CE standard full automatic kurkure cheetos making machine This Fried cheetos kurkure niknak processing line can use corn grits instead of the powder material to produce the irregular stick sanack.This extruder is specially designed with one screw only for such cheetos, kurkure, or niknak. After shaped from extruder, the products will be sent into the rotary sifter to take down extra grits sticky on the surface. The waste grits can be collected and used again as raw materials. So this processing line can lower down the production cost. After fried and flavored, the final cheetos or kurkure will be more tasty and crispy.
This Fried cheetos kurkure niknak processing line can use corn grits instead of the powder material to produce the irregular stick sanack.This extruder is specially designed with one screw only for such cheetos, kurkure, or niknak. After shaped from extruder, the products will be sent into the rotary sifter to take down extra grits sticky on the surface. The waste grits can be collected and used again as raw materials. So this processing line can lower down the production cost. After fried and flavored, the final cheetos or kurkure will be more tasty and crispy.
Tortilla chip process line uses corn powder, corn starch, and rice powder as main material which are extruded, punched into triangle, round,square shapes, and then baked and flavored. Such snacks with crispy taste, rich nutrition and digestible structure are very popular with many people all over the world. And most important, the waste punching chip can be reused after grinded into powder, which can greatly reduce the production cost. Flour mixer Screw conveyor Double-screw extruder Puilling machine Cutter Z-shape conveyor Rotary separate sifter Vibrating spreader Elevator Oil curtain fryer Vibrating De-oiler Flavoring line
This process line is one of the newly developed double-screw extruding techniques of our company. The traditional stir-fry handiwork has low efficient and less usable raw materials, and its sanitation and quality are difficult to control. The double-screw extruding technique makes up those lacknesses. It not only can process grain materials, like buckwheat, oats, etc. but strengthen the nutrients to produce multi-functional nutritional healthy food, such as slimming grain powder, buckwheat powder, black sesame paste, red chinese date thick soup, etc.
This process line uses rice as the main raw material, and some other vitamin and mineral material can be chosen as the products required.The material is extruded into rice shape by the double-screw extruder, dried to needed moisture content, and eaten after boiled 5-8min. The extruding technique makes it possible to strengthen the micronutrient in the rice and solidify it. Technical Parameter MODEL Installed power Power consumption Capacity Dimension SLG65-CJ Nutritional rice process line 53.52kw 34.8kw 100~150kg/h 16200, 1200, 2200mm SLG75-A Nutritional rice process line 127.24kw 82.7kw 200~300kg/h 19780 2100 2300mm SLG72-E Instant rice process line 489.77kw 342.84kw 700~900kg/h 59900 90007000mm Flour mixer Screw conveyor Double-screw extruder Cooling vibrater Air conveyor 5-layer electricity dryer
This process line uses potato starch, corn starch as main materials to produce a variety of twice extrusion food in different shapes which are popular in the market, such as crispy pea, shell, screw, square tube, round tube, wave, etc. This process line is characterized by unique technics, rational configuration, high automation and stable performance. It can finish steaming, extruding and shaping in one step without a boiler. The products have similar shapes to the real one and taste crispy and delicious after fried.
This Single -screw fried wheat flour snack processing line uses wheat flour as raw material which is extruded and shaped by the single-screw extruder. The snack will be in different shapes by changing the moulds, such as pizza rolls, shell, screw, ring, star, chip, stick, etc.After fried and flavored, the final snacks will be crispy and tasty. This line has features of continuous working, stable performance, and reasonable design.
Breakfast cereal food is one crispy food which is processed by this line using grist as basic material. It is fast and nourishing food with given structure in granule shape, flake shape and animal shape. Its outstanding characteristic is containing abundant compound carbohydrate and meal fibre. Breakfast cereal can not only strengthen lots of microelement such as vitamin and mineral, but also be added with cocoa powder, sugar powder, honey, and maltos You can enjoy it directly by mixing with coffee, milk, yoghourt or functional drink. Children can eat breakfast cereal as sweet crispy snack.
Pet food process line endues pet food with the amount of nutrition, digestible structure, novel shape, and unique taste to meet with theneeds of modern market. The dog chewing food is extruded into a variety of shapes such as stick, bone, etc. This kind of food not only canprovide nutrition to dogs, like protein, fat, vitamin, etc, but also satisfy the dog nature hobby, benefit to its strong teeth, cleanness of mouth andteeth, and prevents disease
The auto double screw snacks food process line adopts advanced share extrusion technology, which can extrude products with different textures and tastes out of double-screw extruder at the same time. It can produce a variety of core-filling food which are popular in the market, such as fragrant chicken, core-filling rolls, etc. It can also produce nutritional powder, grain gruel and many other snacks by changing moulds and assistant equipments. This automatic process line is of leading level for its superior characters "Normal materials, convenient operation and maintenance, lower power consumption, higher output".
Drink bottle series is applied to package of all kinds of juice, dairy product and carbonated drinks. It can be used as deep processing services like acid etching and printing depended on customers requirements. We have modern production facilities and production technologies. We are equipped with complete range of high-tech automatic production facilities, such as automatic bottle inspection machine and automatic bottle filling machine. Besides, we have grasped many core technologies for glass manufacturing, such as NNPB, triple gob, and light weight. We provide various glass bottles. Or you can send me the photos what you want.
NF-1500 is our best selling, Turkish motored machine. It has 4 kw Turkish motor and Turkish Gearbox, low energy consuming. It has ABB ACS150 Driver. It has double bearing system. It can press optimal 20kg of seeds per hour. Residue Oil in Cake is about 6% percent. You can press up to 60 kg per hour but the residue will increase. Nf-1500 costs 9,250 usd + shipping.
NF-2000 is our best selling,Turkish motored machine. It has 4 kw German motor and German Gearbox, low energy consuming. It has ABB ACS150 Driver. It has double bearing system. It can press optimal 40 kg of seeds per hour. Residue Oil in Cake is about 6% percent. You can press up to 80 kg per hour but the residue will increase. Nf-2000 costs 13,500 usd + shipping.
NF-500 is our best selling, German motored machine. It has 0,75kw German motor and German Gearbox, low energy consuming. It has ABB ACS150 Driver. It has single bearing system. It can press optimal 7 kg of seeds per hour. Residue Oil in Cake is about 6% percent. You can press up to 20 kg per hour but the residue will increase. Nf-500 costs 3250 usd + shipping.
NF-80 has 0.37 kW engine and gearbox. It has ABB ACS150 drivers. It has a double bearing system. It can press optimum 3-4 kg seeds per hour. The residual oil in the pulp is about 6%. You can press up to 8 kg per hour. NF-80 costs 2100 usd + shipping.
The retort sterilizer produced by our company can completely avoid the secondary pollution of food and maintain the original flavor of the food. A small amount of steam consumption can quickly reach the predetermined sterilization temperature. Perfect pressure control can minimize the deformation of product packaging. In addition, our equipment also has the advantages of energy saving, low noise, convenient operation and labor saving. It is your powerful assistant to improve efficiency and gain more profits.
Apllication :Food & beverage products high temerpature high pressure sterilization. Suit for:All kinds of heat resistant and water proof package materials. Such as:pouches,cans,glass jars,plastic containers, etc. Characteristics of spray sterilizer 1. Indirect heating and indirect cooling, the cooling water is not in contact with the process water, which avoids the secondary pollution of food. No water treatment chemicals are needed in the process.The equipment adopts high temperature and short-time sterilization. 2. Reduce steam consumption. The sterilized water after steam atomization is directly mixed in the sterilizer to improve the heating and cooling speed. 3. Low noise, creating a quiet and comfortable working environment. 4. Water is sprayed from different angles, and steam, air and water are mixed and convected to form a perfect temperature distribution. 5. A small amount of process water circulates rapidly to reach the predetermined sterilization temperature. 6. Four movable temperature sensing probes are equipped inside the autoclave, which can monitor the F value of the food center and the heat distribution in the autoclave at any time, and know the heat penetration at any time (the time when the temperature reaches the geometric center of the food from the food surface). 7. Perfect pressure control, the pressure in the whole production process is constantly adjusted to adapt to the changes in the internal pressure of the product packaging, so as to minimize the deformation of the product packaging, especially suitable for product packaged with gas inside. 8. The process water preheating system can ensure that the products with thermal insulation and heat filling are continuously heated up. 9. Softened water is used for sterilization to avoid dirt on the outer package due to the quality of process water. 10. It can save installation space, facilitate operation and save manpower (only need to use the control cabinet for direct operation). 11. It is suitable for the food industry such as beverage, and automatic loading and unloading during mass production. It is more convenient for the automatic configuration of unmanned workshops in the industry in the future.
The machine is widely used in many fields, it can realize the sterilization of all kinds of canned fish, petfood, etc., and all high-temperature resistant packaging. Our equipment is of high quality and low price, which can not only win more customers for you, but also win more profits for you.
HDMS-LSX600P If you have demand, you can contact me at any time. We will reply you as soon as possible. . Welcome to inquire. The product introduce: The ultrasonic cutting assembly line uses ultrasonic energy for cutting and processing equipment to achieve the purpose of cutting food. The ultrasonic vibration of the cutting knife makes the friction resistance very small. It does not require a sharp blade and great pressure when cutting. and will not cause the edge collapse and damage of the cutting material. The cutting surface is smooth and neat, and the cut material is not easy to stick to the blade. For food that cannot be cut by traditional cutting machine, it can also complete cutting work with high standards, especially for frozen, viscous and elastic materials. The machine is designed as a servo driven conveyor belt through system, servo blade actuator, ultrasonic cutting system, interlocking safety protection device, and it is easy to clean. Realizing automatic and continuous cutting. The ultrasonic food cutting line can be used independently or connected to the production line. Advantages of ultrasonic food cutting assembly line: 1. Ultrasonic cutting reduces friction, with fine incision, no debris, no deformation, no cross color, and smooth and beautiful cutting surface. 2. The machine adopts titanium alloy blade, which is completely inert and durable. It is not easy to stick the blade during cutting, and is suitable for cutting sticky and elastic food, multi-layer sandwich cake, etc. 3. The cutting range is wide, such as mousse cake, Swiss roll, dough, egg tarts, candy, cheese, butter, sandwiches, pizza, bread, biscuits, chocolate, pies, nougat, sesame sugar, Shaqima, Napoleon, thousand layer cake, pudding cake, brownie, rice cake, jujube cake nut food, baked food, various cakes, soft, crisp, sticky food, etc. 4. There are many choices for cutting mode, such as sheet, strip, roll, block, etc. 5. The machine can realize continuous cutting, fast cutting speed, automatic and intelligent operation, and save labor costs. 6. The machine can be used as a stand-alone or embedded solution, with dual choices. 7. The machine is stable in working condition, suitable for long time continuous work, and has high working efficiency. 8. In the process of machine cutting, the food to be cut is moved in parallel or in parallel order, which reduces the downtime. 9. Siemens servo control, high durability, low failure rate, accurate positioning, and minimal error in the cutting process. 10. The machine is equipped with sensors to position and cut the products to improve production efficiency. 11. The machine can match a variety of specifications, which can be customized according to customer requirements.
HDMS-MSXT4200 If you have demand, you can contact me at any time. We will reply you as soon as possible. This is our contact information: +86 16632060421. Welcome to inquire. The product introduce�¯�¼? The ultrasonic cutting machine is a device that uses wave energy for cutting and processing to achieve the purpose of cutting food. When the cutting knife is making ultrasonic vibration, the friction resistance is very small, so it does not need a sharp blade and great pressure when cutting. And will not cause the cutting material to collapse and damage. The cutting surface is smooth and neat, and the cut material is not easy to stick to the blade. The ultrasonic blade can be used to cut fresh and delicate baked products. It avoids the time and cost of processing frozen products before segmentation. It can also complete the cutting work with high standards for foods that cannot be cut by traditional cutting machines, especially for frozen, viscous and elastic materials. The machine is equipped with servo driven conveyor and multi axis cutting head, which can cut round cakes into wedge-shaped pieces or whole cakes into square, rectangle, triangle, diamond, parallelogram, hexagon and other shapes. Advantages of ultrasonic food cutting machine: 1.Realize friction free and pressure free cutting mode, with neat and smooth section, no deformation, no slag dropping and no color mixing. 2. The machine adopts titanium alloy blade, which is completely inert and durable. It is not easy to stick the blade during cutting, and is suitable for cutting sticky and elastic food, multi-layer sandwich cake, etc. 3.The cutting range is wide, such as mousse cake, Swiss roll, dough, egg tarts, candy, cheese, butter, sandwiches, pizza, bread, biscuits, chocolate, pies, nougat, sesame sugar, Shaqima, Napoleon, thousand layer cake, pudding cake, brownie, rice cake, jujube cake nut food, baked food, various cakes, soft, crisp, sticky food, etc. 4.The cutting mode is rich, one machine can be used for many purposes, and different shapes can be set, such as round, square, triangle, diamond, roll, sheet, strip, block, etc. 5.This model is equipped with a knife washing slot, which can adjust the interval time of knife washing and automatically wash knives. 6.This model is equipped with safety grating to ensure the safety of operators. 7.The machine is easy to operate and can be operated by anyone. It can cut automatically to reduce the use of labor and greatly save labor costs. 8.The machine is stable in working condition, suitable for continuous working for a long time, and its working efficiency is greatly improved. 9.Siemens servo control features high durability, low failure rate, accurate positioning and minimal error during cutting. 10.The machine can automatically position and cut products to improve production efficiency. 11.The ultrasonic food cutting machine can be customized according to the needs of customers.
