Chlorinated polyethylene (CPE) is one kind of high molecule elastic material developed in late years, which is one of the random chloride produced through reaction of polyethylene and chlorine. Along with rapid development of plastic and rubber industry, its application becomes much wider. Most of them are used for Plastic and rubber processing industry. It can be solely or cross-blended with other materials to Produce plastic profile shapes, waterproof winding materials, antiflaming conveyer belts, wire and Cable covers, color bike tires and magnetic adhesive strips of refrigerator. Also, it is a kind of Perfect modifier. Properties: 1) Good aging resistance and stability 2) Perfect weather ability and can have long service life under bad weather conditions 3) Bending and cracked deformation resistance, chemical resistance and organic Solvent resistance 4) Excellent low-temperature resistance and electrical specifications 5) Superior high filling property, the physical property cannot be changed after adding A lot of filling agent into CPE Range of applications: 1) CPE generally falls into two categories: CPE and CM 2) CPE type can be used as both modifier of hard plastic product and plasticizer of Soft plastic product 3) Plastic type CPE can be used solely, and also can be cross blending processed Together with other plastic materials 4) CPE product produced by our company has the characteristics of low remnants Crystallinity and proper hardness, which makes product has certain rigidity and Does not modify its toughness
Industrial chemicals, chlorinated solvents, inorganic chemicals, salts.
We are representing one of the largest European manufacturer for Potassium Sulphate. We are looking for local distributors in : - Sri Lanka - Saudia Arabia - UAE - Bahrain - Oman - Malaysia .
Calcium chloride 77-80% food and technical grade Calcium chloride 94% min technical grade European origin. 25 kg bags, 1 mt jumbo bags.
The product contains Citrus oil extraction, wheat chitosan, glucoside coconut oil ester, polysorbate, polyglycerol Ricinoleate, de-ionized water Does not contain phosphorus, chlorine, benzene, plasticizers, petrochemical surfactants, fragrances, preservatives or other harmful substances 99% or more antibacterial and biodegradability. Does not pollute water nor damage ecology saving effort and water, non-toxic and harmless, natural and environmentally friendly.
Chlorinated polyethylene , cpe , acrylic impact modifier , acrylice processing aid for pvc profiles, pa of pvc products, impact modifier , pvc additives, pvc stablizers , zinc calcium stablziers plastic raw material like pvc compound stabilizers..
We can supply all the engine parts as followings, Engine Brand, 1) Weifang Ricardo 295 2100 495 K4100 K4102 R4100 R4105 R4108 R4110 R6105 R6108 R6110 6113ZLD 2) Weichai Steyr WD615, WD618, WD12 3) Weichai Deutz 226B 6160A 6160Z 6170, CW200 4) Weichai Landking WP6, WP7, WP10, WP12 Engines parts name, 1) Ail/Fuel Filter 2) Air/Fuel Filter Element 3) Cylinder Head 4) Cylinder head gasket 5) Starter 6) Piston 7) Fuel pump 8) Oil seal 9) Water temperature, oil pressure, oil temperature meter 10) Crankshaft 11) Cylinder block 12) Camshaft 13) Valve 14) Connecting rod 15) Flwheel 16) Air Intake/Exhaust Pipe And so on...
(1) Diesel engine for generator use (2)Diesel engine for water pump use 2 Diesel engine spare parts (1)Diesel engine for generator use 代表å?¾ç??ï¼?495D Type Cyliner/Bore/Stroke Intake Method Combustion Type Rated Output/ Speed Min. Fuel Consumtion Net Weight (mm) (Kw/r/min) (g/kw.h) (kg) 495D 4/95/115 Natural Aspirated Turbo Method 26.5/1500 246 380 495D2 4/95/115 Natural Aspirated Turbo Method 30/1800 246 380 K4100D 4/100/115 Natural Aspirated Turbo Method 30.1/1500 246 380 K4100D2 4/100/115 Natural Aspirated Turbo Method 34/1500 246 380 K4100ZD 4/100/115 Turbocharged Turbo Method 42/1500 235 390 K4100ZD2 4/100/115 Turbocharged Turbo Method 45/1800 235 390 N4102D 4/102/120 Natural Aspirated Direct Inject 36/1500 235 380 N4102ZD 4/102/120 Turbocharged Direct Inject 48/1500 230 390
Acrylic resin impact modifier ACR 1.Introduction Impact modifier ACR-IM product line is a new generation of core-shell acrylic copolymer, the core layer of glass temperature is -50 - 55 The series of impact modifier-impact modifier and processing to improve performance in one, to increase the products of weathering and surface gloss, anti-aging properties, especially suitable for outdoor use products, widely used in the profile, non-transparent sheet, plate , Pipe, PVC pipe, and other indoor and outdoor products. 2.Physicochemical properties Specification Item IM-10 IM-20 IM-30 Appearance White freely flowing powder Granularity (percent of pass at 20 mesh) % 98 Volatility% 1.2 Apparent densityg/ml 0.40-0.55 Core glass transition temperature -50 -48 -55 3.Characteristics (1)Excellent weatherability. (2)Excellent impact resistance (3)Excellent processability 4.Use direction IM-10 has a normal processing performance and high resistance to impact and the need to use a small amount of processing aid; IM-20 has a high processing performance and better impact resistance and, without the use of a processing aid; IM -30 Do not have the processing performance, but with excellent impact performance, need to use of processing aid. 5.Recommended dosage Product Profiles Pipes fittings Plates Recommended dosage 6-7 6-9 3-6 6-7 6.Storage, packaging, transport This product is packed in sealed plastic bags and then put into weave bags, the bags with product certification, packaging bags external annotated: trademarks, manufacture, product weight.
1.Introduction The series is based on acrylic polymer with functional organic materials and inorganic nano-materials into complex mix of PVC processing modifier. Manly used for PVC profile, pipe. 2. Types LP1401 Item Specification Appearance White freely flowing powder Granularity (percent of pass at 40 mesh) % 98 Volatility% 1.2 Intrinsic Viscosity 2.0-4.5 Apparent density g/ml 0.35-0.55 The intrinsic viscosity is determined in the chloroform solution, 25 centigrade with 0.5-0.6mm Ukraine type viscometer. .3. Characteristics and Application: In the hard PVC products by adding a small amount of (1.5-2.0) the series of processing aid, the promotion of PVC will be able to gel and improve the melt strength of the melt, obviously improve the physical properties and surface finish of products. 4.Packaging Products are packed in sealed plastic bags, and then in weave bags The net weight for each bag is 20kg or 25kg.
100% Acrylic Size: 60x200cm+2cm frayed fringes Super Soft and Warm So versatile, wraps around perfectly for fall & winter Hand Wash Cold Only Non-Chlorine Bleach When Needed Dry Flat Cool Iron
Product: Boys boxer shorts. Fabric: 95% Cotton / 5% Elastane max, 150gm/m2, single jersey. Descriptions: Boys slim fit, normal leg, printed boxer. Printing: Reactive printing dyes, water paste printing. Washing: Max temp, 60 C, Do not use chlorine bleach, Dont drying wash, Dont dry cleaning, Middle temp, ironing.
Brightway nitrile examination gloves AQL 1.5 Size: S, M, L CE certification FDA certification ISO 14385 EN 455-1-4 ASTM D3478/ Certificate - CE, FDA, ISO / Design and Features Smooth - Online Powder Free Gloves Textured - Offline Double Chlorinated Gloves Finger Flex Textured - Polymer Coated Gloves Finger Flex Technology - Tapered and Beaded Cuff Chemical Gloves - Neophrene Gloves Tri-polymer Gloves Thickness Palm - 0.08~0.16mm Finger - 0.12~ 0.19mm Sizes: Ambidextrous - XXS, XS, S, M, L, XL, XXL, XXXL / Hand Specific - 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 10.0 Color: Natural, Blue, Green, Black, Brown, Orange, Blurple Made in Malaysia
PRODUCTION: 7 million boxes per month PAYMENT TERMS: 30% TT deposit, 70% LC Ex-Works Vietnam Gloves info: - FDA approved - CE certified - Type : Non-sterile, Powder-free - Material : Acrylonitrile Butadiene Synthetic Rubber Latex - Color : White/Black/Blue - Size : XS, S, M, L, XL - Features : Ambidextrous, Straight Fingers, Finger-textured, Beaded Cuff, Polymer Coated/ Online Chlorinated - Length(mm) : 240 - Width(mm) : XS(75±10), S(80±10), M(95±10), L(110±10), XL(110) - Thickness : Fingers(0.05mm min.), Palm (0.05mm min.) - Tensile strength : 18Mpa min. before aging, 14Mpa min. after aging - Elongation at break: 500% min. before aging, 400% min. after aging
Disposable Vinyl/Nitrile Blend Examination Gloves The Vinyl/Nitrile Blended glove is a new type of synthetic glove that was developed based on the vinyl glove production technology. Its material is compounded with PVC paste and Nitrile latex, so the finished production has the advantage of both PVC and Nitrile gloves. Specification Mixed nitrile gloves have the advantages of latex gloves and nitrile gloves: 1.acid, alkali, oil resistance, non-toxic, harmless, and tasteless. 2.The inner layer of gloves is smooth and easy to wear. 3.The outer layer of gloves has a certain friction coefficient, which is easy to use and reaches the standard of rough on outer layer and smooth inner layer. And due to the design of the inner layer was nitrile, it can prevent the protein in the latex layer from oozing out and solve the problem of protein allergy in latex gloves. 4.In contrast to general polymer coatings, nitrile can be chlorinated to make it smooth without damaging its structure. 5. soft feel, comfortable and non-skid texture, and flexible usage operation. 6.With softness, comfort and stick chiral, with durability and safety, etc, do not contain phthalic acid ester, silicone oil, amino compounds, have very good cleaning performance and antistatic properties, ageing resistance and oil resistance properties, the modelling of glove hand type is designed according to the human body, with great alertness, excellent tensile properties and puncture resistance, high tensile strength and excellent wear resistance.
