Dirt (max) %wt - 0.03 TCVN 6089:2004 Ash (Max) %wt - 0.5 TCVN 6088:2004 Nitrogen (Max) wt - 0.6 TCVN 6087:2004 - Volatile Matter (Max) %wt - 0.8 TCVN 6091:2004 Intial Wallace Plasticity (Po) - 35 TCVN 6092:2004 - PRI 60 TCVN 6093:2004 - Lovibond Colour (max) - 6 TCVN 6090:2004 - Mooney Viscosity ML (1'+4')100oC - N/A TCVN 6090:2004
Thickness: 0.03-0.20mm Width: 20mm-1580mm length: 50-2000m/roll (as per customer's requirement) Peel strength: 20-400g/25mm Elongation at break: Machine direction: 180% Transverse direction: 380% Tensile strength: 10MPa Color: Transparent(as per customer's requirement) Backing: PE film Adhesive: acrylic
Another name - ethyl alcohol, alcohol Chemical formula -C2H6O Molecular weight - 46.07 Ethanol can be mixed with white spirit; used as adhesive; nitro paint spraying; solvent for varnish, cosmetics, ink, paint remover, etc.; raw materials for manufacturing pesticide, medicine, rubber, plastic, artificial fiber, detergent, etc.; it can also be used as antifreeze, fuel, disinfectant, etc
Another name - ethyl alcohol,alcohol Chemical formula -C2H6O Molecular weight - 46.07 Ethanol can be mixed with white spirit; used as adhesive; nitro paint spraying; solvent for varnish, cosmetics, ink, paint remover, etc.; raw materials for manufacturing pesticide, medicine, rubber, plastic, artificial fiber, detergent, etc.; it can also be used as antifreeze, fuel, disinfectant, etc
Color index, number : 18 Hot alcoholInsolubile,% : 1.00 Application: 1. The plasticity and castability of heating, combined with its ability to absorb a large amount of infiltrated material, is of great value in the casting industry. 2. The lac resin is non-toxic. Based on the excellent characteristics listed above, the shellac resin is applied to alcohol paints, electrical insulating materials, printing inks, rubber fillers, and its use for oil and acid resistance. 3. Other industries: It has a wide range of important application value in many fields such as medicine, food, cosmetics, chemical industry, metallurgy, machinery, woodware, papermaking, electronics and military industry.
White powder or tiny crystals, inodorous and salty, easily soluble in water, insoluble in alcohol, presenting slightly alkalinity, decomposed when heating. Decomposed slowly when exposed to moist air. Natural soda is firstly dissolved into solution (Na2CO3) and filtrated. The clear solution is then fed to carbonizing tower ; accordingly, CO2 is compressed and bubbled up from the bottom of the tower, After carbonization, the slurry will be flowed from the bottom and separated. Dried to the finished product. Usage: Used as food fermentation, detergent ingredient, carbondoxide foamer, pharmacy, leather, ore milling and metallurgy, detergent for wool, exiting usher and metal heat-treating, fiber and rubber industry, etc.
White powder or tiny crystals, inodorous and salty, easily soluble in water, insoluble in alcohol, presenting slightly alkalinity, decomposed when heating. Decomposed slowly when exposed to moist air. Natural soda is firstly dissolved into solution (Na2CO3) and filtrated. The clear solution is then fed to carbonizing tower ; accordingly, CO2 is compressed and bubbled up from the bottom of the tower, After carbonization, the slurry will be flowed from the bottom and separated. Dried to the finished product. Usage: Used as food fermentation, detergent ingredient, carbondoxide foamer, pharmacy, leather, ore milling and metallurgy, detergent for wool, exiting usher and metal heat-treating, fiber and rubber industry, etc.
PE/PP Tarpaulin None welded width can reach 1.8-4.2 meters and welded width can reach 30 meters. Coating on one side or both sides. According to customers requirements, it is available to add UV inhibitors or fire retardant or others. Laminating all around and using pp rope to strengthen, with Al-eyelets or black corner
Grade - Q235/Q235B/Q345/Q345B/SS400 Technique - Hot rolled/Welded Material - Q195,Q235,Q345,16Mn,20#,45#,A53,A106,St37,St35.4etc thickness - 0.5mm-12mm(+/-0.1mm) OD - 15*15mm-400*400*mm(+/-0.1mm) Length - according to the customer's requirement Surface treatment - Galvanized/ Varnish Painting/Black Painting/Color coated Application - Petrol/gas/water delivery, construction, chimney pot, furniture ,machinery
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
Description 1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration. 2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal. 3. Good oxidation resistance, low tin slag and cost savings. 4. Solder joint is bright, full and uniform. 5. Economical and can produce the lowest consumption of the solid solder joints. Application Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.
Electro welded wire mesh supply In the forms of rolls or panels, for construction, fences and other industrial uses. It enjoys the feature of corrosion resistance, compared with plain welded wire mesh. Mainly used as fencing panels or further fabricated into wire partitions, wire container panels, wire baskets, welded wire fences, poultry fences and other welded products. Type: Electric Wire Mesh Application: Fence Mesh Hole Shape: Square Wire Gauge: 2.0-4.0mm Processing Service: Bending, Welding, Cutting Product name: welded wire mesh Wire diamter: 0.6-5 mm wire space: 50-300 mm Surface treatment: galvanized, PVC coated Width: 500-1500 mm Length: as request Factory certification: ISO 9001
We have uncured rubber compound scrap offer for sell at a very considerable rate a serious buyer should contact us for more details
2,400 10l jars (15.5kg) 37,200 kg (620 Kg / pal) 60 pallets / 40 pots per pallet. 0,70 / kg 26 040 euros Interior / exterior water-based paint Product label in German language EXW (Belgium) Mandatory export outside Europe Extra strong coverage, very easy to paint Toom's high-quality Comfort White impresses with its extra strong coverage and is ideal for interior painting jobs. Emulsion paint is very easy to work with and gives walls or ceilings a matte appearance after drying. It is available in different packaging sizes and certified by "Der Blaue Engel" and "Pro Planet". The paint bucket is also made from 100% recycled material.