Argon oxygen furnace is a kind of ladle refining furnace, which is characterized by side-blowing oxygen through the bottom tuyere with an immersion way. When the tuyere center is blown in with oxygen, argon and mixed gas of nitrogen, the proportion of argon and oxygen should be adjusted, then, it can achieve the purpose of decarburizing and retaining of chrome. Argon and nitrogen are used as cooling gas for tuyere ring to extend the life of tuyere. It can get the best operation by controlling the flow of the tuyere ring. And the flow of the tuyere center and tuyere ring can be controlled in master-control room.
Submerged arc furnace¡ait¡¡¥s also known as electric arc furnace or resistance electric furnace. It is mainly used to reducing smelting ore, carbonaceous reducing agent and solvent etc. Mainly adapts to production of ferrosilicon, ferromanganese, ferrochrome, ferrotungsten, silicon manganese alloy and other ferrous alloys, it is an important smelting furnace in metallurgical industry for production of industrial raw materials and calcium carbide and so on chemical raw materials. The working character is to use carbon or magnesia refractory materials as furnace lining, use self roasting electrode. Electrode inserts into the materials inside the furnace for submerged arc operation, using arc energy and current through the materials, and due to the resistance of the materials and produce energy to melt metal. It¡¡¥s a kind of industrial furnace which is worked continuously, charged material in succession, and tapped out metal or slag in intermittent. Capacity:3000kva-33000kva, smelting different ferroalloy by ores.
Vd/vod ladle vacuum refining process strengthens blowing argon reasonably on the bottom of furnace; it can stir molten steel adequately and get ideal dynamics effect. If combining vd and lf, the furnace can get ideal molten steel refining temperature with easy structure and low cost. Both of the above process can dehydrogenize, denitrify, desulfurize, deoxidize under vacuum conditions and get the function of vacuum oxygen decarburization (vod) to achieve the purpose of refining super pure steel. Capacity 5-100t, purpose: vacuum ladle refining
Product details Gx-qdlpseries force convection glass tempering furnace is mainly used to produce refinforced glass of high quality use as windows of vehicles, low-e glass, coate glass, print glass, architecture, aircrafts or for decoration glass. This machine works on the basis of the convection heating theory and adopts convection blower with special design, unique structure of hot air circulation and various advanced technologies as well, which greatly increase the glass heating speed. The production efficiency is increased and the quality of products is improved, especially with unparalleled advantage in processing low-e glass. This machine is applied to all kinds of gx series tempering furnace Gx-qdlpy series forced convection glass tempering furnace for flat & bend parameters Model flatmax.Size (mm) flatmin.Size (mm) bendingmax.Size (mm) bendingmin.Size (mm) min.R (mm) flat productivity(m2/h) bend productivity(batch/h) thickness (mm) installed power Kw In nude, but can packing as customer required
Construction: Steelmaking arc furnace inputs electric energy into furnace by graphite electrode. Electric arc producing between electrode tips and furnace burden is used as heat source to smelt steel. The heat source of electric arc furnace is electric energy. Atmosphere inside the furnace can be adjusted, which is helpful to melt steels containing easier oxidation of elements. Sh series three-phase steelmaking arc furnace is used to smelt high-quality carbon steel and all kinds of ferro-alloy steel. The designed volume is from 0.5-150t. And the rate power of transformer can Equipment constitution Purpose: Electric furnace transformer, short net, electrode lifting device, current conducting arm, furnace lid, furnace lid lifting and rotary device, furnace body, furnace titling device, ladle cart, water cooling system, compressed air system, hydraulic system, charging system, high voltage electric system, low voltage electric control system, basic automation and computer control system. Main parameter and chosen type Container
Construction: Steelmaking arc furnace inputs electric energy into furnace by graphite electrode. Electric arc producing between electrode tips and furnace burden is used as heat source to smelt steel. The heat source of electric arc furnace is electric energy. Atmosphere inside the furnace can be adjusted, which is helpful to melt steels containing easier oxidation of elements. Sh series three-phase steelmaking arc furnace is used to smelt high-quality carbon steel and all kinds of ferro-alloy steel. The designed volume is from 0.5-150t. And the rate power of transformer can Equipment constitution Purpose: Electric furnace transformer, short net, electrode lifting device, current conducting arm, furnace lid, furnace lid lifting and rotary device, furnace body, furnace titling device, ladle cart, water cooling system, compressed air system, hydraulic system, charging system, high voltage electric system, low voltage electric control system, basic automation and computer control system. Main parameter and chosen type Container
Purpose: it is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc. Features: The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace. The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set plc system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system. Container
Purpose: it is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc. Features: The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace. The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set plc system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system Container
Scrap preheating and continuous charging arc furnace takes advantage of high temperature flue gas in the forth hole to heat the furnace charge. Furnace charge into the preheating period meets furnace flue gas reversely. The furnace Horizontal scrap preheating temperature reaches over 5000 degree. Per tonne steel saves electricity 80-100kwh. Operation of continuous charging arc furnace reduces the content of feo in the residue and the loss of metal in slagging-off. Metal yield can be increased 1.5-2% and the metal yield can reach to 94%. During the operation of continuous charging arc furnace, molten pool is in the state of refining continuously. Intense and continuous reaction between molten pool and residue makes sure the low content of feo. Due to the function of c Container
The introduction of blast furnace Blast furnace is the shaft furnace of metallurgical equipment.Blast furnace is used for melting furnace burden(ore, sinter or pellet) that contains metal components, melting need to add air or happen in oxygen-rich e copper and other materials processing.Blast furnace burden is generally block, fuel is coke.Burden is added in batches from :0.6 m2, 1.2 m2, 2 m2, 2.6 m2, 3.2 m2, 5.6 m2, 8 m2, 10 m2, 11m2 and so on.Our company can design and produce different specification and structures blast furnace based on customer¡¡¡ê¡ès actual demand. Depend on your need
The introduction of blast furnace Production capacity t/(m2d) Lead sinter reduction smelting 50-60 up to 90 Lead pellet reduction smelting 25-40 up to 50 Copper raw concentrate isf smelting 45-55 up to 60 Depend on your need
The blast furnace is one of the most important metallurgical equipment, it has the following characteristics:high thermal efficiency, high specific productivity(specific capacity), high metal recovery rate, low cost, less covering area and so on. Depend on your need
Er and other materials processing.Blast furnace burden is generally block, fuel is coke.Burden is added in batches from the top, forming a stock column.Air is added from tuyere below, coke burns in the tuyere(outlet)area, forming a high-temperature melting area;furnace burden reacts violently here, continue to melt.When you reduction smelting, melt was clarified in the hearth, metal and slag were released. When you matte smelting, the melt flows into the external crucible from internal crucible, to clarify the separation of matte and slag.Hot flue gas through the melt and reach th Lead pellet reduction smelting 25-40 up to 50 Copper raw concentrate isf smelting 45-55 up to 60 emand. Depend on your need
Range of standard gas springs newtone (gas lift, gas spring) is more than hundreds of different sizes, which are used - installation and storage in any kind of position; In addition to standard gas springs, we can offer customized solutions to meet the specific needs of your project. The continuous production of special sizes and our extensive stock enable us to meet almost all requirements within a remarkable short time by guarantee and service of newtone gas springs.
Ount of cold pig iron and ore. The converter is mainly composed of furnace body, transmission device, supporting device, open gear brush, universal joint, lubrication system.Converter has below advantages:high efficiency, easy operation, wide adaptation of ecious metal(gold and silver), copper concentrate sulfur melting, refining crude copper etc.. Converter¡¡¥s processing capacity depends on the materials type and associated equipment type.Generally determine the specification depending on the loading capacity(matte), specifications in common use are 10t¡¡é20t¡¡é30t¡¡é50t¡¡é80t¡¡é100t etc..Our company can design and produce different specification converter based on customer¡¡¥s actual demand. Depend on your need
Heating furnace. - able to heat object marerials in verious temperatures - maintain the optimum combustion status and Reduces the amount of generated scale. - excellent insulation property and a small thermal storage amount - desinged to be operated conveniently and efficiently. - designed to recover waste heat from exhaust gas for the reductiuon of energy consumpton.
Heat treatment furncace. -able to produce best-quality products by maintaining temperature distribution in the furnace evenly. -designed to maintain temparature difference within ¢®¨ú5¢®¨¡c during the entire heating process - furnace equipped with a high-performance furnace suitable for marerials and uses. -designed to be operated conveniently and efficiently with focus on energy saving and quality improvement.
Reheating furnace -designed to obtain a high temperature-increasing speed and even quality, and be operated conveniently and efficiently with focus on energy saving and quality improvement.
Hop-dip galvanizing facilities. - technologies accumulated for over 20 years. - supplied largest hot-dip galvinizing facilities in korea. - achived quality improvemenet and productivity by using special winch system. - achived durability of galvanizing pots through an automatic temperature control system and a flat burner using gas as a heat source.
¡¡¡¡the tap hole clay is with higher plasticity than that of ordinary clay. It is characterized by high adhesive strength, good wear resistance, high sintering speed and easy drill at scheduled time. It is mainly applied to 300m3 to 2500m3 blast furnaces and can ensure not to generate moist mixture & enlarging holes, control flow speed of hot metal, reduce consumption of tap hole clay, guarantee tap hole depth and improve operation conditions. A.1 ton / woven bag b.1 ton / wooden pallet c.50kg / carton box d.According to your requirement
