This Flooded Water-Cooled Screw Chiller has a compact structure which makes it easy to install and maintain. It is equipped with several smart features, for instance, intelligent control which helps it to maintain energy efficiency at any instant. Furthermore, it has an evaporator with full liquid design. Not only it takes a microcomputer control system, but it also has a fault diagnosis. Looking for a Chiller which has reliable functioning and remarkable performance, then look no more this Chiller is your right answer. Key Features: Advanced 5:6 tooth ratio Multi-level or stepless energy settings Smart control Strong security protection Fault diagnosis Automatic adaptation Level sensor Low noise Efficient unit Power supply: 380V/3PH/50Hz Applications: Our Flooded Water-Cooled Screw Chillers has a vast range of applications in several sectors from food to plastics. It also ensures that your requirements are met by it.
Water-Cooled Falling-film Screw Chiller comes with a third-generation premium efficiency. It is hosted with a 5:6 asymmetrical toothed screw. One of its remarkable features is dual compressor design which makes it a reliable unit. In addition to this, it has electronic valve expansion which makes sure of precise refrigerant flow in any condition. The eject pump recommended with it. Key Features: â?? Advanced 5:6 tooth ratio â?? Falling-film evaporator â?? In accordance with environmental requirements â?? Dual Compressor design â?? Ejector pump â?? Dependable Oil management system â?? Electronic Expansion â?? Level sensor â?? Low noise â?? Efficient unit â?? Power supply: 380V/3PH/50Hz
1. Introduction to 10 Ton Water Cooled Chiller Water-cooled chillers are essential equipment in various industrial sectors, providing efficient and reliable cooling solutions for large-scale applications. A 10-ton water-cooled chiller refers to a cooling system capable of removing 10 tons of heat per hour from a process or space. This technology is vital in industries requiring precise temperature control, such as food processing, pharmaceuticals, plastics, and HVAC systems. In this article, we will explore the critical features of a 10-ton water-cooled chiller, including its components, applications, advantages, and installation requirements. We will also address the factors to consider when selecting a chiller and discuss maintenance tips to ensure optimal performance and longevity. 2. Understanding the Basics of a 10 Ton Water Cooled Chiller 2.1 Definition and Capacity of a 10-Ton Chiller A chiller's "tonnage" refers to its cooling capacity, with one ton equal to the ability to remove 12,000 BTUs (British Thermal Units) of heat per hour. Therefore, a 10-ton water-cooled chiller can remove 120,000 BTUs of heat per hour. This capacity makes it suitable for medium to large-scale cooling needs in various industrial settings. 2.2 How Water-Cooled Chillers Work Water-cooled chillers function by utilizing water to absorb heat from a process or environment. The chiller's refrigerant system circulates through a compressor, evaporator, condenser, and expansion valve. The evaporator cools the water, which is then circulated through the system to absorb heat. The heated water is sent to the cooling tower, where the heat is dissipated into the atmosphere, and the cycle repeats.
Used air conditioner G/L, SAMSUNG, Brand good condition , BTU 8000, ,12500 , 14500 , 17000 , 20000 , PRICE UP SINCE $160
Kendall is a supplier of air-cooled two-stage piston condensing units. These units are designed to provide reliable and efficient cooling for a variety of applications, including commercial refrigeration, HVAC systems, and industrial processes. Air-cooled two-stage piston condensing units are highly efficient and reliable refrigeration systems used in a variety of applications. The cost of these units can vary depending on several factors, but they offer significant advantages over other types of refrigeration systems. FAQs 1. What is an air-cooled two-stage piston condensing unit? An air-cooled two-stage piston condensing unit is a refrigeration system that uses two compression stages for improved efficiency and cooling capacity. It features air-cooled condensers and piston compressors, ideal for low-temperature applications like freezing and industrial refrigeration. 2. What are the advantages of using an air-cooled two-stage piston condensing unit? Advantages of using an air-cooled two-stage piston condensing unit include higher energy efficiency, enhanced cooling capacity, and reliable performance in low-temperature applications. These units offer better temperature control, and reduced energy consumption, and are suitable for industrial and commercial refrigeration needs. They are highly efficient and reliable, with lower operating costs and longer service life. They also require less maintenance and are easier to install than water-cooled systems. 3. What applications are air-cooled two-stage piston condensing units used for? Air-cooled two-stage piston condensing units are used in applications such as industrial refrigeration, cold storage, food processing, and low-temperature freezing. They are ideal for environments requiring precise temperature control and efficient cooling, such as supermarkets, warehouses, and pharmaceutical storage facilities. 4. How much do air-cooled two-stage piston condensing units cost? The cost of an air-cooled two-stage piston condensing unit can vary depending on several factors, such as the size of the unit, the brand, and the features. Generally, these units range in price from a few thousand dollars to tens of thousands of dollars.
At Kendall, we pride ourselves on delivering top-tier cold storage solutions designed to meet the diverse needs of our clients. Our extensive range of equipment ensures optimal performance, reliability, and efficiency in various applications. Among our standout offerings are the Water-cooled Screw Condensing Units, engineered to provide exceptional cooling capabilities for a wide range of temperature requirements. These units are perfect for businesses seeking robust and reliable cooling solutions tailored to their specific needs. Specifications Semi-Hermetic Low-Temperature Storage Screw Condensing Unit (-20~-15): Designed for low-temperature storage applications, this unit ensures stable and efficient cooling in demanding conditions. It is ideal for cold storage facilities that require precise temperature control, such as food processing plants, pharmaceutical storage, and chemical processing industries. Semi-Hermetic Water Cooled Screw Compressor Unit (-5~5): The unit is perfect for medium-temperature applications, providing consistent cooling performance. Suitable for a variety of uses, including refrigerated warehouses, beverage storage, and dairy processing, it ensures products are kept at optimal conditions to maintain their quality and safety. Semi-Hermetic Water Cooled Screw Compressor Rack (-5~5): Featuring multiple compressors in a single rack, this system offers enhanced reliability and flexibility. It's ideal for large-scale operations where redundancy and scalability are critical, such as in logistics centers and large food distribution hubs. Semi-Hermetic Water Cooled Screw Compressor Unit Top Quality (-20~-15): The premium unit is engineered for superior performance and durability in extremely low-temperature environments. It is perfect for applications requiring rigorous temperature control, such as deep freeze storage facilities and specialized industrial processes. Why Choose Kendall's Water-cooled Screw Condensing Units? Engineering: Our units are designed with cutting-edge technology to ensure optimal performance and energy efficiency. The semi-hermetic design reduces the risk of refrigerant leakage, enhancing operational reliability. Quality Assurance: Each unit undergoes rigorous testing to ensure it meets our stringent quality criteria. Comprehensive Support: From initial consultation to installation and ongoing maintenance, Kendall offers comprehensive support to ensure your cold storage solutions perform flawlessly. Our team of experts is always on hand to provide guidance and technical assistance.
The cooling tower fan is located at the top of the cooling tower, which is directly connected with the motor or indirectly connected with the gearbox and pulley. The fan draws the hot air in the cooling tower after heat exchange from the top and guides the low-temperature air to enter from the air inlet of the bottom cooling tower. As a professional cooling tower manufacturer, we also provide plastic or FRP (fiberglass) cooling tower fans or fan blades at good prices. You can surely pick out what you need from the different types of industrial cooling tower fans below.
Closed Circuit Cooling Tower Closed circuit cooling tower (also known as an evaporative air cooler or closed cooling tower) is the tubular heat exchanger placed in the tower, through the circulation of air, spray water and circulating water heat exchange to ensure the cooling effect. AUVC not only provides different shapes of cooling towers used in industries, such as round shape cooling towers and square cooling towers, but also offers closed cooling towers and open circuit cooling towers as well. The type of closed circuit cooling tower is widely used in iron and steel metallurgy, power electronics, machining, air conditioning system and other industries. How do closed circuit cooling towers work? Closed-circuit cooling towers make it possible to separate the evaporative circuit from the process circuit (customer circuit). A stainless-steel plate heat exchanger attached to the cooling tower, in its dedicated room, allows a glycol-free operation, and a simplified and unequalled ease of maintenance. The closed circuit cooling tower works as follows On the process side to be cooled (customer loop), the water to be cooled enters a plate heat exchanger connected to the tower and is cooled and discharged. The primary loop is closed and never comes into contact with air. On the secondary side of the cooling tower, the water is sucked out of the pool by a pump and circulated through a stainless steel plate heat exchanger. The water leaving the exchanger is piped to the top of the unit. This water is graded and evenly dispersed over the exchange surfaces by dispersers (also known as water distribution nozzles). Air driven by fans (axial or centrifugal) enters from the lower part of the cooling tower, is heated and saturated with water and exits from the upper part, passing between the exchange surfaces. Under the effect of the surface tension of the filler ladder, the water spreads uniformly and flows away over the entire height of the tower. The exchange surface is thus increased. The water cooled by forced ventilation falls freely into an inclined pool located at the bottom of the unit. Types of Closed Type Cooling Tower
Cooling Tower Motors Cooling tower motor is a new type of energy-saving and environmental protection improved motor, with protection grade of IP55, insulation grade of B, and power supply voltage of 380V and 50Hz. Generally, a closed waterproof motor is used in the cooling tower, which can operate for a long time in outdoor humid and high temperature environments. The cooling tower motor material is cast iron and aluminum shell. Derived from one of the most rugged motor platforms used in the most demanding industrial applications, direct drive motors are the right solution for operation in hot and humid environments in towers. Direct drives are ideally suited for cooling towers, air-cooled condensers and air-cooled heat exchangers.
We are aircondition specialist Gharissa aircondition Supply and installation also available Do contact whatsapp +971559099472 Hisense split ac brand new 1ton 750Aed 1.5ton 1050Aed 2ton 1350Aed 2.5ton 1900Aed We have super general ac 1ton 1050aed 1.5ton 1350Aed 2ton 1650Aed 2.5ton 2550Aed 3ton 3100Aed
Apex Industries is the prominent leading Manufacturer & Exporter of finest quality Air Handling Units (Pure Air Purifier / Treated Air Ventilation System) for Pharmaceutical, Hospital, Modular Operation Theater and other all Air-conditioning applications, Our products construction heaving rigid framework for the unit comprises an assembly of externally chamfered extruded anodized aluminum profiles and nylon glass fiber corner joints, and incorporated with polyurethane foam, 25 mm / 43 mm / 50mm thick pressure injected sandwiched panels, also we makes the entire unit anti-corrosive and sweat free (thermal break). and imported self-drilling and self-tapping galvanized sheet metal screws adds to the aesthetic & more times stronger of the framework.
Smacna, DW 142-143, DIN 24-194 and TSE standards, production in all sizes and thicknesses from 0.50 mm to 1.20 mm, Internal and external Rubber-Acoustic insulation construction, Galvanized and Manufactured from stainless steel, manufactured in harmony with each other, minimum sealing in flanges and corners, full sealing with mastic after production is provided.
ZL-3 model steam air heater with upper outlet and lower inlet is consists of 9 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan + Fresh air damper + waste heat recovery device + dehumidification fan + electric control system. It is specially designed for supporting downflow drying room/heating rooms. After convert the outside steam heat to heat inside the insulation box through by the fin tube, it�´s mixing with recycle or fresh air, under the action of the fan, it is discharged from the upper outlet into the drying room or heating space. Then cooled air pass through the lower air outlet for secondary heating and continuous circulation. And when the humidity of circulating air reaches the emission standard, the dehumidification fan and fresh air damper will start simultaneously. The exhausted moisture and fresh air implement sufficient heat exchange in the waste heat recovery device, so the moisture is discharged and the fresh air with recovered heat enter the circulation system. Advantages/features 1. Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3. Stainless steel electric heating finned tube, durable 4. Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 5. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 6ï¼?High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. Integrating the dehumidification and fresh air system, heat loss is extremely small through by the waste heat recovery device. 8. Automatically replenish fresh air
ZL-2 model steam air heater with Left-Right Circulation is consists of 7 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan+ Fresh air damper + electric control system. It is specially designed to support the left and right circulation drying room. For example, the 100,000 kcal model drying room, it is equipped with 6 fans, three on the left and three on the right. When the three fans on the left rotate clockwise, the three fans on the right rotate counterclockwise in a cyclic alternating manner, forming a relay, The left and right sides serve as air inlets and outlets alternately, taking out all the heat generated by steam heater. It is equipped with an electric fresh air damper to supplement fresh air in coordination with the dehumidification system in the drying room/drying place. 1.Simple structure and easy installation 2. Large air volume and small wind temperature fluctuation 3ï¼?Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 4. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating. 7. left and right fans run alternately in cycles to ensure even heating 8. Automatically replenish fresh air
ZL-1 model Steam air heater with upper inlet and lower outlet is consists of 6 parts: steel-aluminum radiator fin tube + electric steam valve + drain valve + insulation box + fan + electric control system. Steam passes the though the fin tube, dissipating heat to the insulation box, mixing and heating the fresh or recycle air to setting temperature, fans bring this hot air into drying room or heating room to be used for dehydration, dehumidification or heating. 4. Advantages/features 1. Simple structure, beautiful appearance, low cost 2. Steel-aluminum finned tubes, high heat exchange efficiency. The base tube is made of 8163 seamless tube which is pressure-resistant and durable; 3. Electric steam valve controls the amount of inlet, automatically cuts off or opens according to the set temperature, so that can accurately controls the temperature. 4. Large air volume and small wind temperature fluctuation 5. High-density fire-resistant rock wool insulation box to avoiding heat loss 6. High temperature and high humidity resistant fan with IP54 protection rating and H-class insulation rating.
Thermoelectric cooling systems, Thermoelectric coolers, Thermoelectric cooling asssembly, Thermoelectric cooling devices, Air coolers., air cooling systems, peltier cooler Part No.: WFF-60 Rated Voltage: 12V/24V Input Current: 7.3A /3.8A Cooling Power: 60 W Size: 200*133*146.6 mm Weight: 2.6Kg Thermoelectric cooling systems, Thermoelectric coolers, Thermoelectric cooling asssembly, Thermoelectric cooling devices, Air coolers., air cooling systems, peltier cooler Part No.: WFF-150 Rated Voltage: 12V/24V Input Current: 16.5/8.2A Cooling Power: 145 /150 W Size: : 300*160*170 mm Weight: 4.5Kg Thermoelectric cooling systems, Thermoelectric coolers, Thermoelectric cooling asssembly, Thermoelectric cooling devices, Air coolers., air cooling systems, peltier coolers Part No.: WFF-200 Rated Voltage: 12V/24V Input Current: 22.4 /11.5A Cooling Power: 201/205W Size: 400*180*198 mm Weight: 7.1Kg We can provide OEM design, please do not hesitate to contact us if you have any requirement.
Kendall is a well-known professional air-cooled piston condensing unit supplier and manufacturer. They specialize in designing and producing high-quality, energy-efficient air-cooled piston condensing units for various industrial applications. Air-cooled piston condensing units are an essential part of any refrigeration system. They are responsible for removing the heat generated by the system and transferring it to the surrounding environment. This ensures that the refrigeration cycle operates at an optimal level and maintains the desired temperature within the refrigerated space. Here are some frequently asked questions about air-cooled piston condensing units: 1. What is an air-cooled piston condensing unit? An air-cooled piston condensing unit is a refrigeration system component that utilizes a compressor to compress the refrigerant gas and discharge it to the condenser. The condenser then removes the heat from the compressed refrigerant gas and transfers it to the surrounding environment using an air-cooled heat exchanger. 2. What are the benefits of using an air-cooled piston condensing unit? Air-cooled piston condensing units offer several benefits, including energy efficiency, easy installation, low maintenance requirements, and cost-effectiveness. They are also suitable for outdoor installations and do not require water for cooling. 3. What factors should be considered when selecting an air-cooled piston condensing unit? When selecting an air-cooled piston condensing unit, several factors need to be considered, such as the cooling capacity required, the ambient temperature, the refrigerant type, and the overall system design. 4. How does an air-cooled piston condensing unit work? An air-cooled piston condensing unit works by compressing the refrigerant gas using a piston compressor. The compressed gas is then discharged to the condenser, where it is cooled by the air-cooled heat exchanger. The cooled refrigerant liquid then flows through the expansion valve and evaporator, absorbing heat from the refrigerated space, and completing the refrigeration cycle.
Refrigerated Compressed Air Dryer A refrigerated compressed air dryer is a device used to remove moisture from compressed air by lowering its temperature. It is a widely used type of air dryer in various industrial applications where the presence of moisture can lead to equipment damage, corrosion, and decreased efficiency. How does a refrigerated air dryer work? Refrigerant dryers are the most commonly used dryers in the industry and consist of an air-to-air heat exchanger and an air-to-refrigerant heat exchanger. The heat exchangers remove moisture from your compressed air by condensation of water within.This is essential to protect compressed air systems and every piece of equipment fed by compressed air from the harmful effects of moisture. The most important criterion is to keep the relative humidity of compressed air below 50%. Both air-cooled and water-cooled refrigerant dryers are available. Basically, the dryers cool down the warm wet air coming from the compressor, When the temperature of compressed air reduces, moisture condenses and is drained from the compressed air with the help of a high-efficiency water separator. After that, compressed air is reheated to around room temperature so that condensation does not form on the outside of the pipe system. This heat exchange between ingoing and outgoing compressed air also reduces the temperature of the incoming compressed air, and as such reduces the required cooling capacity of the refrigerant circuit.
In a world where precision, performance, and sustainability drive industrial progress, we proudly stand as your premier provider of advanced Water Cooling Systems, more commonly referred to as chillers. With a steadfast commitment to engineering excellence and a vision for a greener tomorrow, we introduce a transformative solution that redefines the landscape of cooling technology.
FB08 Neck air cooling fan wearable our hot sale product, with high tech, air cooling pad aviation aluminum grade icy cold compress voltage: DC5V/2A, max power: 9W 4000mAh battery long lasting battery life, working: 1.5-10 hours weight: 0.32 kg, size: 187*118.5*52.5 mm 360�° wrapped around strong wind, 3 gears powerful wind, 1 gear of cold compress elastic silicone, easy to wear, can be use anywhere 3 colors: white/ royal blue/ light green, 1 year warranty, Wholesale only, exw price, exclude any additional charge, price depends on the quantity CE/FCC/RoHs Certificate, Patents MOQ: 500pcs, OEM(private logo): 1000pcs, free of charge
