Butane gas cartridge Net weight: 190gr Suitable for camping, indoor and outdoor use. High quality product complying with EN 417 and European standards. 48 pcs/ctn or 36 pcs/ctn
Butane gas cartridge 500gr , not refillable, no valve. Net weight: 500gr Suitable for camping, indoor and outdoor use. Long duration with low cost. High quality product complying with european standards. 18 pcs/ctn
Gas cartridges 190gr, butane gas cartridges 500gr, gas stoves, gas canisters, gas appliances, butane cartridges.
The leb-tile roof panel is thermal insulating products used in house coatings, hotels and other structures where necessary aesthetic and architectural effect of a tile roof. It is also an ideal cover material in reconstructions of buildings, but also in old buildings additions where weight restrictions of the classic tiles. Thicknesses of panel: 65mm (average thickness- lower 45mm higher 95mm) Sheet thicknesses: 0.45mm to 0.60mm Colors: ral Max length / item : 9.25m ( with overlap there is no length limit ) Due to tile form the length are the following: 1.90 - 2.25 - every 35cm up to - 8.90 - 9.25.
The leb-tiie delux roof panels, thermal insulation products are used in house coatings, hotels and other structures where necessary aesthetic and architectural effect of a tile roof. In addition they offer a ready, absolutely ecological roof, the interior of buildings where applicable. The leb-tile delux ceiling panels are embedded in the bottom ribbing natural wood 12mm.They can be used in structures with visible roof, as it is, without the need of covering the panel with extra interior covering. Thicknesses of panel: 65mm (average thickness- lower 45mm higher 95mm) Sheet thicknesses: 0.45mm to 0.60mm Colors: ral Max length / item : 5.40m ( with overlap there is no length limit ) Due to tile form the length are the following: 1.90 - 2.25 - every 35cm up to - 5.05 - 5.40
The trapezoidal sheets leb -deck 920, 1000, 1060 and the leb tile used in roof coverings and wall covering buildings in single sheets or in the form of composite construction with two sheets and some form of insulation (e.G., wool, polystyrene, etc.) there between them. The leb-deck 1000 may be combined perfectly in the same construction as leb cover panels. On curves coatings will special calculation must be made whether the sheets can follow the curvature of the building. The trapezoidal leb-deck sheets are manufactured in galvanized steel, aluzinc or prepainted. The metal tile leb tile can be perfectly combined in the same construction as the leb tile panel and leb tile panel delux which is actually the outer sheet of the leb tile panel.
The roof panels are insulated products used for coating industrial and manufacturing facilities, depending on the strength requirements, aesthetic and economic construction, providing economy in energy consumption in cooling - heating, possibility for easy extension and easy metal perfect fit clasp. In various thicknesses. Thicknesses of panel: 30mm up to 100 mm Sheet thicknesses: 0.25mm up to 0.6 mm Colors: ral Max length / item : 13m ( with overlap there is no length limit ).
The panel leb wall with hidden support is composite thermal insulation panel composed of two slightly shaped, galvanized pre-painted sheet metal and insulating structural hard polyurethane foam core, and technology does not allow to show the panel mounting screw, produced by non-incriminating materials for environment and stringent quality controls. In various thicknesses. Thicknesses of panel: 40mm up to 200 mm sheet thicknesses: 0.25mm up to 0.6 mm colors: ral max length / item : 13.5m.
The leb wall hs etl wall panels are composite thermal insulation hidden support panel, consisting of two slightly shaped, galvanized and pre-painted sheet metal and rigid foam insulation palyourethanis structural core. To specific type insulating panel has a unique design that allows the use of a horizontal n vertical applications in projects with architectural requirements. Thicknesses of panel: 40mm up to 100 mm Sheet thicknesses: 0.25mm up to 0.6 mm Colors: ral Max length / item : 13m ( with overlap there is no length limit ).
The thermal insulating panels wall leb- wall (vs), consisting of two slightly shaped, galvanized and pre-painted sheet metal and insulating structural hard polyurethane foam core, are used for covering building facades, and for building internal partition walls and suspended ceilings. The insulating panels leb-freeze refrigerated chambers, are composite panel consisting of two slightly shaped, galvanized and pre-painted sheet metal and structural insulating polyurethane rigid foam core suitable for temperature-controlled rooms. Thicknesses of panel: 40mm up to 200 mm sheet thicknesses: 0.25mm up to 0.6 mm colors: ral max length / item : 13.5m.
Polyurethane metal panels, roof metal panels, wall metal panels, cold room metal panels, pvc panels, polyester panels, architectural metal panels, tile metal panels, tile metal panels with wooden internal surface, special metal pieces, trapezoidal metal steel sheets.
