Fuel Energy Resources Suppliers and Manufacturers

100% Namibian Hardwood Charcoal for export. The charcoal is made from hardwood obtained from the clearing of invasive bush on Namibian farms. The invasive bush is cleared as it prevents the proper replenishment of the groundwater reserves in an already arid country. The dense bush prevents the grasslands from being used as grazing for livestock and wildlife. The Blackthorn (Acacia Mellifera) makes up 80% of the packed product. The balance is made- up of Candle Thorn (Acacia Hebeclada) and Mopane (Colophospermum mopane). threatening the indigenous fauna and flora. The particle size ranges from 30mm to 90mm. Charcoal is normally packed in 20kg white WWP. It can also be packed in bags supplied by the client. This would include Kraft paper bags and polyprop bags.

Sekelbos Barkless Firewood Logs 28cm Well-seasoned firewood logs. We harvest dead trees and dead branches from the hardwood Sekelbos tree in the North-West Province of South Africa. This area is commonly referred to as the Bosveld. The tree is classified as an invasive species. The bark naturally comes off due to the harsh sun and arid conditions after two to three years.

Biochar SA Hardwood 1mm>15mm Hardwood charcoal Biochar made from South African Sekelbos. Sekelbos is an invasive species threatening the indigenous fauna and flora. The particle size ranges from 1mm to 15mm. Biochar is normally packed in 20kg white WWP. It can also be packed in branded bags supplied by the client.

Origin: Kazakhstan Quantity: Up to 100000MT per month Trial order is required by prepayment. Tech Specs: 1 Mass fraction of total moisture, % not more than 0.5 not more than 0.5 2 Ash content, %, not more not more than 0.60 not more than 0.60 3 Mass fraction of sulfur, % not more than 2.0 not more than 2.0 4 Mass fraction of coke with a particle size > 6 mm, % not less than 30.0 not less than 30.0 5 True density, g/cm 2.02-2.06 2.06-2.09 6 Mass fraction of silicon, iron, vanadium, %: Silicon: not more than 0.080 not more than 0.080 Iron: not more than 0.080 not more than 0.080 Vanadium: not more than 0.045 not more than 0.045 7 Bulk density, g/cm: not less than 0.86 not less than 0.86 8 Mass fraction of oiling agent, %: not more than 0.50 not more than 0.50

Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60C Maximum 460 micrometers Copper Strip Corrosion (3h @ 50C) Class 1 Oxidation Stability @ 110C Minimum 20 hours FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 microns

Property Specification Appearance Clear and Bright Density @ 15C 820 - 845 kg/m Viscosity @ 40C 2.0 - 4.5 mm/s (cSt) Flash Point Minimum 55C Sulfur Content Maximum 10 mg/kg (10 PPM) Cetane Number Minimum 51 Cold Filter Plugging Point (CFPP) -5C (summer grade), -15C (winter grade) Distillation 95% Recovered Maximum 360C Total Aromatics Content Maximum 11% Polycyclic Aromatics Content Maximum 8% Ash Content Maximum 0.01% by mass Water Content Maximum 200 mg/kg Total Contamination Maximum 24 mg/kg Lubricity, corrected wear scar diameter @ 60�°C Maximum 460 micro Copper Strip Corrosion (3h @ 50�°C) Class 1 Oxidation Stability @ 110�°C Minimum 20 hour FAME (Fatty Acid Methyl Ester) Content Maximum 7% by volume Carbon Residue (on 10% distillation residue) Maximum 0.3% HFRR (High-Frequency Reciprocating Rig) Wear Scar Maximum 460 mi

Property Unit Specification Cetane Number Minimum 51 Density at 15C kgm 820 845 Viscosity at 40C mms 20 45 Flash Point C Minimum 55 Cold Filter Plugging Point CFPP C Varies by climate zone Sulfur Content mgkg Maximum 10 Polycyclic Aromatic Hydrocarbons PAH by mass Maximum 8 Lubricity HFRR m Maximum 460 Distillation Recovery at 250C by volume Minimum 85 Distillation Recovery at 350C by volume Maximum 95 Ash Content by mass Maximum 001 Water Content mgkg Maximum 200

Origin: Kazakhstan or non-Embargo Country Specifications: En590-10ppm, Euro 5 Grade with non-Biodiesel content*** Packaging: Bulk Shipment Delivery Method: FOB, CIF Destination: CIF (ASWP), FOB (Rotterdam, Jurong, Houston, Fujairah, China) MOQ: 50,000 MT/mth (12 mth contract); Trial Lift Available) Note: Price FOB/CIF may vary from listed (slight negotiation possible, depending on order volume)

- Fuel is non-sanctioned; of Kazakh or Azerbaijani origin - Sold by the Gallon (Gal) - MOQ is 50,000,000 Gal/mth (12 mth contract); Trial lift available - Max. Quantity: 100,000,000 Gal/mth - Delivery Method: CIF, FOB - Destination: CIF (ASWP), FOB (Jurong, Fujairah, Houston, Rotterdam, China) - Price: Available once Buyer accepts Refinery SOP's

Origin: Kazakhstan MOQ: 50,000 MT/mth x 12 mths Max. Quantity: 900,000 MT/mth x 12 mths

Origin: Kazakhstan MOQ: 500,000 Bbl x 12 mths Max. Quantity: 5,000,000 Bbl x 12 mths Delivery: CIF/FOB - Spot

Origin: Kazakhstan MOQ: 50,000 MT x 12 mths Max Qty: 300,000 MT x 12 mths

Origin: Kazakhstan MOQ: 50,000 MT x 12 mths Max Qty: 500,000 MT x 12 mths

Origin: Indonesian Types: Sub-bituminous, Lignite (Brown), Bituminous, Anthracite Gross Caloric Value: GAR 7000 - GAR 5000 Moisture Content: 15 - 30% or > Ash Content: 5 - 15% Sulfur Content:

EN590 10 PPM Diesel is in high demand. We are direct mandate. We can supply in large quantity. Procedure for EN590 10 PPM is set by refinery. Please only inquire if you require serious, professional service and guarantee that you will receive EN590 10PPM fuel. NOTE: Refinery procedure is set for 100% success rate of buyer receiving the fuel. We offer CIF and FOB procedure. As market changes everyday, pricing of fuel may be subject to change. We can guarantee you the most competitive pricing for fuel, only if you follow direct refinery procedure. Please note in an international community where different language communication style and cultures can block business transactions. Let's work together to negotiate a successful transaction for you, the buyer.

Topglo Corporation is proud to announce the availability of premium coal from our extensive network of mines in Indonesia and South Africa. Our coal is meticulously sourced and quality-checked to meet the highest international standards, ensuring it fulfills the growing global energy demands. Key features include: Reputable sourcing from our trusted network mines Rigorous quality checks to ensure top-grade coal Variety of grades available to suit diverse needs Global shipping for efficient delivery worldwide.

Our premium shisha briquettes are crafted to deliver an exceptional smoking experience, catering to enthusiasts who demand the best. Known for their superior quality and performance, these briquettes are made from 100% natural materials, typically from sustainably sourced coconut shells or., ensuring an eco-friendly and sustainable product. Long-Lasting Burn: Our shisha briquettes provide an extended burn time, lasting up to 2-3 hours, which reduces the need for frequent replacements during your shisha sessions. High Heat Output: These briquettes deliver consistent and intense heat, perfect for producing thick, flavorful smoke without the need for excessive coal use. Low Ash Residue: Our briquettes produce minimal ash, ensuring a cleaner session and easier cleanup. Typically, the ash content is less than 2-3%, contributing to a purer smoking experience. Odorless and Tasteless: Premium briquettes are designed to be completely neutral, adding no unwanted flavors or odors to the shisha, allowing the natural flavors of your tobacco to shine through. Natural and Eco-Friendly: Made from renewable resources like coconut shells, our briquettes are free from chemicals, binders, or fillers. Theyâ??re a sustainable choice that doesnâ??t compromise on performance. Easy Ignition: Despite their dense composition, these briquettes ignite easily with a quick light and achieve optimal burning temperature swiftly, saving time and effort. Uniform Shape and Size: Consistency in shape and size means our briquettes stack neatly and burn evenly, providing a steady and reliable heat source throughout your session. Safe and Non-Toxic: Our briquettes are crafted to meet international safety standards, free from harmful substances that could affect your health or the environment. High Compression and Density: This ensures the briquettes are durable and less prone to breakage during transportation or handling, maintaining their integrity right up to use. Moisture Resistance: Properly sealed and stored, our briquettes resist moisture absorption, ensuring they light quickly and burn effectively every time. These characteristics set our premium shisha briquettes among the top 20 globally for 2024, meeting the expectations of even the most discerning shisha enthusiasts. Whether you are a casual smoker or a seasoned connoisseur, our briquettes guarantee a consistent, high-quality shisha experience every time.

Our company is an export supplier of WOOD PELLET from Indonesia, we can supply you regularly and for a long period of time, we are looking for trusted buyers, if you are interested please contact us