Power supplyú¦220~240v/50hz Tkf(r)-35gw/btu12000/r22 Cooling & heating
We deliver you nihon spindle cooling tower in Iran. Origin : Malaysia
We deliver you nihon spindle cooling tower in iran. Origin : Malaysia
Our company to research, develop, manufacture and assemble air-conditioning units for central air-conditioning system are typical manufacturer company. The products are such as split air conditioningíópackaged air conditioning íówindow air conditioner íófan coil unit , air handling fan coil unit , air ¿ccooled/water-cooled chiller , heat recovery water chiller , temperature control/humidity control unit , packaged air handling unit , modular air-cooled heat pump unit , modular water source heat pump unit.
For removing hot air., fumes, smoke, irreating smel from the production area, Driven by wind and did not required electricity 50 no.
Suppy air flow rate :560 m¦/hr Cooling capacity:2646w Cartoon box Total weight 16.8 Cartoon dimensions:870mm*570mm*275mm
Tg-500b are used in the houses, the ventilating pipes and the small buildings. 1. The ball diameter (body diameter) is 620mm (25inch), and the throat diameter (inner diameter) is 500mm (20inch). 2. There are three kinds of materials they are made of: (a) stainless steel, (b) vanes stainless steel+ others galvanized sheet, (c) vanes aluminum + others galvanized sheet. 3. The volume of air discharge is about 950-4000 cbm/h. 4. It is about 8 kg/set and the ubc bearings we use are from the usa. 5. We guarantee the usage for 15 years. 6. We can design and manufacture other sizes according to your demands. 650mm*650mm*200mm
Tg-600 are usually used in the general industries and the storerooms. 1. Part one is the ball part and the diameter (body diameter) is 750mm, and part two is middle part and the throat diameter (inner diameter) is 600mm. The third part is base plate. 2. There are three kinds of materials they are made of: (a) stainless steel, (b) vanes stainless steel+ others galvanized sheet, (c) vanes aluminum + others galvanized sheet. 3. The volume of air discharge is about 1500-5000m3/h. 4. We can design and manufacture other sizes according to your demands.
Tg-880 are specially used in the big industrial workshops, storerooms, and the big buildings where there are much harmful air and the temperature is very high. 1.The ball diameter (body diameter) is 880mm, and the throat diameter (inner diameter) is 680mm. 2..The volume of air discharge is about 2600 to 6500 cbm/h. 3.There are three kinds of materials they are made of: (a) stainless steel, (b) vanes stainless steel+ others galvanized sheet, (c) vanes aluminum + others galvanized sheet.
Production description The raw material of tg turbine ventilations: Tg turbine ventilations are made of the stainless steel We use the advanced ubc bearings from the usa Features: 1.Do not need electric force 2) protection against high temperature, bad air environment 3) anti-corrosion, anti-acids and bases, anti-oxidation 4) long usage. The ball diameter is 420mm and the throat diameter is 300mm.
The ball diameter is 420mm and the throat diameter is 300mm. They are made of stainless steel and the ubc bearings we use are from the usa. We can design other sizes according to your demands. They are mainly used on the residential buildings, villas and the flues to ventilate and change the air. We guarantee the usage of our turbine ventilators for 15 years. The ball diameter is 420mm and the throat diameter is 300mm.
Specialized for telecommunication sector, roof top, ducted, VRV.
Lates wall mounted split air conditioner for 2010, energy and money saving, using famous japanese brand compressor: 1. We could produce split air conditioner, window air conditioner, and floor standing air conditioner, portable air conditioner, and tropical air conditioner. 2. Cooling capacity has 7000btu, 9000btu, 12000btu, 18000btu, 22000btu, 24000btu, and 48000btu. 3. Power supply; 220v/240v, 50hz/60hz, 3. Weather climate; t1, t3, suitable for different climate; 4. Performance; cool only, cool with heat 5. Use hitachi, darkin compressor 6. Have several different panels for your choice; 7. Delivery time is 25days.
Specifications: 1) btu: 12, 000 2) functions: cooling / heating 3) power: 220 240v / 50hz 4) capacity: A) cooling: 3, 200w B) heating: 3, 500w 5) rated input: A) cooling: 1, 300w B) heating: 1, 250w 6) rated current: A) cooling: 5.75a B) heating: 5.55a 7) dehumidifying capacity (l/h): 1.2l/h 8) air flow volume: 450m3/h 9) fan speed: 4(3speed + auto) 10) air flow direction: 5 11) noise db (a): A) indoor: 40 B) outdoor: 51 12) unit dimension (w x h x d): A) indoor: 800 x 290 x 196mm B) outdoor: 835 x 552 x 310mm 13) box dimension (w x h x d): A) indoor: 855 x 365 x 280mm B) outdoor: 895 x 635 x 355mm 15) suitable area:13 21m2 Features: 1) streamlined design 2) anion generator, thorough dust elimination 3) multi-layer air filter and ti02 cleaning apparatus, 4) keeps indoor air fresh 5) led motion display, easy to check its run 6) air flows in four directions by adjusting air duct louvers 7) humanized control way, combination with sound signal 8) electric lock function 9) big airflow, four way airflow 10) high cooling/ heating rate, energy-saving 11) low noise fan motor 12) low temperature start, electricity heating 13) english lcd remote control, compact and handy 14) two control ways: manual control and remote control Outer packing: Net weight: Indoor: 10kg, outdoor: 33kg Gross weight: Indoor: 11.5kg, outdoor: 36.Kg5 Conveyance: Qty/20' fcl: 99pcs Qty/40' fcl: 207pcs Qty/20' hq: 240pcs
Apart from manufacturing the fans for various applications, we are one of the few leading names to offer cellulose pads. We offer various types of cellulose pads like evaporative cooling pad (ecp). Made of cellulose paper, this product is engineered from cross-sectional, specially treated flute media capable of absorbing and retaining water to provide the maximum cooling efficiencies. The cellulose media is treated with stiffening and wetting agents to provide the cooling without any water carryover. These pads are designed for tropical and subtropical countries, ensures greatest performance during summer seasons. The pad media is treated with anti-rot and rigidifying resins. The media is cross-corrugated to maximize the mixing of air and water. Saturation efficiency ranging from 50 to 98%, can be achieved depending upon air velocity and depth of the cooling pad. á
Humiair offers effective, turnkey solutions with regard to Ventilation for office/factory. With a strong engineering and design Set up and efficient project management, we provide quality Services and support to ensure that you have a reliable and Efficient system commissioned on time. We provide General/forced draft ventilation system Pressurization system Balanced ventilation system Humiair misting
1. World famous brand compressor 2. Energy-saving. 3. We use tianium plated hydrophilic fins, improving the heat exchanging ratio. 4. Beautiful panel design. Full of decoration.
Model:jh18ap-10bd Product name: inverter evaporative air cooler Feature:airflow from bottom, 16-speed, made of plastic. Airflow:18000m3/h Air pressure:200pa Power supply:220v/50hz Power consumption:1.1kw Exterior size:1100x1100x950mm Wind exit size:642x642mm Fan type:axial Noise: ¿¬48-73 db(a) Effective area:100-150m2 Exterior size:1100x1100x950mm Wind exit size:642x642mm
Swamp cooler Product name:evaporative air cooler Feature:airflow from bottom, 1-speed, made of metal. Airflow:30000m3/h Air pressure:300pa Power supply:380v/50hz Power consumption:3.0kw Exterior size:1300x1260x1460mm Wind exit size:760x760mm Fan type:axial Noise: 80 db(a) Effective area:200-250¼o Exterior size:1300x1260x1460mm Wind exit size:760x760mm
1. Mobile evaporative air conditioner 2. 18000cmh big airflow 3. Save energy and ensure durability 4. Super energy saving than normal a/c Dimension:1100*1100*1580mm Vent : 950*500mm Water tank : 30l Water use : 15-20l/h Airflow:18000cmh Pressure:180pa Cover area:100-150m2 Noise:73db Fan type: axial Power:1.1kw
