0.5 ton -10 ton Oil Gas Fired steam boiler
1.Fuel:heavy oil,diesel,natural gas,lpg,
2.Capacity: 500g,1 ton,2 ton 3 ton,4 ton,5 ton,6 ton ,8 ton,10 ton steam boiler
3.Fire tube structure 3 pass
4.Horziontal type industrial steam boiler
5.Plc touching screen intelligent control system
6.Boiler full automatic operation
Boiler mian part 1 set
Burner 1 set
Electric control cabinet 1 set
Valve & Gauge used on boiler main part 1 set
Water pump 2 sets
Smoke chimney 1 set
Water treatment equipment 1 set
Economizer 1 set
Steam Header 1 set
Piping&fittings 1 set
1 ton 2 ton 4 ton Lpg Steam Boiler
Advantages of WNS fire tube industrial oil gas steam boiler
1.WNS series oil Gas fired steam boiler realize high efficient heat transfer, sufficient burning with brand burner, environment protection
2.Applied international latest technology for big volume combustion room design, and use brand burner machine
3.Corrugated furnace design make large heat transfer area and protect furnace
4.Using spirally corrugated tube , 1-2 faster heat transfer efficiency and remove hidden danger of welding cracks
5.Applied wet-back structure thatn can reduce faults rate and maintenance cost
6.Equipped with protection devices for overheating, overpressure, lacking water, leak detection, flameout etc.
30 bhp 40bhp 60bhp gas steam boiler
Horizontal gas steam boiler
fire tube steam boiler 30 bhp-600bhp
industrial gas steam boiler
directly boiler factory
Boiler fuel:natural gas, lpg, lng, cng, diesel, heavy oil
Boiler pressure:below 2.5Mpa
1.Boiler equipped with autoalarm control system,function are as followed:
(1).High and low water level give sound and light alarm.
(2).Low water level interlock protection founction.
(3).Water level automatic control founction.
100 bhp 200bhp 250bhp heavy oil steam boiler
Boiler capacity:0.5-20ton/h
Boiler fuel heavy oil ,bunker c,residul oil
Structure: fire tube steam boiler
1.Boiler equipped with autoalarm control system,function are as followed:
(1).High and low water level give sound and light alarm.
(2).Low water level interlock protection founction.
(3).Water level automatic control founction.
1 ton -6 ton /hr Wood Steam Boiler
Capacity: 1 ton steam boiler,2 ton steam boiler,4 ton steam boiler,6 ton steam boiler
Burn wood log,firewood,wood waste and other solid fuel
3.fire tube and water tube structure boiler
4.horizontal steam boiler
5.fixed grate steam boiler
6.industrial usage steam boiler
As various coated glasses, especially the online and offline low-E glass, are being used more and more extensively in the building industry, JetConvectionTM series tempering furnaces introduced by LandGlass have been winning high reputation in the domestic and foreign markets and heralded as efficient equipment in tempering high end glass products by glass processing companies. In 2015, LandGlass introduced a brand new series of forced convection tempering furnace, i.e. CycloneTM series, which achieved significant improvement in terms of product quality, productivity, energy saving, intelligent control, and wireless connection.
Condition: New
Type: Arc Furnace, SH steelmaking arc furnace
Usage: Melting Furnace
Place of Origin: Shaanxi, China (Mainland)
Brand Name: SHOO-IN
Model Number: SH-1
Voltage: depends on furnace capacity
Power(W): depends on furnace capacity
Dimension(L*W*H): depends on furnace capacity
Weight: depends on furnace capacity
Certification:ISO9001:2008;ISO14001:2004
Warranty: 1year
After-sales Service Provided: Engineers available to service machinery overseas
Item: electric arc furnace
Capacity: 0.5t-150t
Company: Manufacture, factory
Installation: local installation
Usage:
It is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc.
Features:
The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace. The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set PLC system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system. The device is also set with oxygen lance of furnace door, speed oxygen lance of furnace wall, burner and carbon injection system.
Constitution:
furnace body, tilting device, electrode lifting device, furnace lid lifting and rotary device, cooling water and its alarming display device, hydraulic station, compressed air system, feeding system, high-voltage switch system, transformer, series reactor, low-voltage power supply system, computer control system and picture monitoring system, neuron network artificial intelligent electrode control adjustment system.
Main performance parameter:
Smelting period/tap-to-tap cycle: 60min (ultra high power)
Power consumption: ?¤ 380 KWh/t (scrap)
Consumption of electrode ?¤ 2.5Kg/t (scrap)
Service life of water cooling furnace wall ?¥ 3500 ( per furnace)
The average oxygen consumption: 25-50 M3/t
Usage of this device
Steelmaking electric arc furnace inputs electric energy into furnace by graphite electrode. Electric arc producing between electrode tips and furnace burden is used as heat source to smelt steel. The heat source of electric arc furnace is electric energy. Atmosphere inside the furnace can be adjusted, which is helpful to melt steels containing easier oxidation of elements. SH series three-phase steelmaking arc furnace is used to smelt high-quality carbon steel and all kinds of ferro-alloy steel. The designed volume is from 0.5-150t. And the rate power of transformer can reach120 MVA.
Equipment constitution
Electric arc furnace transformer, short net, electrode lifting device, current conducting arm, furnace lid, furnace lid lifting and rotary device, furnace body, furnace titling device, ladle cart, water cooling system, compressed air system, hydraulic system, charging system, high voltage electric system, low voltage electric control system, basic automation and computer control system.
Usage:
It is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc.
Features:
The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace. The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set PLC system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system. The device is also set with oxygen lance of furnace door, speed oxygen lance of furnace wall, burner and carbon injection system.
Constitution:
furnace body, tilting device, electrode lifting device, furnace lid lifting and rotary device, cooling water and its alarming display device, hydraulic station, compressed air system, feeding system, high-voltage switch system, transformer, series reactor, low-voltage power supply system, computer control system and picture monitoring system, neuron network artificial intelligent electrode control adjustment system.
Main performance parameter:
Smelting period/tap-to-tap cycle: 60min (ultra high power)
Power consumption: ?¤ 380 KWh/t (scrap)
Consumption of electrode ?¤ 2.5Kg/t (scrap)
Service life of water cooling furnace wall ?¥ 3500 ( per furnace)
The average oxygen consumption: 25-50 M3/t
Usage:
It is used to melt plain steel, high-quality carbon steel and kinds of alloy steel. It's used to scrap steel operation, scrap steel and molten iron charging operation, scrap and pellet, pre-heating scrap, hot-pressing reduced iron, sponge iron, etc.
Features:
The primary loop series reactor can improve the system impedance to realize the secondary higher voltage. It operates with long arc and low current. The electric arc is stable and the arc power is high. Various performance indicators approach direct current arc furnace. On-load voltage regulation is adopted during the operation of arc furnace. The structure of furnace body is frame type water cooling structure. The furnace shells up and down can be taken down. Proportional value is used to control electrode lifting, the rotary of furnace lid and the furnace body tilting. This device is installed with the whole set PLC system and computer control system, computer image monitoring system and neuron network artificial intelligent electrode control adjustment system. The device is also set with oxygen lance of furnace door, speed oxygen lance of furnace wall, burner and carbon injection system.
Constitution:
furnace body, tilting device, electrode lifting device, furnace lid lifting and rotary device, cooling water and its alarming display device, hydraulic station, compressed air system, feeding system, high-voltage switch system, transformer, series reactor, low-voltage power supply system, computer control system and picture monitoring system, neuron network artificial intelligent electrode control adjustment system.
Main performance parameter:
Smelting period/tap-to-tap cycle: 60min (ultra high power)
Power consumption: ?¤ 380 KWh/t (scrap)
Consumption of electrode ?¤ 2.5Kg/t (scrap)
Service life of water cooling furnace wall ?¥ 3500 ( per furnace)
The average oxygen consumption: 25-50 M3/t
Usage :
LF ladle refining furnace is used to refine molten steel of the primary smelting furnace (electric arc furnace, converter). It can create a micro positive pressure reduction system and can realize the operation of submerged arc heating, argon stirring, white slag refining, fine adjustment of alloy constituent, wire feeding, etc. Its function on molten steel is degassing, desulfuration, purifying and controlling temperature and constituent accurately. At the same time, it has the function of buffering and adjustment on primary smelting and continuous part.
Form of device structure:
Common form of LF ladle refining furnace includes rackle-type and independent frame.
According to conductive cross arm: single arm, three-arm, rotary cross arm (double station)
According to method of ladle delivery: ladle cart type, large rotary table type.
Constitution:
Furnace transformer, short net, electrode lifting device, furnace lid, furnace lid lifting device, heating rackle, (independent frame), electrode rotary device, ladle, ladle cart(ladle turret),argon automatic control system, water cooling system ,compressed air system, hydraulic system, sampling device of temperature measurement, charging system, high voltage supply system, low voltage electrical control system, automatic system, wire feeder, etc.
Usage :
Steelmaking electric arc furnace inputs electric energy into furnace by graphite electrode. Electric arc
producing between electrode tips and furnace burden is used as heat source to smelt steel. The heat source of electric arc furnace is
electric energy. Atmosphere inside the furnace can be adjusted, which is helpful to melt steels containing easier oxidation of elements.
SH series three-phase steelmaking arc furnace is used to smelt high-quality carbon steel and all kinds of ferro-alloy steel. The designed
volume is from 0.5-150t. And the rate power of transformer can reach 120 MVA.
Constitution:
Electric arc furnace transformer, short net, electrode lifting device, current conducting arm, furnace lid, furnace lid lifting and rotary
device, furnace body, furnace titling device, ladle cart, water cooling system, compressed air system, hydraulic system, charging system,
high voltage electric system, low voltage electric control system, basic automation and computer control system.
Usage :
LF ladle refining furnace is used to refine molten steel of the primary smelting furnace (electric arc furnace, converter). It can create a micro positive pressure reduction system and can realize the operation of submerged arc heating, argon stirring, white slag refining, fine adjustment of alloy constituent, wire feeding, etc. Its function on molten steel is degassing, desulfuration, purifying and controlling temperature and constituent accurately. At the same time, it has the function of buffering and adjustment on primary smelting and continuous part.
Form of device structure:
Common form of LF ladle refining furnace includes rackle-type and independent frame.
According to conductive cross arm: single arm, three-arm, rotary cross arm (double station)
According to method of ladle delivery: ladle cart type, large rotary table type.
Constitution:
Furnace transformer, short net, electrode lifting device, furnace lid, furnace lid lifting device, heating rackle, (independent frame), electrode rotary device, ladle, ladle cart(ladle turret),argon automatic control system, water cooling system ,compressed air system, hydraulic system, sampling device of temperature measurement, charging system, high voltage supply system, low voltage electrical control system, automatic system, wire feeder, etc.
Usage :
Steelmaking electric arc furnace inputs electric energy into furnace by graphite electrode. Electric arc
producing between electrode tips and furnace burden is used as heat source to smelt steel. The heat source of electric arc furnace is
electric energy. Atmosphere inside the furnace can be adjusted, which is helpful to melt steels containing easier oxidation of elements.
SH series three-phase steelmaking arc furnace is used to smelt high-quality carbon steel and all kinds of ferro-alloy steel. The designed
volume is from 0.5-150t. And the rate power of transformer can reach 120 MVA.
Constitution:
Electric arc furnace transformer, short net, electrode lifting device, current conducting arm, furnace lid, furnace lid lifting and rotary
device, furnace body, furnace titling device, ladle cart, water cooling system, compressed air system, hydraulic system, charging system,
high voltage electric system, low voltage electric control system, basic automation and computer control system.
Our company, shanghai cadre (jia de) environment energy science & technology co. Ltd. Is in the business of design, manufacturing & supply of industrial furnaces. The company specializes in research & development of energy-saving and carbon emission reduction technology.
For the time being cadre has executed more than 300 installations of reheating furnace both in china and abroad. Almost all were epc turnkey project and with big capacity. The maximum capacity is 420tph. We are doing the total designing and engineering, equipment manufacturing, site construction and management and supervision. The company today holds over more than half market share in the re-heating furnaces areas in china. Continuous research & development work at company’s research centre has made the company possible to win many national patents and kept leading position in the field of regenerative combustion technology at home and abroad.
Our company is now aggressively marketing to establish its business in abroad. Cadre commissioned its first re-heating furnace in india at lloyds, wardha in december 2010. The furnace capacity is 250tph (cold charge) and 350tph (hot charge) and has duel fuel combustion system with coke oven gas and heavy oil with modern features such as walking beam and evaporative cooling system (ecs).
Our company, Shanghai Cadre (Jia De) Environment Energy Science & Technology Co. Ltd. is in the business of design, manufacturing & supply of industrial furnaces. The company specializes in research & development of energy-saving and carbon emission reduction technology.
For the time being CADRE has executed more than 300 installations of reheating furnace both in China and abroad. Almost all were EPC turnkey project and with big capacity. The maximum capacity is 420TPH. We are doing the total designing and engineering, equipment manufacturing, site construction and management and supervision. The Company today holds over more than half market share in the re-heating furnaces areas in China. Continuous research & development work at company’s research centre has made the Company possible to win many national patents and kept leading position in the field of regenerative combustion technology at home and abroad.
Our company is now aggressively marketing to establish its business in abroad. CADRE commissioned its first re-heating furnace in India at Lloyds, Wardha in December 2010. The furnace capacity is 250TPH (cold charge) and 350TPH (hot charge) and has duel fuel combustion system with coke oven gas and heavy oil with modern features such as walking beam and evaporative cooling system (ECS).
1. Operation temperature: 1300°c (1400? for short time).
2. Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina
Fiber ceramic insulation.
3. Heavy duty double layer structure with cooling fan. Lower temperature in outside case.
4. Pid automatic control via current limiting phase angle fired the resistor, e.G. Scr(silicon controlled rectifier).
5. Power control with 30 segments programmable.
Descriptions
Chamber size
200x200x200mm (8"x8"x8")
Working temperature
1300? (continuous)
Maximum temperature
1400? (for short time)
Temperature control
30 steps programmable and pid automatic control
Heating rate
0~15?/min (suggestion: =10?)
Temperature accuracy
+/-1?
Heating element
Silicon carbide heating element(sic)
Working voltage
Ac 220v, single phase, 60/50 hz (or according to your requirement)
Max. Power
Approx 4 kw
Outside size
580x580x920mm
Net weight
130kg
Features:
1.Double layer steel casting with air cooling fans to keep case temperature lower;
2.High purity fiber alumina board chamber for the best energy saving;
3.The temperature is controlled by precision scr(silicon controlled rectifier) with accuracy +/-1 c and 30 segments programmable control;
4.The fast rate of temperature increasing and decreasing.
5.The furnace chamber is ceramic fiber brick with excellent thermal insulation, vacuum reservoir with water cooling system
6.The furnace is equipped with the function of power off automatically when door furnace opening, function of over temperature alarm, etc.
Descriptions:
Chamber dimension 150x150x150mm
Max. Temperature 1600c
Working temp.
