British Filler Material For Pillows Suppliers and Manufacturers

Desulphurisation Slag is an iron slag derived from the desulphurisation skimming process. This material is an iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si), but has a stable chemistry with 75 -80% chemistry. The level of Fe% in the slag has been estimated by water displacement test. This material con offer competitive advantages respect other metal scraps: Price; Stable Chemistry; The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

We are glad to propose 500 MT of stain less steel mill scale. Mill scale is formed on the outer surfaces during by the hot rolling lamination of stainless-steel products. At a visual inspection the material is a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in colour, but it also contains considerable alloying elements such as chromium and nickel. The recovery ratio after melting in furnace for the most valuable alloy elements is: - Ni: 3.5 - 4.5% - Cr: 6-8% From the chemical and physical analysis performed on the scrap, and according to the European environmental rules, the material has been classified as a special non dangerous waste, listed in green list. In particular the mill scale can be classified as follows: Waste code: 10 02 10 The material is stored on cemented flooring, and it can be loaded loose in tipper trucks or containers. Chemical analysis of the material is available on request.

We offer 200 tons per month of tire wire scrap from combustion of used tires. Material has no rubber left. Tire wire is loaded loose in 20' containers (28 tons each).

Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details

The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste. After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container. Please feel free to contact us for further details.

We are proposing about 1000 1200 Mt/ton monthly of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag : 1. >85% Fe Average 600mm Max Fraction 2. >78% Fe Average 20-300mm Fraction The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact

The Aluminium Incinerated scrap is the by-product derived from the reprocessing IBA Incinerator bottom ash). It can be classified as follows: Basel code B1010. EW Code: 17 04 02. With a low melting point at 660'C, on visual inspection, aluminium can be found as melted and re-solidified particles or rocks. This happens to aluminium foil that is converted into small droplets during the incineration process. Some larger and thicker aluminium packaging items can still be partially recognised as they retain their shape. The heterogeneous nature of the processed material is due to the diversified conditions present in the combustion chamber, (some relatively cooler regions in the furnace). The stock can contain all kind of aluminium packing. We can currently provide this material in three different fractions and with different aluminium content: 3-8 mm split in two different qualities: 65% ± 3% Al 85% ± 3% Al 8-16 mm: about 70% ± 3% Al 16-60 mm: about 80% ± 3% Al The material contains minor impurities typically stones, ash, glass. Such components are inherent and adhere to the scrap surface. The total impurities can be sorted, but not fully removed. The collected stock is stored in warehouse on cemented flooring. It can be loaded loose in 20' Feet heavy duty container.

We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us

The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.

Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00

HDPE Blue Drum Regrind consists of HDPE regrind from blue drums scrap (Extrusion Grade Blow Moulding Grade). Cold Washed Clean without any contamination. Packed in jumbo bags for easy loading. We have convenient trade terms and the fastest delivery schedules. what is advantage of hdpe? This strengthening with its UV-resistance makes it ideal for piping and outdoor applications. Pipe grade sheet has the ability to withstand -220 to 180 degrees Fahrenheit. It�¢??s durable in most chemical interactions which make it useful in a lot of industrial applications. HDPE drums regrind 1.Hot water washed and no label, no any contaminant 2.dry and clear flakes 3.white,blue, red, yellow and so on 4.from crates, drums, pallets 5.MFI 0.03-0.1 Specification HDPE Blue Drum Regrind ITEM STANDARD Melt Flow Rate(g/10min) 0.1 Density(g/cm3) 0.95 Power Ash% 0.01 Tensile Strength(MPa) 22 Elongation At Break% 600 Environmental stress-cracking 1500 We are leading trading company, suppliers/exporter of best grade Plastic scraps in South Africa. We are one of the largest exporter of Plastic Scraps. We provide top grade quality to our Buyers. hdpe blue drum price There are several suppliers in the market with each supplier with their own price. The price varies between $300 and $500 per ton . At vitameta ltd we offer best price on bulk order purchase SPECIFICATION: Plastic Scraps Products PET Bottles Scrap LDPE Film Scrap PET Flakes Scrap HDPE Scrap Unvulcanised Rubber Scrap PET Film Rolls ABS Scrap PP Raw Materials EPS Block Scrap E-Waste Products: PVB film scrap LDPE rolls Baby Diapers PU Foams HDPE Granules Our HDPE Blue Drum Flakes are high in quality and relatively low price. We wish to make a long term scrap business deal with reliable and stable Plastic Scrap buyers from all over the world. Interested Plastic Scrap buyers, please contact us today for scrap prices and further details. We are waiting to hear from you soon. Thank you for your time. We offer products like Hdpe Milk Bottles Scrap, Hdpe Milk Bottle Regrind, Virgin Hdpe Granules / Recycled Hdpe Granules, Hdpe Blue Drum Regrind, and Blue PC water Bottle Scrap 99.99% Pure. We are wholesaler dealers of HDPE Blue Drum Regrind, HDPE blue drum flakes supplier. Adding to that We grind HDPE plastic, scraps and sell them domestically and Internationally. Furthermore, We can separate the regrind by color if you want that. Below are some of our HDPE regrind. Moreover, They are ground from crates, barrels, buckets, lids, pipes, plates, bottles and others. Lastly, We sell HDPE CLEAR/NATURAL REGRIND (CLEAN AND WASHED) contact us.

Product pictures Properties: PP has the advantages of excellent comprehensive properties, good chemical stability, good shape processing performance and relatively low cost. PP can adapt to a wider range of application requirements through modifying, copolymerization, grafting,blending, reinforced filling, transparency, filling, weather resistance. Commonly used reference for Pp grade (due to market factors and production schedule, the actual model may be different, please contact us for specific grade confirmation) Category Grade MFI Density Major Applications Homopolymer - Extrusion F103 3.3 0.9 BOPP Film Grade - General Purpose, Lamination & Metallizable films T30S 3.3 0.9 Raffia Tapes ,Woven Sacks for Packaging Fertilizers, Cement, Polymers, Carpet Backing ,FIBC etc. T103 3.3 0.9 Thermoformed Cups, Containers & Other disposable items F110 11 0.9 TQ and Cast Films for General Purpose Packaging etc. Homopolymer â?? Injection Molding M103 3 0.9 General Purpose Injection Molding M106 6 0.9 General Purpose Injection Molding M108 8 0.9 General Purpose Injection Molding M110 10 0.9 General Purpose Injection Molding, Furniture etc. Impact Copolymer â?? Injection Molding M304 3.5 0.9 Automotive Components, Crates, Pails, Furniture etc. M307 7 0.9 General Purpose Injection Molding M310 10 0.9 Battery Boxes M311T 10 0.9 Compounding, Automotive Components, Luggage and Industrial Components M312 12 0.9 Compounding, Industrial Components, Automotive Components, Luggage, Pails, Houseware, Sanitary Wares etc. M315 15 0.9 General Purpose Injection Molding M325 25.0 0.9 Compounding, Automotive Components, Houseware, Appliances parts, Extrusion Coating M340 40 0.9 Appliance & White Goods, Automotive component, Compounding,TWIM Random Copolymer â?? Blow Molding B202S 1.9 0.9 Bottle & Containers for Medical and Transparent Products (e.g. IV Fluid Bottles) etc B200 1.9 0.9 General Purpose Blow Molded & Thermoformed Items, Sheets for Files & Folders. M212S 12 0.9 High Clarity Containers, Household items,Injection Syringe, Laboratory products & ISBM Bottles