purities are available from PreRish Tri sometimes as high of a typical purity as 99.999% down to low purity recycled abrasive grains or powders Physical Properties: Numerous shape and size options are usually readily available from READE as large as 50 mm grinding and tumbling media down to as small as 20 100 nanometer particles. Typical Applications: Buffing, coated abrasives, coatings, deburring, electrical potting insulation, fillers, fining, flow finishing, friction, grinding wheels, heat transfer component, investment casting molds, wear resistant parts, metal lapping, polishing, pressure blasting, slurry sawing, tumbling, ultrasonic machining.
GG2112210054 Garnet Abrasive
a. Name of product: Garnet abrasive b. Price of product: Kindly contact us regarding price. c. Product origin: Rajasthan, India. d. Key Specifications/Special Features: Best quality garnet abrasives used in water jet cutting, sandblasting, and filtration process. Since 2015 we are working with more than 150+ customers and we always ensure our customers with the best quality service. Also, we provide 99% of the garnet with a test certificate. our triple washed abrasive processed with our R.O. water plant gives it a special color along with fewer dust materials. e. Harmonization System (HS) Code: f. Minimum Order Size: one container. g. Packaging Details: 25 kgs Bags, 1 mt Jumbo Bags (with good quality loop and hook) h. size - 120 mesh size
a. Name of product: Garnet abrasive b. Price of product: Kindly contact us regarding price. c. Product origin: Rajasthan, India. d. Key Specifications/Special Features: Best quality garnet abrasives used in water jet cutting, sandblasting, and filtration process. Since 2015 we are working with more than 150+ customers and we always ensure our customers with the best quality service. Also, we provide 99% of the garnet with a test certificate. our triple washed abrasive processed with our R.O. water plant gives it a special color along with fewer dust materials. e. Harmonization System (HS) Code: f. Minimum Order Size: one container. g. Packaging Details: 25 kgs Bags, 1 mt Jumbo Bags (with good quality loop and hook) h. size - 20 - 40 mesh size
a. Name of product: Garnet abrasive b. Price of product: Kindly contact us regarding price. c. Product origin: Rajasthan, India. d. Key Specifications/Special Features: Best quality garnet abrasives used in water jet cutting, sandblasting, and filtration process. Since 2015 we are working with more than 150+ customers and we always ensure our customers with the best quality service. Also, we provide 99% of the garnet with a test certificate. our triple washed abrasive processed with our R.O. water plant gives it a special color along with fewer dust materials. e. Harmonization System (HS) Code: f. Minimum Order Size: one container. g. Packaging Details: 25 kgs Bags, 1 mt Jumbo Bags (with good quality loop and hook) h . size - 80 mesh size
a. Name of product: Garnet abrasive b. Price of product: Kindly contact us regarding price. c. Product origin: Rajasthan, India. d. Key Specifications/Special Features: Best quality garnet abrasives used in water jet cutting, sandblasting, and filtration process. Since 2015 we are working with more than 150+ customers and we always ensure our customers with the best quality service. Also, we provide 99% of the garnet with a test certificate. our triple washed abrasive processed with our R.O. water plant gives it a special color along with fewer dust materials. e. Harmonization System (HS) Code: f. Minimum Order Size: one container. g. Packaging Details: 25 kgs Bags, 1 mt Jumbo Bags (with good quality loop and hook) h. size - 30 - 60 mesh size
a. Name of product: Garnet abrasive b. Price of product: Kindly contact us regarding price. c. Product origin: Rajasthan, India. d. Key Specifications/Special Features: Best quality garnet abrasives used in water jet cutting, sandblasting, and filtration process. Since 2015 we are working with more than 150+ customers and we always ensure our customers with the best quality service. Also, we provide 99% of the garnet with a test certificate. our triple washed abrasive processed with our R.O. water plant gives it a special color along with fewer dust materials. e. Harmonization System (HS) Code: f. Minimum Order Size: one container. g. Packaging Details: 25 kgs Bags, 1 mt Jumbo Bags (with good quality loop and hook) h. size - 12 - 20 mesh size
We are in the midst of the reckoned names in the industry, offering world-class range of SUPER Garnet Abrasive that are highly praised among the clients for high quality and durable standards. We offer them in varied technical specifications and are weather-resistant. With the backing of experienced professionals, we offer world-class product line. 300t MT Per Month.
