7090 Evapoative Media for Green House Color: Light Yellow,Blue, Green, Brown Material: Macrofiber, Kraft Paper Evaporation Efficiency: 85% Size: Custom-made
Vinh Tuong - Gyproc Gypsum Plaster is a NON-Cracking Plastering product to replace the conventional sand - cement surface finishes, helps to build faster by optimizing preparation time and installation. The product is good for plastering on a wide variety of interior solid background types including concrete, red brick, brickwork and lightweight concrete panels/block. FEATURES Better crack resistance than conventional cementitious plaster. Buildable the thickness from 5mm - 15mm onto concrete, unburnt bricks/panel ie. AAC, ALC, lightweight panels. Provide an even, high quality, and durable surface, preventing the hollow sound issue. Excellent adhesion to the wall surface. Correcting irregularities on backgrounds or imperfections from cracking or uneven surfaces & fewer repair steps required (repair cost). Fast project completion thanks to fewer preparation steps during application and ease of application. COMPOSITION Gypsum powder (more than 60%) and active additives to enhance product performance following the EN 13279 Standard. IDENTIFICATION AND PACKING Gypsum Plaster is packed in PP bags, including the cover printed with product image, safety instructions, batch number, date of manufacture, UOM, correspondence address and application instructions.
Gyproc Moisture Resistant Board is a gypsum board with water repellent additives at the core, encased in a special green paper liner. The gypsum compound and papers are mixed with special substances to specifically increase moisture resistance and non-combustible. These boards are highly suitable as bases for ceramic tiling and marble in intermittent moisture areas such as bathrooms or kitchens, and also external soffits in sheltered positions. Made from 100% natural gypsum, Gyproc Moisture Resistant Board is produced with leading-edge technology with high quality and international standards recognition. Key facts Water absorption: < 5% w/w (ASTM C1396) Flammability: non-combustible material (QCVN 06-2010 and EN ISO 1182) Thermal conductivity: K = 0.16 - 0.17 (W/m.K) (QCVN 09: 2013) Benefits Extra moisture resistance property Lightweight material Quick and easy installation Does not produce toxic fumes or hazardous substances that are harmful to health Highly flexible in creating the highest standards of design Easily decorated with paint, tiles, wallpaper, etc. Easy to bend to create unique design ideas Application Suitable for ceilings (with 9mm thickness) and drywalls (with 12.5mm thickness) of private houses, hotels, and commercial centeres... Suitable as a base for ceramic tiling of wet use areas, such as bathrooms and kitchens. Also used for external soffits in sheltered positions Manufacturing Standards TCVN 8256:2009 European Standard EN 520:2004 American Standard ASTM C1396-14A Board color Light green face paper Green endtape
With prominent characteristics such as water absorption, fire resistant, sound insulation, and thermal insulation, the Calcium Silicate DURAflex board has proven itself to be highly suitable for the warmth, humidity and heavy rainfall of Vietnam, and has therefore gradually become a popular construction material. Moreover, with a 50 year warranty and, 100% asbestos free guarantee, we expect DURAflex to bring consistent and continued satisfaction to end users. Key facts Good water absorption Durability Bright, flat and smooth surface Termite and pest resistance Application Suitable for a wide range of applications such as grid or concealed ceilings, external partitions, underlays, underlay flooring, floor panels and particularly Good for heavy use, wet areas such as bath-rooms and kitchens
Gyproc DuraLine Board consist of an aerated gypsum core with glass fibre and other additives encased in, and firmly bonded to, strong paper liners that are yellow in colour. They are designed for use in heavy use or public areas such as hotels and schools. Gyproc DuraLine is a plasterboard that is suitable for drylining internal surfaces. Key facts Flammability: non-combustible material (QCVN 06-2010 and EN ISO 1182) Thermal conductivity: K = 0.16 - 0.17 (W/m.K) Class 1 surface spread of flame (BS 47 part 7) Benefits Great impact resistance in heavy use areas Lightweight material Quick and easy installation Does not produce toxic fumes or hazardous substances that are harmful to health Highly flexible in creating the highest standards of design Easily decorated with paint, tiles, wallpaper, etc. Easy to bend to create unique design ideas Application Suitable for Gyproc wall and wall lining systems in different types of projects, such as hotels, schools and residential with heavy use areas that require greater impact resistance performance. Manufacturing Standards European Standard EN 520:2004 American Standard ASTM C1396-14A Board color Light yellow face paper Yellow endtape
Gyproc Regular Board is a standard gypsum board with ivory face paper. Suitable for use in most system applications where normal fire, structural and acoustic performance levels are specified. The product is ideal for ceiling and partition systems. Made from 100% natural gypsum, Gyproc Regular Board is produced with leading-edge technology with high quality and international standards recognition Key facts Flammability: non-combustible material (QCVN 06-2010 and EN ISO 1182) Thermal conductivity: K = 0.16 - 0.17 (W/m.K) Benefits Lightweight material Quick and easy installation Does not produce toxic fumes or hazardous substance that are harmful to health Highly flexible in creating the highest standards of design Easily decorated with paint, tiles, wallpaper, etc. Easy to bend to create unique design ideas
Gyproc FireStop Board comprises a gypsum compound mixed with fiberglass and micro in the core, bounded in pink faced paper. It is universally used in Gyproc wall partitioning systems, wall linings and ceiling systems to give increased fire protection. Made from 100% natural gypsum, Gyproc FireStop Board is produced with leading-edge technology with high quality and international standards recognition. Key facts Flammability: non-combustible material (QCVN 06-2010 and EN ISO 1182) Thermal conductivity: K = 0.16 - 0.17 (W/m.K) Benefits: Extra fire resistance property Lightweight material Quick and easy installation Does not produce toxic fumes or hazardous substances that are harmful to health Highly flexible in creating the highest standards of design Easily decorated with paint, tiles, wallpaper, etc. Easy to bend to create unique design ideas
Characteristics: * Feature: Paper faced * Thickness: 12.50mm - 15mm * Width: 1200mm * Length: 2000-3600mm * Edge:Tapered or square edge * Raw Material: High purity gypsum powder * Application: Partition wall, cladding, suspended ceilings * MADE IN TURKEY Advantages: Prevents the passage of smoke and limits the spread of fire. The structural elements of the building are protected thanks to the high resistance of the plate against fire. The time to act and to leave the premises is extended (our 12.5mm thickness boards give 125 minutes of fire resistance if wall system is applied properly).
With aluminum magnesium manganese metal,cold-rolled coil or hot-dip galvanizing as raw materials, it can produce high-quality color coated printing plate, color aluminum plate, household appliance plate and roof with thickness of 0.15-2.2mm and width of 600-1250mm. Annual output: 200000 tons The price we give you is: FOB Tianjin USD1100 / T Minimum order quantity: 1x20 ' Delivery time: 15 days If you are interested, please feel free to contact me
We Are Manufacture Different Roofing Accessories.
With More Than Half a Century of Experience And thousands of Innovative Neque porro quisquam est, qui dolorem ipsum quia dolor sit amet they consec tetur, adipisci velit, sed quia non numquam eius modi tempora incidunt ut labore et dolore magnam aliquam quaerat voluptatemo qui quia dolor sit amedipisci develit.
With More Than Half a Century of Experience And thousands of Innovative Neque porro quisquam est, qui dolorem ipsum quia dolor sit amet they consec tetur, adipisci velit, sed quia non numquam eius modi tempora incidunt ut labore et dolore magnam aliquam quaerat voluptatemo qui quia dolor sit amedipisci develit.
Improved thermal comfort all year round Reduced noise levels Saving on energy costs Helping the environment Condensation control
Technoshade is one of the best and leading shade providers in Kolkata India. The company is well-known to offer quality, designer, and custom-made shades for industrial, commercial and residential needs. It has been years that the company has been serving the needs and demands of shades for various clients from different parts of the country, India. When you are looking for quality, industry standard, and affordable shades for your home or office, you can certainly contact Technoshade. Technoshade offers an array of sheds and canopies for personal and commercials purposes for different areas of your property, Rooftop shade Car Parking Shade Swimming Pool Cover Walkway Atrium Cover Tensile and Sail Canopy Awnings Canopy Glass Canopy and Pergola Fire Exit Stair ACP and Structural Glazing When you want on-time delivery and affordable shade in your city Kolkata, you can certainly count on Technoshade. We Technoshade offer quality shades at the best price.
Product Keyword Membrane structure PVC membrane structure Swimming Pool Roofing shade structures Tensile Structure J&J carter kederpro Brand Name Keder Max Website Link https://www.kedermax.com/single-flap-keder Product Material PVC Coated Fabric Place of Origin India FOB Price $ 0.9 - $1.3 MOQ 1000m Accepted Payment T/T- L/C Lead Time / Processing Time 7 working days Port Mumbai Supply Ability 20000m 10mm Single Flap Keder has one flap, which can be welded or sewn to the material. It can be welded using wedge welders, hot air welders, or RF welders requiring only a simple overlap weld. We manufacture Keder with sizes from 4mm to 15mm for various applications and with various configurations. Application: Awning, Banner & Canopy Industries, PVC Tarpaulin, Tent and Machine Covers 1) 10mm Keder With Flap 30mm 2) 10mm Keder With Flap 40mm
Decoration material
Product Description 1.Thickness:0.15-4.0mm 2.Width:600-1250mm 3.Zinc:30g-275g 4.Material:CGCC,SGCC,SGHC,SPCC,etc. product name Corrugated steel sheet. thickness 0.15mm-4.0mm width 600mm-1250mm762mm,914mm,1000mm,1200mm,1219mm,1250mm zinc coating 30g,40g,60g, 80g, 90,100g, 120g, 140g,180g, 200g, 250g, 275g and so on. standard GB/T 12754-2006;ASTM A 755;EN 10169;JIS G 3312;AISI;BS;DIN material CGCC/SGCC/SGCH/SPCC Color options Ral number or as per your request. Pitch from 75mm to 78mm. Depth of corrugated from 15mm to 18mm. payment T/T, L/C or DP min order 25 tons (one 20ft FCL) packing export standard. quality soft or hard quality
PVC overlay: lamination of decorative PVC foils on MDF, Plywood, gypsum boards, and other cellulosic fiberboards. Suitable to bond BOPP and polyester film on similar wooden or cellulosic boards, Side Gluing/folder gluing of cartons and corrugated boxes, Lamination of paperboards for multiwall
Characteristics: * Feature: Paper faced * Thickness: 12.50mm - 15mm * Width: 1200mm * Length: 2000-3600mm * Edge:Tapered or square edge * Raw Material: High purity gypsum powder * Application: Partition wall, cladding, suspended ceilings * MADE IN TURKEY Advantages: Resistance to water, humidity and vapor. Effective against water leaks. Ideal for wet rooms.
Feature: Paper faced Thickness: 9.50mm 12.50mm 15mm Width: 1200mm Length: 2000-3600mm Edge:Tapered or square edge Raw Material: High purity gypsum powder Application areas: Partition wall, cladding wall, suspended ceilings MADE IN TURKEY Advantages: Enables to create perfect backdrop. As a breathable material, balances the ambient humidity and helps to create healthy environments. Compared with traditional wall applications, significantly reduces the loads of the wall at the building. Minimize the problems resulting from handling, application and use due to its high durability.
