Glass Fiber Covered Flat Wire:
The Glass in Fibre Glass Covered Insulated Rectangular Flat Aluminium Wire may be applied in woven tape form or as a continuous fibre. It has proved to be an efficient insulation providing coil winders with higher thermal stability, adequate electrical properties and good resistance to abrasion after varnishing. The glass is bonded with a varnish for dielectric strength to improve mechanical properties.
Application:
Fibreglass lapped conductors (bare or enamelled) are very suitable for wingdings of electric motor stators, generators, special transformers and high voltage motors. In general this insulation can be applied where high mechanical strength and high insulation properties are required. It exhibits a very high degree of mechanical and thermal stability.
carbon fiber oval tube Quality index:
- Raw Material :Imported Taiwan or Japan Carbon fiber fabric
- Lay up :Both Sides 3K +Middle UD Carbon .
- Item PAN based Viscose based
- Dencity g/cm 30.09-0.150.05-0.09
- Carbon content%â?¥90â?¥90
- Ash content%0.8-1.01.3-1.6
- Area weight g/CM 2100-500100-500
- Heat conductivity W/M.K0.1040.034
carbon fiber oval tube Material characteristic:
- Strengthening material for C/C compound material.
- Filtration material under high temperature and for caustic liquid.
- Electric conduct material, electrode.
- Static electricity resistance.
Fiberglass duct rodder is selected as a special tool for pulling electric cables and optical fibre cables in telecom, power industries, buildings and many other fields. The rod is made of fiberglass and high strength resin at high temperature, it is coated by high density polyethylene engineering plastic as its protected layer, which makes the duct rodder cover sliding on surface, durable, corrosion resistant and has good insulation performance, these make it safe for using in cable occupied duct. Along with pull head and handcart, it features easy to move and operate. The Fiberglass duct rodder will be equipped with different size of reels in accordance with the length of the rod, there are wheels on the reel to make it convenient for moving, it is an ideal tool for laying cables
Insulator core rod made of ECR fiberglass reinforced the epoxy resin.Insulator core rods also are also called fiberglass rod,FRP rod,GRP rod,fiberglass bar,Insulation rod,fiberglass stick ,ECR rod and so on.
1.Standard: IEC61109
2.Material: E glass and epoxy resin.
3.Process: Continuous pultrusion.
For more detail,
No.Descriptionvalue
1type dde15kv/70kn
2standard iec61109/ansi c29.13
3core pultruded fiberglass rod
4housing htv silicone rubber
5metal end fitting forged steel hot dip galvanized
6rated voltage 15kv
7power frequency flashover voltage (dry)90kv
8power frequency flashover voltage (wet)65kv
9critical impulse flashover voltage (pos)140kv
10critical impulse flashover voltage (neg)156kv
11max riv
we are the professional manufactory of Chopped Strand Mat, we have 1800 tons capacity per month and three production line , we can produce 100-900 gsm form width 15mm to 3600mm. as the only one fiberglass manyfactory in Thailand , most of our product sales to Euro markat
Raw Materials: Fiberglass Solid Epoxy resin
Diameter: 12mm, 16mm, 18mm, 20mm, 26mm , 30mm, 36mm, 40mm, 45mm, 60mm, 80mm, 110mm .
Length: as per the customer's request
Application: For Electric Industry
Raw Materials: Fiberglass Solid Epoxy resin Diameter: 12mm, 16mm, 18mm, 20mm, 26mm , 30mm, 36mm, 40mm, 45mm, 60mm, 80mm, 110mm . Length: as per the customer's request Application: For Electric Industry
Carbon fiber modification on engine hood,empennage, surrounding surface, car handle, rotary plate, ect,. is the desire of car fans. Car fans are bothered by this problem any more after the carbon fiber vinyl come out as its price is lower and easy to operate
Model : K9291, K9292, K9293, K9296, K9297
Material
Size : 127cm × 50M
Fabric : 0.09mm
Glue : 30µ
paper : 140g.
Chopped Strand Mat
Fiberglass Chopped Strand Mats are non-woven fabrics consisting of randomly distributed chopped strands held together with a powder or emulsion binder.
Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, FRP roof shoot, Autonitive parts, bathroom equipment and cooling towers.
Product Features
1.Uniform density ensures consistent fiberglass content and mechanical properties of the composites products.
2.Uniform powder distribution ensures good mat integrity, little loose fibers and small roll diameter.
3.Excellent flexibility ensures good moldability with no spring-back at sharp corners.
4.Fast and consistent wet-out speed resins and rapid air release reduce resin consumption, improving manufacturing costs, productivity and mechanical properties of the end products.
5.The composite products have high dry and wet tensile strength and good transparency.
General Data
Binding type : Powder or Emulsion;
Densily : 85-900g/m2;
Width : Max.3300mm, Tapes available.
Edge : 1 or 2 untrimmed edge available upon request.
Surfacing Tissue mainly used in the surface layers of FRP products. It features even Fiber distribution, soft feel, level and smooth fiber surface, less glue content, quick resin soak and good pattern fitness. It can improve the product surface property on corrosion resistance, compressive strength, seepage resistance, and longer service life. It is also suitable for spraying; pattern pressing and other FRP pattern technology.
Packaging
Product is manufacture in form of a roll wrap on a paper tube then after packed in a plastic bag and placed with in a cardboard carton. Rolls can be loaded in a container directly or on pallets.
Stroge
Should be stored in dry, cool, clean and rain-proof area. Recommended temperature range of storage is between 10~30 and relative humidity between 50%~75%.
3-D spacer fabric construction is a newly developed concept . The fabric surfaces are strongly connected to each other bv the vertical pile fibers which are interwoven with the skins . Therefore, lhe 3-D spacer fabric can provide good skin-core debonding resistance, excellent durability and superior integrity. In addition, the interstitial space of the construction can be filled up wilh foams to provide synergistic support with vertical piles. These products have broad application prospects in automobile, Iocomotive, aerospace, marine, windmills, building and other industries.
Product Characteristics
The 3-D spacer fabric consists of two bi-directional woven fabric surfaces, which are mechanically connected with vertical woven piles. And two S-shaped piles combine to form a pillar, 8-shaped in the warp direction and 1-shaped in the weft direction.
The 3-D spacer fabric can be made of glass fiber, carbon fiber or basalt fiber. Also their hybrid fabrics can be produced.
The range of the pillar height:3-50 mm, the range of the width:3000 mm.
The designs of structure parameters including the areal density, the height and distribution density of the pillars are flexible.
The 3-D spacer fabric composites can provide high skin-core debonding resistance and impact resistance and impact resistance, light weight. high stiffness, excellent thermal insulation, acoustic damping, and so on.
Total weight: 590 g/m2
Thickness: 0.4 mm
Color: Grey
Fire resistance: Yes
Working temperature: -50 to +260
Coating: Silicone Coated On Both Sides.
Standard widths: 1000mm, 1270mm, 1550mm,3200mm(MAX)
Price: FOB Shanghai, $3.16/sqm
Typical Applications:
Welding & Burning Safety Blankets & Curtains
Furnace High Temperature Insulation
Flange & Valve Covers
Furnace Curtains
High Temperature Composites
Thermocouple Insulation
Fuel line insulation
Stress Relieving Insulation
50Meters 1 Roll,
1 Roll 1 Box,
20 Boxes 1 Pallets
15 Pallets 1x20 FT Container,
More than 28,900 Square Meters
Technique: Needle Mat
Dimensions: 133kg/m3
Mat Type: Stitch Bonding Chop Mat
Fiberglass Type: E-Glass
Brand Name: Jotex
Model Number: JH1000-25
Width: 1000mm
Thickness: 25mm
Density: 130--138kg/m3
Color: White
Coating: Available
MOQ: 1000Meters
Payment Terms: T/T;L/C
HS Code: 701950
Roll Length: 10 Meters
Delivery time: 10 Days
Working temperature: -50degree to +1000degree celsius
10 Meters per Roll
10 Rolls per Pallet
20 Pallet per 40HQ Conainer
200 Rolls per 40HQ Container
4800 Square Meters per 40 HQ Container
