Ritver Wood Glue is water-based adhesive, based on polyvinyl acetate homopolymer, with excellent high tack and bond strength, developed for various wood applications, such as carpentry uses. Inc of bonding timber, MDF, Doors, Windows, in high-speed assembly lines at joineries. It is also useful for decorative to ply, block boards, tiles in dry condition. etc., The wood glue is not suitable for perpetual wet areas like toilets, kitchen sink etc., Virtues: It is a nontoxic and nonflammable water-based, environmental friendly single component
Providing you the best range of high temperature inorganic ceramic adhesive with effective & timely delivery.
Polyurethane Windshield Adhesive is a component, moisture curing polyurethane based adhesive for direct glazing in Automotive Glass Replacement. One component formulation Good non-sag properties Short cut-off string Cold application Fast curing â?? Rapid strength development High mechanical performance High Modulus High initial bond strength Can be overpainted
Akfix G400 is a two component marble and natural stone adhesive based on polyester resin. Resistant to UV Resistant to alkalis and diluted acid solutions Temperature resistance of cured adhesive is between -10 C and +100 C Bonded surfaces are ready to be used after 2 hours No color change, cracking or shrinkage during hardening period
An adhesive set which consists of high viscosity cyanoacrylate adhesive and activator. High bonding strength. Suitable for use on vertical surfaces as it will not drip or slump. It is particularly suited to bonding difficult substrates which have a porous or uneven nature since it increases bonding strength by preventing the adhesive to be absorbed by the surface.
One-component, fast curing liquid polyurethane adhesive. It possesses high water resistance and bonding strength. Fast curing. Low press time. Transparent. Extremely high bond strength on numerous substrates. Conforms to D4 according to DIN EN 204. Easy to use. Very good resistance to chemicals. Excellent resistance to moisture and weather conditions. Nonshrinking. Low odour. Useable in slightly wet substrates.
PVA glue iAdPro 1051 is best used for cardboard, light wood, paper, and other such materials. It does form a strong bond, it dries quite quickly and remains flexible once dry.
It is good for paper lamination, cardboard to print, or lacquered carton, mainly used in Paper Core and general bonding of paper also.
Contact Adhesive is an extra-strong, quick-drying, e. It will repair a wide range of materials including wood, hardboard
WG 50 especially for binding wood. It also can you paper and corrugated boxes.
The multipurpose high polymer modified thin-set adhesive offering vast application for interior & exterior areas . It is comentitious power to be mix only with water to install various types of medium & large format tiles & stone on variety of substrates using thin-set compliance.
The double wall semi-rigid heat shrinkable end is composed of semi-rigid polyolefin and hot melt adhesive. The outer layer is radiation crosslinked polyolefin and the inner layer is hot melt adhesive. One end of the product has been pre contracted and sealed, which has double effects of insulation and sealing. It is used for mechanical protection, sealing, waterproof and moisture-proof and environmental protection of power cables, wires and harness ends. Product features shrinkage temperature: 80 Â Final shrinkage temperature: 125 Â Service temperature - 45 ~ 110 Heat shrinkable ratio: 4:1 Standard color: Black Voltage class: medium and low voltage power cable (35kV and below) Purpose: radiation crosslinking heat shrinkable sealing cap is suitable for the end waterproof, insulation and protection treatment of power cable or communication cable. The mouth end is coated with high-performance hot-melt adhesive. When heated, the sealing cap can shrink, and the glue melts. It is tightly bonded to the surface of the cable, playing an excellent waterproof, insulation and protection effect.
Description VOG is one component, premixed, modified polymer cement based tile adhesive used for bonding ceramic tile on the surfaces of wall, ground and floor. It is easily applied and can achieve an excellent adhesion. Where to use: - For wall surface: To bond ceramic tile (maximum is 60X60cm) on the concrete or cement sand rendering. - For floor and ground: To bond ceramic tile or building stone. Advantages - Stable performance, use directly after mix it with water; - Good flexibility - Nontoxic, non-radiant, no irritative odor; Application Surface Preparation: - The surface should be vertical, flat, smooth and free of dust, grease and other contaminants. Mixing Add clean water to suitable mixing bucket. Mix slowly and continuously to form a homogeneous mixture - VOG 25kg barrel required approximately 5 - 6,0 litres of clean water - VOG 5kg barrel required approximately 1 - 1,2 litres of clean water The mixed materials is immediately ready to use and should be used within 25-30 minutes after mixing. Storage Conditions: Keep in cool and dry places Packaging: 25kg/barrel and 5kg/ barrel SHELF LIFE: 09 months
* Convenient for all drywall joint repairing, filing and finishing works * Easier to apply and sand due to less weight (up to 25%) * Minimizes coats over corner bead thanks to less shrinkage * Net weight: 17L * Color: white powder * Drying time: 12-24 hours
DESCRIPTION: Water-resistant cement-based tile adhesive for fixing ceramic glazed tiles for both floors and walls for internal applications. It can also be used for external areas or fixing homogenous vitrified tiles, glass mosaic and natural stones when mixed with CMI Mortar Admix 380. USES: Fixing of ceramic tiles, glass mosaic, stones onto concrete slab, screed / render, RC walls, blockwall. For other areas not specified, please consult CMI Technical Representatives for more information.
BIRKOSIT Dichtungskitt, A single component sealing paste material of complete seal guarantee even for pressure up to 250 bar. Pressure resistance for flanges without sealing rings is guaranteed up to 450 bar, and even up to 550 bar for screw joints. It can be used with the support of a brush or else putty knife to dry the sealing surface on both sides with a temperature resistance of upto 900â?° C of natural gas. This material has a surface finishing accuracy of 0.8 microns to 1.2 microns. The surface life of this sealing agent is so good compared to many other sealing materials. You can get this item in a packing quantity of 1KG Tin which contains a storage life of 5 years if sealed properly.
Strong bonding between casing and tread Protection against casing failure Increase casing retreadibility Cost effective retreading
Top quality Stone Materials Acrylic Glue MMA for countertops,10 years no yellow ATTRIBUTES Color: More than 1000 glue colors for matching, customized color Type: Artificial stone/Quartz stone adhesive OEM: OEM and ODM are available Warranty:24 months saved in 10 Celsius-18 Celsius and 10 years nonyellowing Cartridge Brand: MIXPAC Applicable Stone: Most artificial marble, granite, natural stone, etc Mix Ratio:10:1 SPECIAL FEATURES 1.Own� 90% of the Chinese market 2.Bond Strength: High bond strength, better than Corian and LG, Quartz adhesive is better than Integra 3.Non yellowing with 10 years warranty 4.Low temperature resistant: -50 Celsius, High temperature resistant: 180 Celsius 5.Curing time: 18-22minuts at 24 Celsius 6.Shelf time 24 month (10 Celsius-18 Celsius) 7.More than 1000 colors, matched with Staron, Corian, Case stone, Silestone, Magicstone, etc 8.The only Chinese glue manufacturer can use MIXPAC cartridge with intellectual property protection 9.SGS,ROHS,SVHC,ISO9001Certificated 10.Free sample
OEM COMPAC surface adhesive ATTRIBUTES Color: More than 1000 glue colors for matching, customized color Type: Artificial stone/Quartz stone adhesive OEM: OEM and ODM are available Warranty:24 months saved in 10 Celsius-18 Celsius and 10 years nonyellowing Cartridge Brand: MIXPAC Applicable Stone: Most artificial marble, granite, natural stone, etc Mix Ratio:10:1 SPECIAL FEATURES 1.Own 90% of the Chinese market 2.Bond Strength: High bond strength, better than Corian and LG, Quartz adhesive is better than Integra 3.Non yellowing with 10 years warranty 4.Low temperature resistant: -50 Celsius, High temperature resistant: 180 Celsius 5.Curing time: 18-22minutes at 24 Celsius 6.Shelf time: 24 months (10 Celsius-18 Celsius) 7.More than 1000 colors, matched with Staron, Corian, Case stone, Silestone, Magicstone, etc 8.The only Chinese glue manufacturer can use� MIXPAC cartridge with intellectual property protection 9.SGS,ROHS,SVHC,ISO9001� Certificated 10.Free sample
ATTRIBUTES Color: More than 1000 glue colors for matching, customized color Type: Artificial stone/Quartz stone adhesive OEM: OEM and ODM are available Warranty:24 months saved in 10 Celsius-18 Celsius and 10 years nonyellowing Cartridge Brand: MIXPAC Applicable Stone: Most artificial marble, granite, natural stone, etc Mix Ratio:10:1 SPECIAL FEATURES 1.Own� 90% of the Chinese market 2.Bond Strength: High bond strength, better than Corian and LG, Quartz adhesive is better than Integra 3.Non yellowing with 10 years� warranty 4.Low temperature resistant: -50 Celsius, High temperature resistant: 180 Celsius 5.Curing time: 18-22minuts at 24 Celsius 6.Shelf time: 24 months (10 Celsius-18 Celsius) 7.More than 1000 colors, matched with Staron, Corian, Case stone, Silestone, Magicstone, etc 8.The only Chinese glue manufacturer can use MIXPAC cartridge with intellectual property protection 9.SGS,ROHS,SVHC,ISO9001 Certificated 10.Free sample