36kw KCH-36 High temperature dehumidifier heat pump dryer
1) Energy saving & Environmental protection
2) Running Stable, operating easily
3) Exactly control temperature between 30-75.
4) Safe and reliable operation, automatic intelligent control, 24-hour continuous.
5) low cost, No any waste and CO2 emission
6) Easy installation.
1) Energy saving & Environmental protection
2) Running Stable, operating easily
3) Exactly control temperature between 30-75.
4) Safe and reliable operation, automatic intelligent control, 24-hour continuous.
5) low cost, No any waste and CO2 emission
6) Easy installation.
40kw BCH-40 new technology heat pump dryer
1) Energy saving & Environmental protection
2) Running Stable, operating easily
3) Exactly control temperature between 30-75.
4) Safe and reliable operation, automatic intelligent control, 24-hour continuous.
5) low cost, No any waste and CO2 emission
80kw SKXF-080CII water source heat pump WSHP air conditioner
1) International famous brand hermetic scroll compressors
2) Multi-purpose: with cooling,heating, central hot water three function.
3) High efficiency up to 5.0, low maintenance cost.
4) Quiet, no exposed equipment outdoors, No open flame, No Noise
5) Adopts advanced microcomputer control system and advance thorough security system to ensure the efficient operation all year round.
OPTIONAL:
Galvanized metal cabinet or stainless steel cabinet all available
Refrigerant: R22 and R407C and R410a
60kw SKXF-060CII water source heat pump WSHP R407c R410 R22
1) International famous brand hermetic scroll compressors
2) Multi-purpose: with cooling,heating, central hot water three function.
3) High efficiency up to 5.0, low maintenance cost.
4) Quiet, no exposed equipment outdoors, No open flame, No Noise
5) Adopts advanced microcomputer control system and advance thorough security system to ensure the efficient operation all year round.
OPTIONAL:
Galvanized metal cabinet or stainless steel cabinet all available
Refrigerant: R22 and R407C and R410a
3346 Heating Air Conditioner Ventilation Suppliers
Short on time? Let Heating Air Conditioner Ventilation sellers contact you.
Ground Source Heat Pump 5P SFXKR-017II
1) International famous brand hermetic scroll compressors
2) Multi-purpose: with cooling,heating, central hot water three function.
3) High efficiency up to 5.0, low maintenance cost.
4) Quiet, no exposed equipment outdoors, No open flame, No Noise
5) Adopts advanced microcomputer control system and advance thorough security system to ensure the efficient operation all year round.
OPTIONAL:
Galvanized metal cabinet or stainless steel cabinet all available
Refrigerant: R22 and R407C and R410a
Whitenair Technologies is a Leading Manufacturer of HVAC ( Heating Ventilation& Air Conditioning) system ,We create and Implement innovative and technologically advanced solution for all types of Industrial facilities and commercial institutions.
Our Air Handling units guarantee comfort regardless of a facilitys location. We are real experts in Good Climate��.. and Good IAQ ( Indoor air quality)
Whitenair Air Handling Units are designed with the use of state of the art technologies, advanced material engineering ,and completely innovative construction solutions hence whitenair AHUs are reliable, Energy saving and fully adjusted to the expectation of market .
We care for quality on all stages of work with the product starting from AHU design through production to service assistance. We make sure that our AH are always assembled by highly qualified services. Assembly is included as standard and we are responsible for performing services of highest quality possible
The purpose of animal feed drying is to remove the excess water from the feed stock for easy to pack, transport, store, process and use.
In view of the animal feed is high humid and viscous, we designed Rotary Harrow Rolling Triple Stage & Multiple-loop Drying Equipment. It uses unique design concept and truly energy saving technology. With the 1 + 3 = 6 three cylinders technology, 3 * 6 = 36 S Type material moving processes, 6 - 3 = 1 fast air exhausting way and Moving forward 3 steps and backward 2 Reciprocating drying method, the dryer operating like a Smart Robot. In the operation of moving forward, backward, directing, conversing, raising, turning, the material contacts with the hot air efficiently, thereby being dried quickly and evenly. Dry material will be discharged into star type unloader, then unload on conveyor for next operation (mixing, cooling and package). The whole process is automatically and controlled by PLC. Equipment operation only need 1-2 people per shift.
This drying equipment can also be used for drying forage, distillers grain, cassave residues/pulp, corn pulp, potato dregs, soy sauce residue, soybean wastes, fruit pomace, zymophyte dregs etc. The finished production is very good raw material of organic feed for animals.
The electroplating sludge contains lots of heavy metal which is harmful to environment and health. It is banned to landfill or dump directly. So it is necessary to dry firstly. Whats more, some plating sludge have precious metal, after drying it can be recycle and use.
We use advanced triple pass rotary drum multiple-loops drying technology, which can dry sludge below 10% moisture content. Nowadays, above 90 % electroplating factories use ZJN Drying Equipment in China for electroplating sludge.
We have over 20-year drying machine manufacturing experience, specialized in customizing the most energy saving and efficient dryers.
â? The energy recovery exchanger is washable PSY material different from aluminum or paper materials on the market, it has high ebergy recovery efficiency
â?¡The real test "0"PM 2.5 extremely pure air, european standard H I 3 high efficiency â?¥ 99.97%
â?¢It is super thin which thickness=18.7~26cm
â?£its volume about 150-50000m3/h and the efficiency varies with the volume, Basically around 87 percent.
With the combination of liquid transport thermal dissipation module and vapor chamber technique, this aluminum vapor chamber heat sink is ideal for devices require more uniform heat spreading. With two ends liquid tube, each tube having a first end linked with the pipe is to connect with external heat-dissipating block which is disposed on the heat source to form a fluid loop. Kaixin aluminum is a professional heat sink provider offering one-stop comprehensive thermal solutions to customer worldwide.
Model NO.: KX-0101
Material: Alu 6063-T5/6060-T6 as specification
Machining Process: Drilling, sealing ring, Friction stir welding, Vacuum brazing
Size: customized size
Manufacturer label: OEM available
We are a professional manufacturer dedicated in the heat sink production for over 15 years. The heat sinks we produced including power radiator, resistance radiator, frequency converter radiator, inverter radiator, power amplifier radiator, semiconductor radiator, chassis integrated radiator, plug-in chip radiator, LED radiator, forked finger radiator, chassis housing radiator, sunflower radiator, Solite state relay heat sink etc. We also can provide the best thermal solution for our customers.
Model No.: KX-0102
Material: AA6063-T5/T6ï¼? AA6060ï¼? AA7005
Specification: Customized
Surface Treatment: Powder Coating/Anodize/Brush/Polish/Zinc Coating/Electroplate
Service: OEM
Application: electric appliance
black rubber foam pipe for air condition for sale
FOB Reference Price:Get Latest Price
US$180,00 - US$280,00 / Cubic Meters | 50 Cubic Meter/Cubic Meters (Min. Order)
Lead Time:
Quantity(Cubic Meters) 1 - 50 >50
Est. Time(days) 7 Negotiable
Customization:
Customized logo (Min. Order: 50 Cubic Meters)
Customized packaging (Min. Order: 50 Cubic Meters) More
Contact Supplier
Leave Messages
Payment:
More
Shipping:
Alibaba.com Ocean Shipping Service from China to U.SGet shipping quote
Overview
Quick Details
Place of Origin:
Hebei, China (Mainland)
Brand Name:
PANZHU WRAP
Model Number:
rf-p
Packaging & Delivery
Lead Time :
Quantity(Cubic Meters) 1 - 50 >50
Est. Time(days) 7 To be negotiated
Product feature of the Thermal Insulation Rubber Foam
Commonly found in on highway trucks, charge air coolers are a very important component of the overall cooling system. Utilizing rammed air, charge air coolers supply a denser boost and inlet temperatures before entering the engine.
At Zhifa, we common use plate and bar construction for increased strength and performance but not restricted to. We can also supply tube and fin as an option and cores only can be manufactured should manifolds not be available in our range.
Description
Aerogel Insulation Felt/Panel is made of nano-silica aerogel as the main material and combined with glass fiber cotton or pre-oxidized fiber mat by special process.It is characterized by low thermal conductivity,certain tensile and compressive strength,and is a new type of thermal insulation material.
Specification
Model SACB-0-3 SACB-0-6 SACB-0-10
Thickness(mm) 3 6 10
Width(mm) 1400/1500(customizable)
Color White
Permitted useful temperature range(°C) -200~650 -200~650 Fiberglass composite: -200~650
Ceramic fiber composite: 600~1000
Density(kg/m³) 200±20 200±20 200±20
Linear expansivity 4.2Ã?10-6
Dimensional stability(max) 1% Test method GB/T 8811-2008
Compressive property (min),kpa,@10% 60 Test method GB/T 13480-2014
(min),kpa,@25% 120 Test method GB/T 13480-2014
Burning behavior A1 Test method GB/T 20285-2006
The smoke performance level SR-2
Drip content level ST-2
Smoke toxicity of the FED's value,(max) 0.1
Corrosion resistance pass Test method GB/T 3810.1-2006
Hydrophobicity,(%) >99.8 Test method GB/T 10299-2011
Tensile strength(min),(kpa) Fiberglass composite: 100
Ceramic fiber composite: 80 Test method GB/T 17911-2011
Remarks : Silica aerogel fiberglass and ceramic fiber technical parameters
Advantages
--Lower thermal conductivity coefficient
Thermal conductivity coefficient less than 0.016w/(m,k)at room temperature,
several times or even dozens of times lower than traditional heat preservation materials, and with better heat preservation effect.
--Thinnest and lightest thermal insulating material
Under the same heat preservation effect, the dosage of our companys SiO2 aerogel composite material is only 1/5 to 1/3 of traditional materials . So it can be applied to dense pipeline and narrow space and achieve a good effect of heat or cold preservation. And greatly convenient for installation and save the cost of the protective layer.
--Water-proof and moisture-proofï¼?easy to store
It is hydrophobic and porous with hydrophobicity of 99%.
Application
Construction: Interior and extrior wall, door, floor, ceiling, roof, partitions, fireproof door
Cold Storage: fridge, freezer, refrigerators, cold storage, medical incubator, blood bank, medicine box, refrigerated container.
Veicle: Engine heat shield, catalytic exhaust pipe
Aerospace: Engine, black box
Building materials industry furnace: All types industry kiln, including rotary kiln, shuttle kiln, roasted kiln
Metallurgy: torpedo tank, steel ladle, tundish, coke oven door
Machinery: industrial stove, electric stove, stove door, stove cover
Instrumentation: stove temperature tracker, heat accumulator, data record protection, electric ceramic stove.
Feature
It has the thermal insulation performance and surface hydrophobicity and excellent flame retardant properties.
Laswim residential standard on/off heat pump is specially designed for energy efficient pool heating, it extracts the talent heat in the air and transfers into the pool water, which helps to extend the swimming season with minimum cost. With a COP as high as 5.9, this standard on/off heat pump offers over 5 times heat power than electrical power input.
Features:
1. COP up to 5.9, over 5 times saving
With a COP as high as 5.9, standard on/off heat pump offers over 5 times heat power than electrical power input. Giving you exceptional performance at the minimum running cost.
2. Hot gas defrosting
With Saginomiya 4-way valve, standard on/off heat pump can automatically and efficiently deforst by hot gas.
3. Plug & Play for easy installation (Optional)
Standard on/off heat pump can be fitted with plug and play which makes installation easy and less expensive.
4. Titanium heat exchanger
Standard on/off heat pump adopts 100% titanium heat exchanger, it is excellent for all common pool chemical systems including chlorine and salt water.
5. Down to 0 running
6. Quiet operation
7. Simple LED digital controller
8. Silver welding for reliable refrigerant system
Applications:
Indoor or outdoor pools
Endless pool
Hot srping /SPA
Technical parameters:
Air 27/Water 27/Humidity 80%
1. Heating capacity: 9.9kW
2. COP: 5.8
Air 15/Water 26/Humidity 80%
3. Heating capacity: 7.1kW
4. COP: 4.2
5. Advised pool volume: 30~45m³
6. Operating temperature: 0~43
7. Rated input power: 1.6kW
8. Rated input current: 7.4A
9. Power supply: 230V/1N/50Hz
10. Heat exchanger: Titanium
11. Refrigerant: R32
12. Casing: ABS material
13. Advised water flow: 4~6 m³/h
14. Water connection: 50mm
15. Net weight: 54.8kg
16. Net dimension: 961x312x658
Laswim swimming pool heat pumps are specifically designed to economically provide heating to high activity and larger pools such as those in camp sites, leisure parks, hotels etc. Heat pumps are recognised as the most sustainable way to dynamically heat swimming pool water and with a heat pump you will save both energy and operating costs. Laswim heat pumps are available for seasonal use during typical outdoor pool usage periods or for indoor pool, all year round enjoyment.
Features:
1. Premium materials and components, providing great stability, high efficiency and long life time;
2. Compact and easy for installation, can be installed outside or in a plant room.
3. Safe and reliable, the electricity does not heat the pool directly, it is completely separated from the water, greatly improving the safety of swimmers and employees.
4. High efficiency and energy saving. The unit requires only a small amount of electricity can be converted into 3-4 times of heat to the water, high energy conversion rate, significant savings in operating costs.
5. Super corrosion resistance and durable, excellent anti-corrosion galvanized steel sheet panel and titanium in PVC heat exchanger, ensure the main components in contact with the swimming pool can effectively resist the erosion of chloride ion in water.
6. Intelligent control, temperature control system of heat pump can accurately monitor the water temperature, keep the water temperature close to the set temperature, to achieve the purpose of constant temperature.
7. Multiple and careful protection to ensure safety and long life time.
Applications:
* Indoor or outdoor pools
* Water parks
* Hotel pools
* Holiday parks and campsites
Technical parameters:
Air 20/Water 26
1. Heating capacity: 40.18kW
2. COP: 4.8
Air 7/Water 26
3. Heating capacity: 27.87kW
4. COP: 3.7
5. Cooling capacity: 26.78kW
6. COP: 3.2
5. Advised pool volume: 60~150m³
6. Operating temperature: 0~43
7. Rated input power: 8.37kW
8. Rated input current: 14.96A
9. Power supply: 380V/3N/50Hz
10. Heat exchanger: Titanium
11. Refrigerant: R410A
12. Casing: Galvanized steel
13. Advised water flow: 10 m³/h
14. Water connection: 50mm
15. Net weight: 280kg
16. Net dimension: 1425x745x1045
Inverter technology makes swimming pool heat pump achieve an extremely high COP.
With variable running speed basing on actual heating or cooling requirements, when
pool temperature is getting close to setpoint, it heats up the pools at lower speed which
offers higher COP and quieter operation. Laswim DC inverter heat pump helps to save
big running cost and provides a conformable swimming environment.
Features:
1. COP up to 11
No matter its cold or warm, it will adjust the heating capacity according to the pool water. When running at 20%-25% speed, it reaches the highest COP 11.
2. Super energy saving
With low-speed running, DC inverter heat pump is double
energy saving than traditional on/off heat pump.
3. Silent operation
Thanks to the stable DC inverter control system, DC inverter compressor and variable speed ventilator, Laswim DC inverter heat pump runs very silently and provides you a comfortable swimming environment.
4. Smart WIFI App control (Optional)
With smart APP control, you can check and control your heat pump anytime and anywhere, all information is at your fingertips.
5. EEV technology
10 times flexibility to adjust the gas flow and increase COP by up to 20%.
6. Wide voltage
Self-adjustment to fit in unstable power supply, therefore voltage range can be 180~260V.
7. Hot gas defrosting
With Saginomiya 4-way valve for quick & efficient defrosting.
8. Twisted titanium heat exchanger
40% higher efficiency than normal titanium heat exchanger.
9. Soft starter
Start from 0 Amps to rated Amps steadily. No rush to house electricity system.
10. 0~43 application temperature.
Applications:
Residential indoor or outdoor pools
Endless pool
Other applications of small size
Technical parameters:
Air 27/Water 27/Humidity 80%
1. Heating capacity 9.4kW
2. COP range: 10.4~5.5
Air 15/Water 26/Humidity 80%
3. Heating capacity 6.9kW
4. COP range: 6.5~4.3
5. Advised pool volume: 25~50m³
6. Operating temperature: 0~43
7. Casing: ABS material
8. Heat exchanger: Titanium
9. Refrigerant: R32
10. Power supply: 230V/1N/50Hz
11. Rated input power: 0.32~1.67
12. Input power at 50% speed: 0.57kW
13. Rated input current: 1.47~7.58
14. Advised water flow: 3~5m³/h
15. Water connection: 50mm
16. Net weight: 48.2kg
17. Net dimension: 872x349x654mm
Product Description
Solar Power Air Conditioner Construction Worker Helmet Safety
Product Feature
â?? 80mm Diameter Fan, Strong wind cooling.
â?? 1W Solar Panel, Keep Fan Working over 8 Hours and Charging Li-on Battery under Sunshine.
â?? 6000mAh Li-on Battery, Keep Fan working over 48 Hours or Phone Charging.
â?? Ultra Sright Solar1W LED Flashlight, Send SOS Message in Emergencies.
â?? Red Taillights to Protect Workers at Night.
â?? Sensitive Compass and Thermometer.
â?? High Quality ABS Raw Material.
â?? Application: Mining, Oil & Gas, Construction, Utilities, Forestry, Chemical, Pharmaceutical, Aerospace, and Manufacturing etc.
â?? Package: PE/Carton, or Customized.
â?? OEM/ODM is available, we are able to make the sample and mass produce the cable according to your requests or drawings.
If you have good idea and project, please you contact us, thanks!
3346 Heating Air Conditioner Ventilation Suppliers
Short on time? Let Heating Air Conditioner Ventilation sellers contact you.
