Do you have a scrap ceiling fan motor stator that needs to process Which machine is used in cutting your ceiling fan This is a new model ceiling fan stator cutting machine working video, cutting copper winding wires for copper scrap recycling. Using this useful ceiling fan stator cutting machine, you can cut and recycle copper from the motor stator quickly and efficiently, useful and convenient. Motor power is about 3KW and machine weight is about 267kg. Are you interested in this new ceiling fan motor cutter
Transformer recycling machine is mainly used to recycle a variety of small transformers. First, the scrap transformer is cut in half by a cutter of the transformer cutting machine, and then the puller of the transformer pulling machine pulls out copper winding from the processed transformer to complete the whole copper winding wires recovery. Transformer cutting pulling machine details: Name: Electric Transformer Breaking Machine Machine Weight: 240kg Package Weight: 300kg Machine Size: 120*73*123cm Package Size: 84*110*85cm Transformer recycling machine advantages: 1. Mainly used to deal with small used transformers; 2. Small size and high efficiency; 3. Save time and effort, also has a low price;
THE SEMI AUTOMATIC TIMING BELT CUTTING MACHINE FOR AND HEAVY DUTY BELTS. HAVING A HUGE CLIENT BASE MACHINE HAS A HIGHER ACCURACY OF 0.1mm.
The main problems affecting the service life of hydrogen production equipment are the shedding of cathode catalyst, the degradation of anode performance, and the decline of the hydrophilic and gas-repellent performance of the diaphragm. hydrogen production equipment has a unique life and durability strategy. 1. Avoid Cathode Catalyst Falling Off Pre-spraying technology" patent, the mechanical adhesion of Raney nickel on the surface of the nickel mesh is more reliable, and the service life is better guaranteed 2. Avoid anode performance degradation Anode edge sealing adopts a plate electrode" design to avoid local rapid oxidation deterioration and life decay of anode 3. Avoid the degradation of the hydrophilic and air-repellent properties of the separator While the surface layer of the diaphragm itself is hydrophilically modified, an additional hydrophilic modification layer is introduced, so that the hydrophilic and air-repellent effect is strengthened inside and outside, and the overall hydrophilic and air-repellent performance of the diaphragm is lasting and stable.
1. The fully automatic Hawthorn slicer is simple to operate. You only need to manually pour the Hawthorn into the gold silo of the equipment. 2. The operation panel drives intermittently to complete the conversion of three stations: feeding, punching and returning. 3. The equipment is made of stainless steel, which is solid and durable and not easy to damage. The slicing machine in Hawthorn processing plant is composed of motor, variable speed mechanism, tool rest, step-by-step material return, adjustable tool rest machinery, etc., so that the cut chip shape is uniform, the feeding distance can be controlled freely, and the bad situation of material extrusion will not be caused. Reasonable layout makes the machine easy to operate, light in appearance and light in weight. The work of this machine is mainly composed of two parts: feeding and cutting, machinery, etc.
(1) The full-automatic Ximei nuclear remover adopts a device with high degree of automation and automatic feeding and feeding of mold conveyor belt for conveying and core washing. It only needs to pour the fruit into the feed hopper to complete the separation effect of core and meat. It can work continuously and solve the difficulties of low efficiency, labor-consuming and time-consuming manual nuclear removal. (2) The structure of the full-automatic Ximei nuclear remover is composed of 304 stainless steel thick wall square tube and channel steel welding, which enhances the stability of the equipment during startup and operation. All parts are fastened and assembled with bolts, making the equipment more convenient and fast in operation and maintenance. (3) The raw material of the equipment is made of 304 stainless steel, which fully meets the hygienic standard of food processing equipment. The conveyor belt is made of imported polyurethane, which is anti-wear, tensile and tear resistant, and has a longer service life. (4) The automatic Ximei de coring machine is simple and convenient to operate and does not need to be watched for a long time. One person can manage multiple machines at the same time. The transmission system adopts the design concept and standardized components. The core punching principle adopts the process of machine tool to punch the core, so that each equipment meets the design standard and has high precision, so that the effect of de coring rate is good, and the shape of fruit is completely unchanged.
EVA TPU PE Sole Foaming Machine is one kind of physical foaming equipment which uses supercritical fluid foaming technology to inject carbon dioxide or nitrogen as the foami ng medium into the supercritical foaming equipment, so that the gas and the molten raw material are fully mixed and diffused to form a single-phase mixed sol, which produces a large amount of sol. The pressure drop caused the gas to separate out to form a large number of bubble nuclei. In the subsequent cooling and molding process, the bubble nucleus inside the sol continuously grows and forms, thereby obtaining a microcellular foamed plastic product. The supercritical foaming equipment is an important equipment to realize this process.
Microbial Bioreactor FU500 for Agriculture, Aquaculture, Livestock farming with Seed Kits included we provides a microbial bioreactor to farming businesses and it's the first in the world. Our goal is to remove chemicals from the industries of agriculture, aquaculture and Livestock farming and our global partners are already replacing chemicals with our Functional Microbes Farmers themsleves can produce Effective Microbes and apply to issues such as pest, disease, crop growth, acidic soil and others. FU500 bioreactor can save Lots of farming cost as the farmers can create Effective Microbes and do not have to rely on Off-The-Shelf microbial products Our customers in NZ, Ecuador, USA, Vietnam, Thailand, South Africa are changing the industry in an eco-friendly way and creating profits in a sustainable way. - Program-controlled Fermenter - Digital control with a touch screen applied - UV-C LED applied - Low maintenance - Easy to clean - Payback period 6 months - Price Negotiable
Concrete Batching Plants USC120 series Stationary Concrete Batching Plant provides high security. It recovers from quick and easy installation. In CE standards, students are the most used business tools in the industry with high quality and common. The parts of our Stationary Concrete Plant are designed with a minimum production facility on site. Concrete Batching Plants are sent internationally in the correct manner. TECHNICIAL SPECIFICATIONS Plant Capacity: 120 m Mixer Specifications Mixer Capacity: 3 m Dry Filling Capacity: 4500 liters Compacted Concrete: 3000 liters Motor Power: 2x55 Weighing Hopper Capacities Aggregate Weighing Capacity: 7000 kg Cement Weighing Capacity: 1800 kg Water Weighing Capacity: 1000 liters Additive Weighing Capacity: 30 liters Aggregate Hopper: Aggregate Compartment: 4-6 pieces Compartment Capacity: 30-40 m Total: 120-240 m Concrete Batching Plants USC120 Stationary Concrete Batching Unit Equipment: Aggregate Hopper: Weighing Belt: Transfer Tape: Aggregate Waiting Hopper Cement Weighing Hopper: Water Weighing Chamber: Additive Weighing Chamber: Compressed Air Installation: Twin Shaft Mixer: Mixer Chassis Moving Platforms and ladder Filter, Safety Valve and Accessories PC and Automation System: Cement Silo: Control Cabinet: Please CALL us for our other Concrete Batching Plants and customer-specific solutions
The PVC door and window profile production line can choose different specifications of conical twin-screw extruders according to different profile sections and molds, and configure the corresponding vacuum calibration table, tractor, cutting machine, stacker and other auxiliary equipment.
COD HDPE cable communication protect pipe production line Advantage 1. Easy operation; 2. stable running , 3. high output , and very popular in home country and abroad. Product Parameters Model SJ-75(PE) L/D 30:1 Pipe Diameter(mm) 50-200 Output(kg/h) 150-200 Production speed (m/min) 1.5 Main Parameters Model SJ-65/33(PE) SJ-90/30(PE) L/D 33:1 30/1 Pipe Diameter(mm) 16-32 32-63 Output(kg/h) 150 200 Production speed (m/min) 12-15 8-15 Power (kw) 37 50 The machinery electric parts details ITEM 1 Motors 2 PLC (customized) SIEMENS 200 series 3 Interface module(customized) SIEMENS 4 Touch screen(customized) SIEMENS 5 Low voltage electrical SIEMENS&SCHNEIDER 6 Inverter ABB 7 Temperature control system OMRON
Product Description Raw materail: PVC+Other chemical Product Introduction: The PVC door and window profile production line can choose different specifications of conical twin-screw extruders according to different profile sections and molds, and configure the corresponding vacuum calibration table, tractor, cutting machine, stacker and other auxiliary equipment. Technical Parameter: Model TPM-180 TPM-300 TPM-600 Width 180 300 600 Model SJSZ-51/105 SJSZ-65/132 SJSZ-80/156 Capacity(kg/h) 180 250 350 Motor power(kw) 22 37 55 Total length(m) 18 22 26 Machine List SJSZ Extruder Mould Vacuum calibration table Haul off Cutter Stacker
PRODUCT INTRODUCTION High-Speed Mixer is used in the material mixing, stirring, coloring and other process for plastic, rubber, daily chemical and other industries. It is the perferable equipment to produce plastic board, pipes, profiles and degradable plastics. Features: (1) Mixed materials are made by negative pressure mixed principle (2) The electrical instruments are all well-known imported appliances with PLC programmable control (3) High degree of automation and speed mixing (4) The blade was made by stainless steel pressure and passed the static and dynamic balance test (5) Especially the coolant blade ued abroad advaned spiral mixing structure, the whole container has no dead angle, cooling speed and discharging clean. (6) Large volume Composition of Mixer Name Quantity(set) Motor 1 Pot cover 1 Inner container 1 Blades and deflectors 1 Air cylinder 1 Pneumatic control system 1 Motor 1 Inner container 1 Water-cooled blades 1 Electrical control cabinet 1 Operating platform 1 Technical Parameter Feeding way Spiral feeder Pot body material Stainless Steel Unloading way Pneumatic discharge Mixing time 10-12mins Hot mixing power 55kw Cooling mixing power 7.5kw Pot cover material Cast aluminium Blade material Stainless Steel
Product Description Plastic Twine and rope filament extruding machine is automatic production line for PET, PP, HDPE, PA monofilament which is used to produce different kinds plastic rope and twine product.This unit can produce PET, PP, PE,PA monofilament automatically for plastic rope product. To make different raw materials plastic rope fiber, we have advanced and professional machine line design and technology support which is in leading position in this field. With recycled raw material, and less labor requirements, the production cost is cheap, so our clients will get good profit in the market. Advantage 1. Most experienced manufacturer: Professional machine and mature technology with more than 20 years experience. 2. Green and Eco-friendly: 100% recycled PET flakes as the raw material for PET filament and can be recycled many times 3. Machine Development: Continuous improvement and feedback from Customers from more than twenty countries all around the world. 4. Better performance: low energy consumption, high production capability 5. Automatic Operation: Automatic and convenient operation with one or two workers Technical Parameter Model TPM-75 TPM-80 TPM-90 Screw L/D 30:1 30:1 30:1 Gearbox model 200 225 225 Main motor 18.5kw 22/30kw 30/37kw Capacity(kg/h) 80-100kg 100-120kg 120-140kg Mould Dia. 200 200 200 Filament Dia. 0.01-2.5mm 0.015-2.5mm 0.015-2.5mm Machine List 1 SJ75/SJ80/SJ90 single screw extruder 1 set 2 Die head 1 set 3 Water-cooling tank 1 set 4 First tensile machine 1 set 5 Pre-heating machine 1 set 6 Second tensile machine 1set 7 Third tensile machine 1 set 8 Oil bath tank 1 set 9 Pneumatic tensioner 1 set 10 Two position winder 1 set Electrical Configuration 1) Main motor frequency controller: ABB 2) Temperature controller: OMRON 3) AC contactor: SIEMENS 4) Thermal overload relay: SIEMENS 5) Breaker: CHINT or according to customer requirement
Product Description Usual sheet width: 760, 840, 930, 1560mm Usual sheet thickness: 1-3.5mm Advantage: 1. No bad smell, fresher environmental conditions 2. Final product more transparent, good for sun light 3. Sheet production is very simple, no dust pollution Machine List Item Name 1 Conical twin screw extruder 2 Single screw extruder 3 Hopper type drying unit 4 Extruding mould and distributor 5 Two roller calender 6 Decking roof forming unit 7 Cutting unit 8 Stacker 9 ridge roof mould 10 oven 11 Compressing unit 12 Flat board haul off unit 13 Electrical unit Technical Parameter Structure Material Width Thickness ExtruderModel Designed Output Single layer PVC 720mm-1560mm 1.0-3.5mm SJSZ-80/156 300-400kg/h Double layers ASA/PMMA+PVC 1.2-3.5mm SJ-50/30+SJSZ-80/156 300-400kg/h Triple layers ASA/PMMA+PVC PVC 1.5-3.5mm SJ-50/30+SJSZ-65/132 +SJSZ-65/132 300-400kg/h Triple layers PVC+PVC foamed+PVC 1.5-3.5mm SJSZ-51/105+SJSZ-65/132 +SJSZ-51/105 300-400kg/h Fourlayers ASA/PMMA+PVC +PVC foamed+PVC 1.8-3.5mm SJ-50/30+SJSZ-51/105+ SJSZ-80/156+SJSZ-51/105 300-450kg/h
Product Description Factory supply PE water pipe making machine is mainly used in the production of water supply and drainage pipes , which used for agriculture and construction , cable coating and other fields , the complete line is consisted of extruder , vacuum calibrator , hauling machine ,cutter and tipping rack , hauling machine unit has come ways of hauling , such as pillar type, three-claw type , four-claw type , six-claw type and so on . there are also knife-lifting cutter and planetary cutter with this extrusion line you can produce high quality water supply and gas supply pipes with excellent hardness and flexibility. Feature 1.The machine adopts DC/AC motor, and Eurotherm DC/AC digital converter and high efficiency screw to ensure high efficiency extrusion. 2. This production line adapts basket type composite die head, which ensures not only the uniformity of high speed extrusion but also the stable performance of tubular goods. 3. This production line adopts high efficiency double chamber vacuum calibrating technology and spray cooling bath to improve the rate of finished products of tubular goods and meet the demand of high-speed production. The vacuum bath and cooling bath adopt stainless steel. 4. This production line adopts multi-caterpillar haul-off and ensures the synchronization. 5. The cutting machine adopts special saw blade with low noise, equipped with chip collector. 6. The whole line adopts PLC control system and large liquid crystal screen, which makes the operation very convenient. Main Composition Compulsory devices 1 Material charge 1 set 2 SJ single screw extruder 1 set 3 Pipe die head 16-1200mm, 1 set or several sets 4 Vacuum calibrating tank 1 set or several sets 5 Water spraying cooling tank 1 set or several sets 6 2-3-4-6-8-10-12 caterpillars hauling off machine 1 set 7 no dust-cutting machine or planetary cutting machine 1 set 8 Pipe stacker-4000-6000mm length 1 set 9 Electrical cabinet(ABB, Omron, RKC, neider etc) 1 set 10 Spare parts 1 set Optional Devices 1 color mixer 1 set 2 Plastic crusher 1 set 3 Plastic shredding machine 1 set 4 Industrial water chiller 1 set 5 Air compressor 1 set 6 Thermocontroller for die head 1 set 7 Ink jet printer 1 set Technical Parameters Pipe Diameter 16-63 32-125 75-250 110-450 315-630 315-800 Extruder 65/33 75/33 90/33 120/30 120/33 150/33 Downstream LG63 LG125 LG250 LG450 LG630 LG800 Total power(kw) 70 150 230 380 550 800
PET Strap Making Machine This production line is used to product the pet packing band, pet packing strap; adopt the plc control the whole line do the automatic production, it use the melting pump and pressure sensor ensure the production stable and strap quality control the raw material you can use is 100% recycled pet flakes from the waste pet bottles, or virgin material or mixed with each other.
The PVC door and window profile production line can choose different specifications of conical twin-screw extruders according to different profile sections and molds, and configure the corresponding vacuum calibration table, tractor, cutting machine, stacker and other auxiliary equipment.
The PVC door and window profile production line can choose different specifications of conical twin-screw extruders according to different profile sections and molds, and configure the corresponding vacuum calibration table, tractor, cutting machine, stacker and other auxiliary equipment.
PE pipe production line is mainly used to produce PE water pipe, gas pipe, drain pipe and so on. Single screw extruder, very suitable to process PE resin with high capacity, max capacity can reach 1000kg/h,Diameter range is 16mm-800mm The production line adopts reasonable design, absorbing safe producing technology.
