Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
grade 1 copper scrap not mixed with specification C11000 Electrolytic tough pitch Berry Copper (ETP) Content 99.9%. Cu%: 99.9% Element...0.005... (%) Copper..99.9... % (Min.) Lead...0.005.... % (Max.) Bismuth...0.5..% (Max.) Total impurities...0.3..% (Max.) Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%). Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive sexual yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed copper wire and cable, not smaller than No. 16 B & S wire gauge, free of burnt wire which is brittle
Copper and copper alloys (brass, bronze) and aluminum strip , single and dual gauge copper strips for power electronic industry.
Metal tin is mainly used in the manufacture of alloys. Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment. Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials. Standard ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 , Content Pb â?¥ 99.99 % Density 11.34 g / cm 2 Color Bluish Weight 35 kgs / lump, 55 kgs / lump Dimension 21" x 4" x 2.5" Package Standard Sea-worthy package, fixed by belt per ton Shape Rectangular Lump Application lead-acid storage batteries Ammunition, cable sheathing, and building construction materials counterweights, battery clamps cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil Container Size 20Gp - 2.352(width) *2.385 ( Height ) * 5.90 ( Inside length ) Meter 40Gp - 2.352(width) *2.385 ( Height ) * 11.8 ( Inside length ) Meter 40HQ - 2.352(width) *2.69 ( Width ) * 5.90 ( Inside length ) Meter
1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
Chemical Composition: C:0.06 - 0.082% Mn:0.75 - 1.05% SI:0.13 - 0.28% P: Max 0.035% S: Max 0.045% Ar: Max 0.15% Grade : AA Product Origin ; Netherlands/ Romania Metal : 100% Alloy Or Not : Non-Alloy Color : Multiolor Secondary or not : Non-secondary ed Rails R-50: 51.67 Kg/m �¢?? GOST-7173-75 R-65: 64.72 Kg/m �¢?? GOST-8165-75 Metal : Nonferrous Metal Length : 1meters, 1.5 meters (ideal for melting) 6 meters 12 meters full length (ideal for piling)
Brand Name - Aluminum Engine Scrap Model Number - GB/T1196-2002 Type - Aluminum Tense Weight - 25kg Al Content (%) - 99.99% Product Name - Aluminum Engine Scrap Material - Car Engine Color - Silvery White Metal Al (min) - 99%-99.97% Grade - AA; Typical Chemical Composition - Al, Cr, Cu, Fe, Mg, Mn, Si, Ti, Zn Source - All Car Engine Brands Alloy or not - Alloy Quality - Engines are free from dirts, dusts, water, grease and oil Features Free from Nuts, Steel plate, paints
Aluminum alloy.
aluminum content 75%, 95%,99.7% Application: 1.mainly used for melting ingot 2.discontinuous melting with scrap 3.easy control and operation 4.fast melting 5.energy saving This Scrap Aluminum is produced in the production of industrial waste.Such as:Scrap Aluminum Wire,Scrap Aluminum block and so on 6.Aluminum alloy production , Steelmaking and requirements of the coating is not high,Fireworks production.
1.dry charged battery & MF battery 2.Meet all DIN & JIS standard 3.Powerful quick start & long life 4.1-2 year used car scrap battery 2/Product Feature: (1)Maintenance-free operation.there is no need to check specific gravity of the electrolyte or add water to battery during float service life. (2)Low self-discharge rate, small internal resistance. (3)The unique construction and sealing techniques of the battery, add the ABS plastic crust that guarantee leakproof operation in and position with no adverse effect to capacity or service life. (4)With our high quality lead-tin-calcium alloy grids, it has a long usage life and deep discharge recoverability. (5)No pollution and no harm. Drained Lead Car Battery Scraps (Rains) Drained Lead-Acid Battery Scrap (RAINS per ISRI Specifications). Our Acid Battery Scrap on 99.99%. Monthly Supply Capacity: 500 - 1500 metric tons, Type: all kind of scrap batteries, Fe Content: HMS Fe Content (%): 100%) Drained Battery Scrap: Black Packaging Detail: Pallet with shrink wrapping
Tungsten powder, heavy alloy, carbide rods, blanks inserts, tungsten seals.
Nickel alloy wires.
Steel scrap , used rails.Brokerage
Aluminum, copper, urea, steel scrap hms1.
Cereals, oilseeds, nuts, scrap,factory waste for animal feed, animal by product, blco bonny light crude oil, grains and pulses.Shipping
It consist of brass castings, rolled brass, rod brass, tubing brass and miscellaneous brasses free of manganese bronze, aluminium bronze and unsweated radiators or parts, iron dirt and corroded material. Impurities ranging from 2% to 4% maximum. We offer our range at market leading prices. Condition : Used Certification : PSIC Certified, SGS Certified Material : Brass Thickness : 5-10 mm Pack Size : 20-100 Kg Application : Industrial Impurity : Less 3% CIF Price: $3000
Round die stocks : one two & five screws in 3 versions: 1/ all steel and iron forged 2/ steel handles & light alloy body 3/ All light alloy Diameter range: 20.6 to 101.6 mm Specific colors upon request