French Metal Metal Products Suppliers and Manufacturers

Metal tin is mainly used in the manufacture of alloys. Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment. Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials. Standard ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 , Content Pb â?¥ 99.99 % Density 11.34 g / cm 2 Color Bluish Weight 35 kgs / lump, 55 kgs / lump Dimension 21" x 4" x 2.5" Package Standard Sea-worthy package, fixed by belt per ton Shape Rectangular Lump Application lead-acid storage batteries Ammunition, cable sheathing, and building construction materials counterweights, battery clamps cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil Container Size 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter

1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.

Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.

Thickness as your request 2mm,3mm,4mm,5mm,6mm Size We can build 2M3, 3M3, 4M3, 5M3 6M3 ,8M3, 9M3, 10M3, 12M3 Skip bin and customized bin is available Painting we provide priming painting color,and the final color according to customers' demand, enhancing your company image with great looking bins. Options 1.Prefabricated with top coat finished 2.Prefabricated and hot dipped galvanized 3.Flat packed with premier only 4.Fork slot under floor or inside bins 5.Other requirements like thickness, different steel grade used

Grade - Q235/Q235B/Q345/Q345B/SS400 Technique - Hot rolled/Welded Material - Q195,Q235,Q345,16Mn,20#,45#,A53,A106,St37,St35.4etc thickness - 0.5mm-12mm(+/-0.1mm) OD - 15*15mm-400*400*mm(+/-0.1mm) Length - according to the customer's requirement Surface treatment - Galvanized/ Varnish Painting/Black Painting/Color coated Application - Petrol/gas/water delivery, construction, chimney pot, furniture ,machinery

grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle

Model Number: 314 321 441 430 Type: plate Application: decoration Certification: ISO Tolerance: 1% Processing Service: Bending, Welding, Decoiling, Punching, Cutting Product name: aisi 314 321 441 430 stainless steel sheet Surface: 2B, NO.4 HL available Technique: Cold Rolled Finish Material: Stainless Steel Color: Natural Color Edge: mill Edge/ slit edge Item:ISO9001 Standard Packing: Standard Export Packing Ni:min1%

grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle

Item Standard (%) Results(%) Purity (%) �¢?�¥99.99 99.99 Carbon 0.03 0.03 Coblet

Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% Grade : AA Product Origin ; Netherlands/ Romania Metal : 100% Alloy Or Not : Non-Alloy Color : Multiolor Secondary or not : Non-secondary ed Rails R-50: 51.67 Kg/m �¢?? GOST-7173-75 R-65: 64.72 Kg/m �¢?? GOST-8165-75 Metal : Nonferrous Metal Length : 1meters, 1.5 meters (ideal for melting) 6 meters 12 meters full length (ideal for piling)

Compressor Weight : 2kg, 4kg, 6kg, 8kg, 10kg, and 12kg More Details : 220-240 v 50 or 60 hz. Cooling capacity : 90-190 w displ Size : 5.99 -12.53 cm3 Purity : 99.98% copper inside with connection box

-Scrap Ceramic CPU -Scrap Ceramic CPU with Aluminum Cap -Scrap Black Plastic CPU -Scrap Plastic CPU's -Ceramic Pentium pro -CPU 486 ceramic

Rated Capacity(KVA) Load Loss(KW) No-load Loss(KW) No-load Current(%)

aluminum content 75%, 95%,99.7% Application: 1.mainly used for melting ingot 2.discontinuous melting with scrap 3.easy control and operation 4.fast melting 5.energy saving This Scrap Aluminum is produced in the production of industrial waste.Such as:Scrap Aluminum Wire,Scrap Aluminum block and so on 6.Aluminum alloy production , Steelmaking and requirements of the coating is not high,Fireworks production.

Second Quality Railway Steel HMS2 R50/R65 CODE 730 210 000 000 The rails are brand new and only called used rails because of their anomalous sizes. The rails are cut in different sizes, as they did not pass the test of conformity of measurements due to inequalities. Therefore, rails are not suitable as railway track, but not classified as scrap. we can also provied : rebar steel hot rolled steel sheets Galvanized steel billet steel cold steel Rolled sheets procedure : 1/ Buyer send LOI to the seller. LOI must be from the end buyer and indicates inside the payment method chosen below. 2/Seller issues FCO (available 7 days) 3/Buyer signs FCO and accepts fees proforma invoice indicates all the transaction details agreed after in the SPA and it's the document needed by buyer when start the processus for issuing the deal. 4/Buyer pays fees 1340 $ per ONE million ton to the seller to issu a commercial invoice, please note this amount is refundable after acceptance of the LC by the seller's bank. 5/Paiement terms : By issuing a confirmed LC MT 700 with full amount (confirmed, not delay and irrevocable), as per the proforma invoice�¢??s terms and conditions by the buyer. or issuing a revolving LC MT 760 with the bank guarantee to take all the quantity states on the proforma invoice has to be not less than 20 % of the value of the proforma invoice. Possibility to negociate with DLC. 6/ Seller issues a SPA the buyer must be returned ywith 7 days. 7/ in case of requesting any documents, inspection certificate, etc. property rights, inspection of the goods, requesting a visit or video, the buyer can claim them by sending pre-advice bank draft MT 705, OR among the conditions of the letter of bank credit, confirmed bank, with the full value of the proforma invoice and its conditions

TEM VALUE RESULT(%) - Al Margin - 98.32% Si - 0.20-0.60 % 0.37% Cu - 0.10% 0.09% Mg - 0.45-0.9 % 0.60% Zn - 0.10 % Max 0.10% Mn - 0.10 % Max 0.10% Ti - 0.10 % Max 0.10% Cr - 0.10 % Max 0.10% Fe - 0.35 % Max 0.15% Sum - 0.15 % Max 1.70%

Application: Electric light industry, Machinery manufacturing, Building industry ,defense industry, Other fields Manufacturing industrial .valves and fittings,Instrument sliding bearing. 1.purity 99.97%-99.99% 2.Weight of each sheet: 125kgs (+/- 1%) 3.Net weight of each pallet: 2mts (+/- 1%) 4.Min. weight in each container: 20mts approx. 5.Gross weight of each container: 22.20mts approx. 6.Dimensions: 914*914*12mm Product: Copper Cathodes Grade A (Electrolytic Copper Grade) (LME standards) Standard Cu Cathode-1, purity 99. 99% Dimension: 970 MM X 970 MM X 9 MM Weight of each sheet: 100 kg. we can supply copper cathode Copper Cathode Grade A Purity: purity 99.99%-99.97% min Weight per Sheet:125kg....... Copper Cathode , Cu 99.95% Copper cathode Grade A Cu 99.95- 99.99 % 1.Weight of each sheet: 125kgs (+/- 1%) 2.Net weight of each pallet: 2mts (+/- 1%)