Coldroom Evaporater Chiller Air Cooler
Coldroom Condensing Unit
Coldroom condenser
TI UNIT compact roof top chiller units are manufactured in type of air cooled in capacities of 5 to 360T.R. in one to four circuited configurations. In all TI UNIT compact roof-top chiller units the frames and body are from galvanized steel & stainless steel (316l) (option) the chassis made steel channel in appropriate thicknesses and all of units are completely painted in the proper thickness. Evaporators are high efficiency shell and tube heat exchangers, designed based on TEMA. Condenser of compact rooftop chiller unit made of plated coil, designed based on TEMA. Chillers with plate type heat exchangers are available upon request. TI UNIT compact roof top chillers can be designed to operate with R-22, R-407C and R-134a refrigerants. Safety controls installed on all units include high, oil and low pressure cut-outs, compressor safety cut-out, water anti freeze thermostat, water flow switch and evaporator entering water thermostat and compressor operation time logger. The above mentioned are all chosen from the most recognized controls manufactures in the air conditioning industry. Automatic condensing temperature control: A controller, factory installed on each unit automatically stages the condenser fans allowing the unit to start. With this controller the condenser fans start stage by stage. Raw materials such as copper tubes, fittings and valves are supplied by well-respected manufacturers. Electrical safety measures such as three phase controller and circuit breakers are, available on all units. A fault detection system for the whole unit is available upon request. Microprocessor based PLC controller is also available as needed. Suitable accessories make the chillers operable in all seasons according to the application requirements without any problems.
TI UNIT screw chillers are manufactured in two types of air cooled and water cooled in capacities from 50 to 560 T.R. in one to four circuited configurations. Evaporators and condenser Chillers with plate type heat exchangers are available upon request. For further related technical information, please send your inquiries to TI UNIT mfg. group. TI UNIT screw chillers can be designed to operate with R-22 and R-134a refrigerants. Bitzer screw compressors suitable for use with R-134a refrigerant are available in two versions (m.vr.1 & m.vr.2) which can be used in the chillers as required. Safety controls installed on all units include high and low pressure cut-outs, compressor oil level control safety cut-out, water anti freeze thermostat, water flow switch and evaporator entering water thermostat and compressor operation time logger. The above mentioned are all chosen from the most recognized controls manufactures in the air conditioning industry. Compressors are by Bitzer which happens to be one of the best and most reliable brands. Raw materials such as copper tubes, fittings and valves are supplied by well-respected manufactures. Electrical safety measures such as three phase controller and circuit breakers, are available on all units. A fault detection system for the whole unit is available upon request. Microprocessor based PLC controller is also available as needed. TI UNIT screw chillers are also available upon request for industrial applications in both Air Cooled and Water Cooled types; Suitable accessories make the chillers operable in all seasons according to the application requirements without any problems.
TI UNITS Reciprocating Water Chillers are available in two types of air cooled and water cooled in capacity range of 5 to 240 tons of refrigeration and compressor configurations of one to four. Evaporators and condensers are high efficiency shell and tube heat exchangers designed based on TEMA (Tubular Exchanger Manufacturers Association) standards. Safety controls installed on all units include high and low pressure cut-outs, compressor oil pressure safety cut-out, water anti freeze thermostat, water flow switch and evaporator entering water thermostat. Whatever mentioned above, are all chosen from the most recognized controls manufacturers in the air conditioning industry. Compressors are by DWM COPELAND and BITZER which happens to be one of the best and the most reliable brands. Raw materials such as copper tubes, fittings and valves are supplied by well respected manufactures. Electrical safety measures such as three phase controller and circuit breakers are available on all units. A fault detection system for the whole unit is available upon request. Microprocessor based PLC controller is also available as needed.
In all TI UNIT air handling units the frames are from aluminum profiles while the chassis and body panels are made from galvanized steel sheets in appropriate thicknesses. All units are completely painted in the proper thickness. Blower(S): Double width-double inlet centrifugal fans with forward curved blades are normally used for low pressure drop requirements as opposed to fans with backward curved blades which are for high pressure drop applications. Fans and housings are made of galvanized steel each set off a plus other related components such as shafts are statically and dynamically balanced, shafts are selected from proper material and size. Other power transmission components such as pulleys and belts are also suit ably chosen depending on the required fan speed and electric motor power. Fan(s) and the corresponding electric motor(s) are installed on an independent chassis which is itself installed on the main chassis using vibration dampers in order to eliminate transfer of vibrations to the structure. To further reduce the effects of vibrations, fan outlet (s) are also connected to the structure via flexible material such as canvous. All 380V/3/50Hz electric motors are selected with insulation class of (f) and ingress protection of (IP- 54). Electric motors with ingress protection of (IP- 55) are also available upon request. Coil (S): Cooling and heating coils or either one of the two depending on the Requirement May be installed. Cooling coils are available in two, types of chilled water and direct expansion (D.X.) as per clients requirements. The chilled water coils are constructed of 5/8 O.D copper tubes plate finned (8, 10, 12 or 14 FPI) in aluminum or copper upon request. The D.X. Coils are constructed of 3/8 OD copper tubes also plate finned (10, 12 or 14 FPI) in aluminum or copper as required. The chilled water for cooling coils in to be supplied by a water chiller and in the D.X. coils cooling is provided through the use of refrigerant such as R-22, R-407c or R-134a. Chilled water coils may be requested in 4 or 6 rows and as to the D.X. coils, they are available in 4 or 6 row configurations. Heating coils are available in two types of hot water and steam. The hot water coil similar to chilled water coil is offered in 1 or 2 row configurations. Steam heating coils are constructed of 1/2 seamless steel pipe spiral finned in aluminum or copper. Coils in 1 & 2 -row configurations are available upon request. Mixing box: Fresh and return air streams are mixed in the mixing box .An independent air damper is included for each air stream. Air Dampers are manufactured from aluminum in opposed blade configuration and are air sealed through the use of rubber strip gasket. Damper actuators ma y be easily installed when required. Washable aluminum filter modules 2 inches in thickness are arranged in (V) type configuration inside these boxes. Housing for
size: od38, id18, h1.5mm(tolerance pls contact us for sure) shape: donut, ring(do you want to see photo?) application: baby milk warming cup (portable warming cup) sample: available This is a hot model,many companies are developing the warming cup with this heater!
Wall mounted stands for air conditoner
Heat pump
Air cooler
Who Is Moly Air Cooler Company MOLY is a professional air cooler manufacturer who is focused on the researching and producing of top quality evaporative air coolers. We have the original molds for the air cooler parts, we use all is the highest quality materials. The professional team has more than 10 years experience in air cooler industry. We focused on every parts quality and details of the air cooler. WHY YOU SHOULD CHOOSE MOLY AIR COOLER Our team has many years of experience researching and producing of evaporative air coolers. We understand that every market has specific requirements and we always provide the products suitable for each market. We believe in building long-term relationships with clients based upon high-quality products and wonderful service.
aizhou Muli Envrionmental Protection Technology Co.,LTD We are professional air cooler manufacturer from China, we use the highest quality material, we produce the top quality air coolers, we offer the best price . Our major products are industrial air cooler : 1.1kw 3 phase 380V -415V single speed , 1.1kw 1 phase 220V -240V single speed, 1.1kw 3 phase 220V -240V variable speeds with frequency inverter controller. 1.5kw 3 phase 380V -415V single speed, 1.5kw 3 phase 220V -240V variable speeds with frequency inverter, 3.0kw 3 phase 380V -415V single speed, 3.0kw 3 phase 220V -240V variable speeds with frequency inverter Frequency : 50hz -60hz Portable air cooler : 3500m3/h, 5500m3/h, 7500m3/h, View File View File Moly air coolers exported to many countries. poland, portugal, spain, greece, afghanistan, pakistan, philippines, Manila, kazakhstan, Korea, cambodia,qatar, malaysia, mongolia, bangladesh, myanmar , srilanka , thailand, turkey , uzbekistan, singapore, syria , iran, iraq,israel, india , indonesia, jordan, vietnam,brazil, algeria ,egypt , nigeria, sudan, australia , etc. Taizhou Muli Environmental protection Technology CO.,LTD offers premium quality Moly 1.1kw 1.5kw 3kw 18000 Cmh 20000m3/h 30000m3/h Big Facyory Industrial Commercial Air Coolers for B2B importers and distributors worldwide. Taizhou Muli Environmental protection Technology CO.,LTD is located in China and deals exclusively in the production and export of Industrial Air Conditioners.
Feature Air process heaters are powerful hot air units used in industrial and commercial processes. Air process heaters work via a range of different air flows and air pressures depending on what is needed for the application. Air process heaters generate hot air up to 650 �ºC with infinite control by varying the voltage and/or the air velocity. Air process heaters also have a greater efficiency and are eco-friendly compared to similar products. Air process heaters can operate at high temperatures and are a safe and robust option for these conditions, unlike fuel or combustion heaters. WNH Heating can custom design an air process heater to suit your requirements. Construction Aluminium or stainless steel body with brass or stainless steel fittings. Wide range of customisable options: sizes, styles, air flow, pressure rating, thermocouple, 230â??V or 120â??V. Smaller units are fitted with a tubing â??Tâ?? with fiberglass power lead outlet. Large units are supplied with screw and nut terminals within an enclosure. Application Typically used for: Precise heating for baking and drying products. Perfect heat and air control to activate adhesive for laminating and sealing. Consistent hot air for plastic welding and soldering. Pre-heating products and equipment for production.
Industrial Carpet Dehumidifier Machine Diepanzer dehumidifiers have a maximum dehumidification capacity of 21 liters per day at an evacuated air flow of 260 m�³ / hour. Semi-professional construction and carpet dryer machine has a digital hygrostat and humidity control panel to facilitate use and save electricity.Diepanzer dehumidifier machines have a solid metal housing. In addition, thanks to the wheels located at the bottom, it allows it to be moved to a different place quickly and easily.There is a practical mechanism on the back of the carpet dehumidifier machine for attaching the safe power cable. Industrial Carpet Dehumidifier Machine Performance Features: Rotation compressor Hot gas defrost mode Digital hygrostat and humidity control Warning lights Easily accessible air filter, easy to clean Single stage fan Connection option for external condensate drain Portability: there are wheels under the device that can move in all directions
SunGreen Evaporative Coolers specifications - 18000m3h @free throw. 1.1KW, 220V, 50Hz. Cellulose cooling pads, efficient axial flow fans, Durable GI / Aluminium / Stainless Steel construction. Rugged metal body in a material of your choice depending on your requirement. Available in custom colours. Can be wall, roof or table mounted. With or without water storage tank.
Aolan 2021 new type mini air cooling & heating together type, desk type, private use
Model Number:CAD662DF-400A Brand Name:Ovartech Product name:On-board charger DIMENSIONS:263x184x119mm Weight:9KG Input Voltage:85-265VDC Output Voltage:200-420VDC Application:Electric Vehicles IP Grade:IP67 Efficiency:95% Operating temperature:- 40 to 85
Holtop is the leading manufacturer in China professionally producing heat and energy recovery ventilator, plate and rotary heat exchanger, air handling unit and other HVAC products.
Therapeutic Product for COVID-19 Patients. Recommended pertain to adult and paediatric patients with ARDS who are treated with non-invasive or high-flow oxygen systems. The BiPAP non-invasive VENTILATOR is suitable for medical institutions and home for cardiopulmonary resuscitation respiratory support. Acute respiratory failure caused by various reasons or incomplete oxygenation dysfunction, carbon dioxide retention, post- operation respiratory support, other respiratory treatment. Our partners products are officially recognized at the international level, which is confirmed by the required certification. Ventilators have undergone all needed testing and we have all test reports required. At the production stage, ventilator pass a thorough quality control check at every stage.
