#Characteristics: 1. High reliability at high current stress. 2. Self-healing properties. 3. Flame retardant plastic case and epoxy resin. 4. Low losses, high dv / dt capability. 5. High moisture 主resistance. 6. High stability of capacitance and long life Specifications: Operating Temperature:-40 TO + 85 Rated Voltage:250, 400, 630VDC Capacitance Range:0.0047 TO 3.9 µF Capacitance Tolerance: ±5%, ±10% Insulation #Resistance: Câ?¦0.33uF ; IR 50000MOhm C>0.33�µF ; IR 15000MOhm Dissipation Factor:0.1% max. at 1KHz, 20â?? Dielectric Strength:160% of rated voltage for 60s
Characteristics: 1.High reliability 2.Box type provides the identical outer appearance. Specifications: Operating Temperature Range: -40â +85 Rated Voltage: 63V, 100V, 160V, 250V, 400V, 630V Capacitance Range: 0.0010 µF 2.2 µF
Characteristics 1. Highly reliable because of its excellent Self-Healing performance. 2. Dissipation Factor is normally low and it is #stable #against #high #frequency and change of temperature. 3. Recommended for #high- #frequency #circuits like s-curve compensating circuit Specifications: Operating Temperature: -40â?? TO + 85â?? Rated Voltage:DC 100V, 250V, 400V, 630V Capacitance Range:0.01 TO 8.2Mfd Capacitance Tolerance: ±5%, ±10%, ±20% Dissipation Factor: 0.001 at1KHz (Typical 0.002 Max)
Specifications: Voltage Rating 310 VAC Capacitance Range 0.0047 10uF Capacitance Tolerance ±10% std. Features: -Used in across-the-line -Interference suppression circuit -Obtaining certification recognition from #VDE, #ENEC and #UL institutions
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: â?¤50m�© Full Travel: 0.25�±0.1mm Operating Force:1.6�±0.5N Common Height: 2.5mm, 2.7 mm, 2.9mm, 3.1 mm, 3.4mm, 3.7 mm, 4.3mm, 5.0 mm The Heightï¼?Hï¼?can be set at the full discretion of the consumer. Strong Features Type: SMD surface mounted tact switch Operating Life cycles: 80000 Positive tactile feeling Various heights, Top or side actuated Reflow solderable, SMD type, which can be directly mounted on PC board Available With anti-ESD ground terminal RoHS and REACH compliant
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: â?¤100m�© Full Travel: 0.25�±0.1mm Operating Force:2.6�±0.5N Common Height: 2.5mm, 2.7 mm, 2.9mm, 3.1 mm, 3.4mm, 3.7 mm, 4.3mm, 5.0 mm The Heightï¼?Hï¼?can be set at the full discretion of the consumer. Strong Features Type: SMD surface mounted tact switch Operating Life cycles: 60000 Large choice of caps,Top or side actuated Sharp feeling, Reflow solderable SMD type, which can be directly mounted on PC board RoHS and REACH compliant
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: â?¥100M�© Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: â?¤50m�© Full Travel: 0.25�±0.1mm Operating Force: 1.0�±0.3N, 1.6�±0.5N, 2.6�±0.5N Common Height: 4.3mm, 4.5 mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm The Heightï¼?Hï¼?can be set at the full discretion of the consumer. Strong Features Type: SMD surface-mounted tact switch Operating Life cycles: 60000, 80000,100000 Various Knobs for low or high profile actuation PCB or SMT Terminals, Off-Momentary ON function Snap-in type, which can be directly mounted on PC board. Some of the output terminals can be also used as jumper leads, thus making circuit design easy. RoHS and REACH compliant
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: â?¥100M�© Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: â?¤50m�© Full Travel: 0.25�±0.1mm Operating Force: 1.0�±0.3N, 1.6�±0.5N, 2.6�±0.5N Common Height: 4.3mm, 4.5 mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm The Heightï¼?Hï¼?can be set at the full discretion of the consumer. Strong Features Type: SMD surface mounted tact switch Operating Life cycles: 60000, 80000,100000 Positive tactile feeling, Variety of lever lengths PCB or SMT Terminals, Off-Momentary ON function Snap-in type, which can be directly mounted on PC board. Some of output terminals can be also used as jumper leads, thus making circuit design easy. RoHS and REACH compliant Typical Applications For the operating of electronic devices like telecommunication equipment, audio devices, office devices, communication devices, measuring instruments, TVs, video recorders, automotive sets, etc
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 50m Full Travel: 0.25 ±0.1mm Operating Force: 1.0±0.3N, 1.6±0.5N, 2.6±0.5N Common Height: 4.3mm, 4.5 mm, 5.0mm, 5.5 mm, 6.0 mm, 6.5 mm, 7.0 mm, 7.5 mm, 8.0 mm, 8.5 mm, 9.0 mm The Height H can be set at the full discretion of the consumer. Strong Features Type: SMD surface mounted tact switch Operating Life cycles: 50000, 80000,100000 Variety of lever lengths PCB surface mount with flush and protruded actuator Positive tactile feedback with double actions Distinctive snapping action and extended mechanical/electrical durability. Available in embossed taping packages for automatic mounting RoHS and REACH compliant
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: â?¤100m�© Full Travel: 0.25�±0.1mm Operating Force: 2.6�±0.5N Common Height: 1.5mm, 1.6 mm The Height can be set at the full discretion of the consumer. Strong Features Type: SMD surface mounted tact switch Operating Life cycles: 100000 Dust proof and Flux proof Low-profile and Lightweight Good drop resistance, Reflow solderable Contact sealed construction offers a highly reliable switch RoHS and REACH compliant
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 50m Full Travel: 0.25�±0.1mm Operating Force: 1.0±0.3N , 1.6±0.5N ,2.6±0.5N Common Height: 3.8mm, 4.3 mm, 5.0mm, 6.0 mm, 7.0 mm The Height H can be set at the full discretion of the consumer. Strong Features Type: SMD surface-mounted tact switch Operating Life cycles: 80000 Various Knobs for low or high profile actuation PCB or SMT Terminals, Off-Momentary ON function Snap-in type, which can be directly mounted on PC board. Some of output terminals can be also used as jumper leads, thus making circuit design easy. RoHS and REACH compliant Typical Applications Wide range of using in electrical devices such as telecommunication equipment, audio devices, office devices, communication devices, measuring instruments, TVs, video recorders, automotive sets, etc
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 50m Full Travel: 0.25±0.1mm Operating Force: 1.6±0.5N Strong Features Type: SMD surface-mounted tact switch Operating Life cycles: 50000 Highly reliable contacts sealed structure. A larger top surface of the stem improve mounting speed. Reflow solderable, RoHS and REACH compliant typical Applications Function and band selectors switches for audio devices, video recorders, communication devices, cameras, automotive sets, electric home appliances, compact electronic devices, etc.
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 50m Full Travel: 0.25±0.1mm Operating Force: 1.6±0.5N Strong Features Type: SMD surface-mounted tact switch Operating Life cycles: 50000 Flux proof, Reflow solderable. Sharp click feel with a positive tactile feedback Highly reliable contacts sealed structure. Larger top surface of the stem improve mounting speed.
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: â?¥100M�© Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: â?¤100m�© Full Travel: 0.15�±0.05mm Operating Force:2.3�±0.3N Strong Features Type: SMD surface mounted tact switch Operating Life cycles: 200000 IP65 equivalent to IEC/EN 60529 Miniature tact switches, With high contact reliability Fixing poles of the cover available, Compact-sized, Side actuated PCB-base structure, RoHS and REACH compliant
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: â?¥100M�© Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: â?¤100m�© Full Travel: 0.2�±0.1mm Operating Force:1.6�±0.5N, 2.6�±0.5N Strong Features Type: SMD surface mounted tact switch Operating Life cycles: 20000,30000,40000,50000 Sharp feeling, High contact reliability Low-profile and light weight Compact size of 3x3x0.65mm Contributes to downsizing and lighter weight of application devices. Reflow solder able , Rated to RoHS and REACH standard
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 50m Full Travel: 0.2 ±0.1mm Operating Force:1.6 ±0.5N, 2.6 ±0.5N Strong Features Type: SMD surface mounted tact switch Operating Life cycles: 20000,30000,40000,50000 Low-profile , Reflow solderble Quiet operation and definite clicking feel Improve mounting density of components on PC board Contacts are completely sealed, enhancing reliability. Available with ground terminal for electrostatic discharge RoHS and REACH compliant
Main Specifications Operating Temperature Range: -20 to +70 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: â?¤100m�© Full Travel: 0.25�±0.1mm Operating Force: 1.6�±0.5N Strong Features Type: SMD surface mounted tact switch Operating Life cycles: 200000 Compact-sized, Side actuated High contact reliability, Good drop resistance Reflow solderable , Fixing poles of the cover available PCB-base structure ,which can be directly mounted on PC board Available in embossed taping packages for automatic mounting. Sealed with flux proof, RoHS and REACH compliant
Main Specifications Operating Temperature Range: -30 to +85 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: 100M Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: 100m Full Travel: 0.15±0.0.1mm Operating Force: 1.6±0.3N Strong Features Type: SMD surface-mounted tact switch Operation Life cycles: 200000 Positive tactile feedback, Dust proof and Flux proof High contact reliability, Low-profile and light weight Contributes to downsizing and light weight of application devices
220v 380V AC drive and solar pump inverter 0.75kw to 400kw
Main Specifications Operating Temperature Range: -40 to +90 Rated Current and Voltage: 50mA. / 12V DC Insulation Resistance: â?¥100M�© Dielectric Strength: 250V AC (50Hz or 60Hz) for 60 seconds Contact Resistance: â?¤100m�© Full Travel: 1.3�±0.2mm Operating Force: 1.6�±0.5N Strong Features Type: DIP with ground terminal tact switch Operation Life cycles: 100000 Soft feeling High operating force Steady and low contact resistance Compatible with most surface mount soldering processes Improved operation by using a larger push plate RoHS and REACH compliant
