Feature:
This machine adopts vacuum suction tray glass clamping and stepless regulator, suitable for peripheral and bevel grinding of different size of circular flat glass or which having a shape similar to square. Rough grinding, fine grinding and polishing can be completed in one process. (compared with single-arm machine, it eliminates the trouble of fine grinding, polishing wheel changing and increasing processing speed.)
Technical specifications:
1. Glass thickness: 4 ~ 20mm
2. Bevel angle: 0p~ 20p
3. Glass thickness: max: 1500 x 1500mm min: 400 x 400mm
4. Power: 8kw
5. Weight: 2000 kg
6. Size: 2000 x 1500 x 1500mm.
SG-3000-1DD is a professional equipment to produce laminated glass without autoclave. It is able to produce various laminated glass thanks to the advantages of this machine and specific film. You can insert the silk, paper, plastic film, metal mesh, fabrics or other films into normal glass sheets in order to produce decorative and functional laminated glass.
The heating elements would be placed in horizontal direction, which means to be parallel with glass sheet. The heating would be achieved with electricity heating tube, and evenly be distributed by assistance of two air blowers. In this case, it can quickly reach to the target temperature, so that to save a lot of time and power consumption.
The mechanical parts are applied with strengthen steel for heavy glass, which allow to have a full loading of 40mm thick of glass, it is able to produce both the single piece or multi pieces by means of different combination so that the production capacity would be increased for double or triple. The mostly equipment would be placed inside of furnace with good ventilation, and easily for maintains, thus, it obtains beautiful shape and safe purpose.
The control system applies the PLC with touch screen; all the parameters can be easily and directly set trough finger touch. The temperature would be regulated by means of changing the value of voltage, so that it can have accurate temperature control.
The furnace door would be opened or closed by pneumatic or electricity power; thick insulating materials; high tear-resist silicon rubber bags; high temperature-resist bear for pulling. CE regulated electronics and wiring; power-strengthen vacuum pump, well-know brand electronic¡ all above basic elements ensure the quality and stability of machine.
SG-3000-2DD is a professional equipment to produce laminated glass without autoclave. It is able to produce various laminated glass thanks to the advantages of this machine and specific film. You can insert the silk, paper, plastic film, metal mesh, fibre or other films into normal glass sheets in order to produce decorative and functional laminated glass.
The machine is controlled by PLC with touch screen. It is equipped with three automatic sandblasting guns, which controlled by programs, and also one more gun for manual operation, so that it can be available for both bulk production and single piece processing.
Mainly used in the production of various modes of transport windshield, side windows, shower room, construction, household appliances and so on with the production of curved toughened glass.
Note: The table dimensions are in millimeters as a unit, yield 80% according to 5mm glass loading rate was 100% finished product rate, the glass can cause changes in the thickness of the scope of production change.
This series product is flat glass and bent tempered glass production combined vertical and horizontal steel furnace, mainly for the production of architectural curtain wall, various modes of transport windshield, side windows, shower room, home appliances, with flat or bent tempered glass production.
ÐͺÅModel ×î´ó¼Ó¹¤³ß´çMax.Bending
Size(mm) ×îС¼Ó¹¤³ß´çMin.Bending
Size(mm) ×îС¼Ó¹¤°ë¾¶Min.processing radius(mm) ÇúÂʰ뾶Curvature radius(mm) ºThickness(mm) ²úÁ¿Capacity
(batch/h)
QYP-H2010 1000¡Á2000 400¡Á300 ¡Ý450 4-12 16
QYP-H2012 1200¡Á2000 400¡Á400 ¡Ý600 4-12 16
QYP-H2410 1000¡Á2440 500¡Á500 ¡Ý450 4-12 16
QYP-H2412 1200¡Á2440 500¡Á500 ¡Ý600 4-12 16
QYP-Z3620 3660¡Á2000 400¡Á400 600 450 4-12 16
QYP-Z3624 3660¡Á2440 400¡Á400 850 350 5-12 16
QYP-Z4224 4220¡Á2440 600¡Á600 850 350 5-12 16.
Note: The output of the largest piece of glass in accordance with 5mm single-station production of 100% finished product rate. Flat steel production may refer to the former flat steel-based series, will not produce changes.
Use of forced convection heating section from top to bottom, so that the upper and lower surface of heated evenly, in thermal efficiency also has a big improvement. Mainly for the production of construction, decoration, household appliances, industrial instruments such as using high-grade flat glass.
Note: The table dimensions are in millimeters as a unit, yield 80% according to 5mm glass loading rate was 100% finished product rate, the glass can cause changes in the thickness of the scope of production change.
X6.11S glass (crystal) mosaic beveling machine with dual dovetail national patent original beam before the elevator, equipped with high-precision grinding ABB motor, the unique design of the front and rear plates, so that machine superior performance, both can be processed into a little 15mmX15mm of glass mosaic and glass wide variety of more than 15mm long (to create new industry standards), the processing speed is more than 5 meters per minute, regardless of efficiency or yield have led the industry. Can be processed more than 40mm wide bevel, and five, seven, nine multi-stage bevel is KTV glass decoration, fight mirror, home decoration, furniture, sanitary ware the best choice, worthy of the name-- the real King of glass beveling machinery.
The straight side can be groud to be flat and vertical to the surface of the glass. And it can bevel the arris of the straight edge to angle of 45 degree. The rough grinding, fine grinding, polishing for flat edge and arris bevelling can be finished at one travelling. Continuous processing can be taken for glass of the same thickness. The shineness of the glass edge surface after being processed will be almost the same as the glass flat surface.
Pneumatic clamping of the glass sheet during the drilling operation of Opposite drilling head.BZ0213 glass drilling machine is equipped with a glass supporting table.
Major Technical Specification
Drilling Hole Diameter 4-130(mm) Glass Thickness 2-20(mm)
Space Between Drilled Hole Center And Vertical Post 1050(mm) Total Power 1.7(kw)/2.2(kw)
Dimension 1.65x2.6(M) Weight 900(kg)
BQ2500 Glass horizontal washing & drying machine is working for various flat glass and specially working for LOW-E glass. The structure of machine is made of painted steel; All parts in contact with water are waterproof materials made. The machine equipped with 4 pair of brushes and air-knife so that generate a perfect washing and drying, All driven-rolls are steel made, suitably coated with vulcanized and rectified rubber, soundproof blower, is placed on the top of drying section, to ensure a strong force air for drying. The washing section is well controlled by PLC, and it is able to be completed lift up or low-down for the purpose of different thickness of glass.
W26 horizontal washing machine is an particular design for Low-E glass and other coated glass, it is also can perfectly perform washing and drying for all kind of flat glass.
Min. Size 300*350mm
Max.Size (Width) 2600mm
Glass Thickness 3-60mm
Processing Speed 1.2-6m/min
Intalled Power 39KW
No. of Burshes 4pairs
Dimension 8500*4500*3500mm
Weight 4500kg
1.1. This glass edger and variable miter machine is able to grind and polish the miter angles of the glass, with bottom edge polishing and rear seaming all at the same time.
1.2. The control system of this glass miter machine uses a Mitsubishi PLC control unit.
1.3. The input and output conveyor adopt timing belt which can improve the transmission precision.
1.4. The processed glass surface is very bright and smooth, approaching the original glass surface.
1.5. The mitering angle of the glass machine ranges from 0 to 60 degree.
1.1 This glass mitering edging machine is able to process and polish all miter edge, bottom edge and arris on glass at one time. There are 3 wheels for each arris.
1.2. The control system of the glass mitering edging machine uses a Mitsubishi PLC control unit.
1.3. The input and output conveyor of the machine adopt timing belt which can improve the transmission precision.
1.4. The mitering angle ranges from 0 to 60 degree.
Technical data of water jet cutting machine
The machine has three parts: cutting table, intensifier pump, controller
1) We have two kinds of cutting table: bridge style and flying arms style, their technical data is as follows:
Z-axis journey is 150mm
Three-axis control, Auto zero positioning
Way of drive : Servo ( drives and motors are FUJI brand from Japan )
All screw and linear guide are ABBA brand from Taiwan
Control accuracy: í+0.01mm
Cutting accuracy: í+0.2mm
2) The intensifier pump we introduce you to use is made in China, its technical data and components are as follows:
Type of pressurization is hydraulic. (The water is pressurized by using the fluid pressure intensification principle)
Max. oil discharge is 90 L/min
Max. water discharge is 3.7L/min
Max. diameter of orifice is 0.3mm
Max. operating pressure is 380MPa
Continuous operating pressure is 330MPa
Power requirement : 37KW,380V/50HZ
Type of shift is electronic
maintenance free accumulator whose capability is 1.3L using American technology
intensifier is from America
3) For the controller,we research and develop our own professional software, components are as follows:
EVOC brand Industrial Personal Computer and 17BENQ LCD
specialised waterjet cutting software
Omron brand PLC instead of relay
Windows XP based.
Soft packing.
1907 Glass Machinery Suppliers
Short on time? Let Glass Machinery sellers contact you.
