Astrosol DA is a viscous solvent cleaner, for removal of adhesive residues, corrosion preventive film, such as greases and corrosion inhibiting compounds. Also excellent for hard-to-remove, oxidized oils and grease buildup.
Packex- AC is an organic compound that offers a wide range of 3D bonding properties for polymer mixtures such as cellulose, starch, etc. under certain conditions. Thus, it improves the mechanical properties of polymers and enhances the quality of products that use these polymers. Features: - Adhesive Increase: Increased adhesive for both carton types using high quality paper, high waterproof => support to increase production efficiency - Hardness Increase: Increase the hardness of the carton; minimize the phenomenon of moisture absorption of the carton after production => support to increase production efficiency - Water Resistance: Increase the water resistance of the glue => meet the requirements of carton styles contacting in wet environments at once increase the hardness of the carton => support to increase production effiency
Properties: 1.Lg-768 has improved adhesive performance: the new material can improve the initial adhesive force of rubber and steel wire, rubber and fiber and the adhesive force after aging.The results showed that the adhesive quantity of steel wire/fiber cord increased and the adhesive force increased.In addition, the adhesive along the direction of vertical to the cord line out of the thread shape, the thread shape is obvious, the pitch is shortened, uniform. 2.Lg-768 has improved aging resistance: an hindered phenol structure is formed between the phenolic hydroxyl group and methoxy group on the molecule, which can trap free radicals in the consumed rubber system and terminate the chain reaction, thus improving the heat-resistant aging performance and fatigue resistance of the polymer material.Because this material can effectively improve the adhesive aging performance of tires, it can greatly reduce the problems of shoulder empty and delamination.Improve the high speed and durability of finished tires, extend the service life and driving safety of tires.
The traditional solder paste storage method is to use a special person to stick the label and put it into the refrigerator for storage. This directly affects the production cost of the enterprise. The automatic FIFO solder paste can effectively solve this problem, eliminating the label management and saving one person. The labor cost, and the management of solder paste is more standardized, avoiding the waste of solder paste and improving the production efficiency of the workshop by 10%. DongHongXin 17 years focus on the electronic smt industry turnover storage solution one-stop strength manufacturers, willing to be electronic The development of the industry contributes to its own meager strength. Product Code: SMF10A04-000-R1; Material: ABS plastic + aluminum alloy; Size: 460 * 580 * 99 mm; Storage: 23 bottles; Packing: wooden frame packaging.
Red glue is an indispensable material for electronic smt processing enterprises. Its control directly affects the utilization rate and production efficiency of red glue. DongHongXin has developed a red glue FIFO legal control based on customer demand. The fixture can standardize the management of red glue, improve the use efficiency of red glue to avoid waste, and save 10% of the cost of red glue in one year. The products are well received by major electronics companies. 17 years of technology precipitation DongHongXin company can be customized according to your requirements, 8 days fast delivery. Red glue FIFO legal control Product No.: SMF10H06-000-R0; Material: ABS plastic; Size: 435*995*300 mm; Storage of 100 bottles of red plastic; Packing: wooden frame packaging.
Fully organic natural glue
Specification Color White Material 100% Polyester Thickness Appr 1.7 mm Width 100 cm Roll length 25M Weight 160 g/m2(+/5%) Construction Nonwoven fleece in middle,top with PE foil and bottom with anti-slip coating H.S code: 5603949019 Features 1)non-slip on stairs , fixation with no tape,for secure construction sites; 2)impermeable, protects conrete against liquids of all kinds; 3)extremely robust and tear-resistant; 4)does not moult when wiping; 5)easy installation and disposal; 6)can be wiped and vaccumed; 7)no residues were on the ground. Applications 1)safer and more effective protection for covering soil of all kinds, carpets, tiles, furniture ets 2)particularly dense protective fleece with a waterproof film. Floor and stairs are so protected optimally even under unfavorable conditions. 3)makes for a clean and safe building site
Product: multifunctional protection and covering nonwoven with adhesive coating Material: nonwoven synthetic fleece in middle top with PE foile as liquid barrier bottom with anti-slip coating Colour : White Applications: tiled floor Parquet laminate flooring, textile floor Stairs Kitchen worktops, ceramics, sanitary ware, flat work Plants Features: non-slip on stairs no fixation with tape, for secure construction sites. impermeable, protects concrete against liquids of any kind (paint, solvents, ..) extremely robust and tear-resistant does not moult when wiping easy installation and disposal it can be wiped and vacuumed No residues were on the ground Benefits: Protects carpets, stairs, tiles against mechanical damage and stains from spilled liquids. Helps prevent accidents back with active antiskid Fast and wrinkle-free design time savings Used several times Cost savings Environmentally friendly, Free of harmful substances, thermally disposable Note: important for newly laid floors, porous stone floors and clay tiles is not suitable Installation: Lay 10 cm overlaps Packing role long 50M, 25M,10M roll width 100cm diameter ca 20cm,15cm,9cm
iBond i452 is high viscosity cyanoacrylate super glue, which has very good performance on coral and rock bonding. We highly recommend it for aquariums.
iBond i401 is general purpose cyanoacrylate super glue for industrial use. It is typically used for porous surface, acid surface bonding.
iBond i495 is cyanoacrylate super glue for industrial use. It has good performance on metal bonding.
Bone glue is light yellow or brown grain, It is mainly used in photographic paper, bill spread the nature, fixature, printing & dyeing, galvanoplastics liquid, polishing coating, emery cloth, sand paper, ink , rubber padding, leather polishing ,dyeing and weaving, paper making, handicraft glues, match ,wooden furniture, forage, rubber industry and construction field. Based on QB/T 1995-2005 national industry standards, we are equipped with great variety of goods and special glue used for different industries.
sticker adhesives
Our Company Offer Good Quality Of Hot Melt Adhesive Include Glass Transparent And Normal Adhesive. Item Color Low Tempreture Light Yellow, White, Brown 130-150.C Middle Tempreture Light Grey, White, Brown, Light Yellow 150-180.C High Tempreture White , Brown, Light Yellow, Grey White 180-210.C
FIBRE GLASS SELF-ADHESIVE TAPE Application:Repair dry wall, join plaster board and repair cracks and other damage in other wall surfaces, it is an ideal and necessary material for inside wall repairing and decoration of modern building. Characteristics:Excellent alkali resistance,high tensile strength and deformation-resistance, perfect chemical stability, wonderful self-adjesove and well locativeness,very easy to be applied and can be used for long time Specification:8*6,8*8,9*8,9*9 mesh/inch etc(mainly C-Glass Leno Weave) Gram weight: 55-80g/sq.m Slitted Size:Width 5cm,10cm,15cm, 20cm, or wider. Length:10cm,20cm,45cm,90cm, or longer. Fibre Glass Self-Adhesive Tape
Name: super glue Appearance: colorless transparent liquid Package: 2g / 3g per tube, 1 ¡¡¨¬c 12 tubes per blister card according to customer¡¡¡ê¡ès requirements Cure time: 3 ¡¡¨¬c 10 seconds Tensile strength: 150 ¡¡¨¬c 280 kgf/cm2 Shelf life: 6 ¡¡¨¬c 12 months from date of manufacturing unopened at cool, dark and dry place Application: for bonding wood, rubber, plastic, metal, paper, leather, glass, firber, ceramics and etc.
Double component glue, clear liquid, a: resin, b: hardener, ratio:5:1/3:1/2:1/1:1 5kgs/can, 20kgs/carton
Instant Super Glue is a kind of colorless and clean liquid, holds such features as easy to handle, multipurpose and steady, which is widely used for plastic, rubber, wood, metal, glass, porcelain, leather, artscrafts, toy, house lamp, etc 3g/pc,12pcs/card 50card/carton CBM:0.038 GW:7.1kgs/carton
Description: Cetfix NSA is polymer modified cement based powder needs to be mixed with water for installation tiles over tile or smooth surface without removing old tiles or hacking the surface. Advantages: Excellent waterproofing characteristics Ready to use, No curing required Soaking of tiles not required Reduces labour cost Excellent adhesion, low shrinkage Area of application: Suitable for tile on tile application Plastered wall Bathrooms Swimming pools Kitchen Wash area 20 KG
Properties These adhesives are formulated to give tackiness at a specific temperature only The adhesives are used either in combination or separately depending on the quality of cloth and temperature in working area LT MT HT are not affected by the usual printing auxiliaries frretain their adhesion and strength over a period of time Uses LT MT HT are colourless liquid thermoplastic base blanket adhesive for the safe adhesion of fabric on the rubber blanket of flatbed rotary printing machine Safety Always keep the container closed in a ventilated place The materials are highly inflammable Keep away from smoke fire and other sources of ignition Use protective gloves Er wear glasses for safety of eyes Do not smell the material Dispose the carbuoys after washing Shelf life 1215 months if container is closed properly Packing 10 Kg plastic carbuoy Custom packing available as per customer requirements DESCRIPTION A SUPER PRESSURE AND TEMPERATURE SENSITIVE ADHESIVE FOR FLAT BED SCREEN PRINTING MACHINES WHICH REMOVES ALL TACKINESS AND SHADOW PROBLEMS HT High Temperature 80C It has not tackiness and used for levelling purpose as well as for avoiding marking problems PGMT Printing Gum Mild Temperature It has little more tackiness than HT MT Medium Temperature 50C It has more tackiness than PGMT LT Low Temperature 25C It has highest tackiness and used in Cold Season Textile Printing Chemicals Ubiquitous also manufacture other Textile Printing chemicals as per customer specifications
