French Motor For Electronic Instruments Suppliers and Manufacturers

Preferred Density Range : 18 to 25kg/ m3 Clean & Dry Unused Off-Cuts : 100% Color : Mixed Foam Skins : None Rebonded Foam : None Bare Skins : None Ester-type Foam : None Hydrophilic Foam : None Laminated Fabric/Foam : None Laminated Vinyl/PVC/Foam : None Reticulated Foam - None Visco-elastic Foam : None Foreign Matter/Contamination : Absolutely None Factory Sweepings : Absolutely None Recycled, Old or Used Foam : Absolutely None Packaging : In compressed by bales Weight: 250 to 300kgs per bale Loading Quantity : 40 High Cube containers can loaded no less than 18,000kgs

Model Number FTS510-N-ac Type OTDR Place of Origin China Brand Name OPWILL Type FTS510-N-ac Wavelength 1310/1550nm Dynamic Range 35/34dB Event dead zone 0.8m Attenuation dead zone 3m Pulse Width 3, 5, 10, 30, 50, 100, 275, 500, 1000, 5000, 10000, 20000 ns Laser VFL Application1 OPM (optional) Application2 OLS (optional) Application3 iOTA (optional)

grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle

The UV laser marking machine is developed by using a 355nm UV laser. This machine uses a third-order intracavity frequency doubling technology. Compared with infrared lasers, the 355nm UV laser has a very small spot, and the marking effect is directly interrupted by a short-wavelength laser. The molecular chain greatly reduces the mechanical deformation of the material. Thermal deformation (cold light), because it is mainly used for ultra-fine marking and engraving. It is especially suitable for applications such as marking, micro-hole drilling of food and pharmaceutical packaging materials, high-speed dicing of glass materials, and complex pattern cutting of silicon wafers.

Product description VFD for biomass burner, biomass gasification burner. For electric cabinet frequency and voltage converting, to meet different countries voltage. Ensure the bioamss burner can work well.

Warranty: 2 years After-sale Service: Online technical support Material: metal Shelf Life:2 years Instrument classification:Class II Safety standard: none Application: Cardiology

Product Name Self-contained positive pressure air breathing apparatus with Electronic pressure gauge Material - Alloy steel Color - Black and White Standard - EN 136 Cylinder volume - 6L Working hours - 55-60mins Working pressure - 30Mpa Used - Firefighting

Description 1. High purity (Sn99.99 Sn99.95 Sn99.90), excellent weldability, good infiltration. 2. Clean, beautiful. After welding, insulation, high resistance, low ionic contamination, PCB board welding residual minimal. 3. Good oxidation resistance, low tin slag and cost savings. 4. Solder joint is bright, full and uniform. 5. Economical and can produce the lowest consumption of the solid solder joints. Application Tin ingot is widely used as a coating material in High precision electronic Products, and other requirments of precision welding products, general electronics, food industry packaging, automotive and electrical industry, and hightemperature resistant products.

Heat Area - 100m2 Dimension(W*H*D) - 450*975*782mm Weight - 70kg Air inlet pipe - 50mm Air outlet pipe - 80mm Auto-burning Time - 13h-27h Fuel Consumption - 0.8-1.8kg/h Efficiency - 90% Hopper Capacity - 20kg Electronic consumption - 100-400w/h Rating voltage - 230v

Color index, number : 18 Hot alcoholInsolubile,% : 1.00 Application: 1. The plasticity and castability of heating, combined with its ability to absorb a large amount of infiltrated material, is of great value in the casting industry. 2. The lac resin is non-toxic. Based on the excellent characteristics listed above, the shellac resin is applied to alcohol paints, electrical insulating materials, printing inks, rubber fillers, and its use for oil and acid resistance. 3. Other industries: It has a wide range of important application value in many fields such as medicine, food, cosmetics, chemical industry, metallurgy, machinery, woodware, papermaking, electronics and military industry.

Specifications Brands: Al99.85, Al99.80, Al99.70 1, Aluminum ingot manufacture. 2, high standard. 3, High quality. 4, Competitive price The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00, Applications: 1. mainly used for melting ingot 2. discontinuous melting with scrap 3. easy control and operation 4. fast melting 5. Used for industry such as automobile,pinning and weaving,electron broadly and so on The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00, and below

Specifications Brands: Al99.85, Al99.80, Al99.70 1, Aluminum ingot manufacture. 2, high standard. 3, High quality. 4, Competitive price The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00, Applications: 1. mainly used for melting ingot 2. discontinuous melting with scrap 3. easy control and operation 4. fast melting 5. Used for industry such as automobile,pinning and weaving,electron broadly and so on The main models are as follows: AL99.90, AL99.85, AL99.70A, AL99.70, AL99.60, AL99.50, AL99.00, and below

1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.

pellet machine, with the advantages of low noise, easy and stable operation, high automation, can make pellet dia size from 6mm to 12 mm and the output capacity from 1.5t/h to 2.5t/h. We can offer you the complete solution for making pellets, from crushing, drying to pelletizing. Features : 1. This machine adopts gear first stage driving system, with ideal drive ratio and enormous driving force, its transmission us stable with low noise, operate simply, no blocking is happened to the machine easily. 2. The maximize design if pinch roller can lower the requirement to moisture content of materials in particle molding. 3. The motor and gear cases are installed at the heavy pedestal, pin coupling is used to realize direct connecting, which can exempt from foundation installation and easy to repair and maintain. 4. The machine is equipped with patented water circulation; the cooling system can be used to control the temperature rising of each part efficiently, to guarantee the continuous, stable, reliable running of the machines. 5. The machine adopts advanced variable frequency motor to feed, which equipped with overload intelligent protection.

Color - White/Yellow Melting point - 62-67 Acid value - 5.0mg/g-8.0mg/g,16.0 mg/g-23.0 mg/g Saponification value - 75.0mg/g-110mg/g Iodine value - 8.0g/100g-13.0g/100g Benzene insoluble - 0.3% 1. Cosmetics: excellent adhesion, permeability and emulsification, widely used in face cream, snow cream, lipstick, hair oil,eyebrow pencil, eye shadow, etc. 2. Food: used by food and family as barbecue oil, cooking wax, and mold release agent for processing Chinese and western dim sum and confectionery. 3. Medicine: widely used as ointment base material, Chinese patent medicine auxiliary material, soft capsule polishing. 4. Other industries: it is also widely used in the electronic industry, electric power industry, printing industry, leather industry, ink industry, oil agent industry and candle industry.

Color - White/Yellow Melting point - 62-67 Acid value - 5.0mg/g-8.0mg/g,16.0 mg/g-23.0 mg/g Saponification value - 75.0mg/g-110mg/g Iodine value - 8.0g/100g-13.0g/100g Benzene insoluble - 0.3% 1. Cosmetics: excellent adhesion, permeability and emulsification, widely used in face cream, snow cream, lipstick, hair oil,eyebrow pencil, eye shadow, etc. 2. Food: used by food and family as barbecue oil, cooking wax, and mold release agent for processing Chinese and western dim sum and confectionery. 3. Medicine: widely used as ointment base material, Chinese patent medicine auxiliary material, soft capsule polishing. 4. Other industries: it is also widely used in the electronic industry, electric power industry, printing industry, leather industry, ink industry, oil agent industry and candle industry.

Application: Electric light industry, Machinery manufacturing, Building industry ,defense industry, Other fields Manufacturing industrial .valves and fittings,Instrument sliding bearing. 1.purity 99.97%-99.99% 2.Weight of each sheet: 125kgs (+/- 1%) 3.Net weight of each pallet: 2mts (+/- 1%) 4.Min. weight in each container: 20mts approx. 5.Gross weight of each container: 22.20mts approx. 6.Dimensions: 914*914*12mm Product: Copper Cathodes Grade A (Electrolytic Copper Grade) (LME standards) Standard Cu Cathode-1, purity 99. 99% Dimension: 970 MM X 970 MM X 9 MM Weight of each sheet: 100 kg. we can supply copper cathode Copper Cathode Grade A Purity: purity 99.99%-99.97% min Weight per Sheet:125kg....... Copper Cathode , Cu 99.95% Copper cathode Grade A Cu 99.95- 99.99 % 1.Weight of each sheet: 125kgs (+/- 1%) 2.Net weight of each pallet: 2mts (+/- 1%)

Metal tin is mainly used in the manufacture of alloys. Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment. Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials. Standard ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 , Content Pb â?¥ 99.99 % Density 11.34 g / cm 2 Color Bluish Weight 35 kgs / lump, 55 kgs / lump Dimension 21" x 4" x 2.5" Package Standard Sea-worthy package, fixed by belt per ton Shape Rectangular Lump Application lead-acid storage batteries Ammunition, cable sheathing, and building construction materials counterweights, battery clamps cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil Container Size 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter