1.Material:polyester with fiberglass. 2.Specifications:120g/smí¬250g/sm. 3.Color:white and green. 4.Character:better tensility, elongation and hot shrinkage, high strength for preventing thrust, anticorrosion and anti-aging. 5.Application: 1).An ideal substrate material for asphalt roofing rolls and shingles. 2).An excellent basic material for waterproofing membrances. 3).Act as the lining for roof insulation layers to protect polyester foam insulation from the damaging effect caused by chemical solvents in bitumen so as to prolong the lifetime of heat insulation layer. 4)used for storing water pool, flooring, underground bridgeí»s surface, waterproof project, and corrosion resistance in indoor ground building bases. Polybag
It is an ideal reinforcement materials used for bituminous waterproof membrance. Materials:cotton/fiberglass mesh Usage:widely used in flooring, underground bridgeí»s surface and waterproof projectú¼antiseptic conduct of the buildingsí»base.
The fabric is made from c-glass or e-glass woven roving as its basis material, then is treated by alkali-resistant macromolecule latex. Coated by acrylic acid copolymer liquid. The properties of good alkaline resistant, good cohesion, flexibility, tensile strength, etc. Used:it can also reinforce cement, plastic, bitumen, plaster, marble, mosaic.Used in out-side wall heat insulation, roof waterproof and it is an ideal engineering material in construction.
Fiberglass mesh is made by C-glass or E-glass fibers woven roving as its basis material, and then treated with Acrylic Acid Copolymer liquid. An ideal construction engineering material, Alkali Resistant Fiberglass Mesh fabric is mainly used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications. Specifications: Opening Sizes: 3x3mm, 4x4mm, 4x5mm, 5x5mm,6x6mm, 8x8mm, 10x10mm Weight: 60 - 350g/m2 Width:1-2m Color: blue, orange, white, yellow, etc. Packing: shrink film then carton or woven plastic bag. Features: í-Excellent alkaline resistance and corrosion resistance í-High tensile strength and impact resistance í-Good dimensional stability and deformation resistance í-Good adhesion with resins and water resistance í-Temperature stability and flame resistance í-Soft, flexible and well arranged, simple and easy to apply í-Resistance to aging í-Durable, versatile and cost-effective Uses: fibergass mesh is widely used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications. Self-adhesive Fiberglass Mesh Tape: Is woven from fiberglass bulk yarn then coated with anti-alkaline resin and gum solution cut from a special machine. It could used on reinforcing wall cracks,board cracks,plasterboard cracks and marble cement,in addition to repairing drywall joints. Features: 1.It is a kind of woven fiberglass,alkali-resistant netlike fabric that has been coated with adhesive and cut into the required sizes 2.Sizes:50mm*20m,50mm*45m,50mm*90m,50mm*150m Etc. 3.Ideal material to repair damaged dry wall,cracks and holes 4.Very easy and quick to apply it 5.Packing:one roll with shrink film packing or plastic bag. Then 24 rolls or 54 rolls or 72 rolls for one carton or pallet
Fiberglass mesh is made by C-glass or E-glass fibers woven roving as its basis material, and then treated with Acrylic Acid Copolymer liquid. An ideal construction engineering material, Alkali Resistant Fiberglass Mesh fabric is mainly used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications. Specifications: Opening Sizes: 3x3mm, 4x4mm, 4x5mm, 5x5mm,6x6mm, 8x8mm, 10x10mm Weight: 60 - 350g/m2 Width:1-2m Color: blue, orange, white, yellow, etc. Packing: shrink film then carton or woven plastic bag. Features: í-Excellent alkaline resistance and corrosion resistance í-High tensile strength and impact resistance í-Good dimensional stability and deformation resistance í-Good adhesion with resins and water resistance í-Temperature stability and flame resistance í-Soft, flexible and well arranged, simple and easy to apply í-Resistance to aging í-Durable, versatile and cost-effective Uses: fibergass mesh is widely used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications. Self-adhesive Fiberglass Mesh Tape: Is woven from fiberglass bulk yarn then coated with anti-alkaline resin and gum solution cut from a special machine. It could used on reinforcing wall cracks,board cracks,plasterboard cracks and marble cement,in addition to repairing drywall joints. Features: 1.It is a kind of woven fiberglass,alkali-resistant netlike fabric that has been coated with adhesive and cut into the required sizes 2.Sizes:50mm*20m,50mm*45m,50mm*90m,50mm*150m Etc. 3.Ideal material to repair damaged dry wall,cracks and holes 4.Very easy and quick to apply it 5.packing:one roll with shrink film packing or plastic bag. Then 24 rolls or 54 rolls or 72 rolls for one carton or pallet
Fiberglass mesh is made by C-glass or E-glass fibers woven roving as its basis material, and then treated with Acrylic Acid Copolymer liquid. An ideal construction engineering material, Alkali Resistant Fiberglass Mesh fabric is mainly used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications. Specifications: Opening Sizes: 3x3mm, 4x4mm, 4x5mm, 5x5mm,6x6mm, 8x8mm, 10x10mm Weight: 60 - 350g/m2 Width:1-2m Color: blue, orange, white, yellow, etc. Packing: shrink film then carton or woven plastic bag. Features: í-Excellent alkaline resistance and corrosion resistance í-High tensile strength and impact resistance í-Good dimensional stability and deformation resistance í-Good adhesion with resins and water resistance í-Temperature stability and flame resistance í-Soft, flexible and well arranged, simple and easy to apply í-Resistance to aging í-Durable, versatile and cost-effective Uses: fiberglass mesh is widely used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications. Self-adhesive Fiberglass Mesh Tape: Is woven from fiberglass bulk yarn then coated with anti-alkaline resin and gum solution cut from a special machine. It could used on reinforcing wall cracks,board cracks,plasterboard cracks and marble cement,in addition to repairing drywall joints. Features: 1.It is a kind of woven fiberglass,alkali-resistant netlike fabric that has been coated with adhesive and cut into the required sizes 2.Sizes:50mm*20m,50mm*45m,50mm*90m,50mm*150m Etc. 3.Ideal material to repair damaged dry wall,cracks and holes 4.Very easy and quick to apply it 5.Packing:one roll with shrink film packing or plastic bag. Then 24 rolls or 54 rolls or 72 rolls for one carton or pallet.
Fiberglass mesh is made by C-glass or E-glass fibers woven roving as its basis material, and then treated with Acrylic Acid Copolymer liquid. An ideal construction engineering material, Alkali Resistant Fiberglass Mesh fabric is mainly used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications. Specifications: Opening Sizes: 3x3mm, 4x4mm, 4x5mm, 5x5mm,6x6mm, 8x8mm, 10x10mm Weight: 60 - 350g/m2 Width:1-2m Color: blue, orange, white, yellow, etc. Packing: shrink film then carton or woven plastic bag. Features: í-Excellent alkaline resistance and corrosion resistance í-High tensile strength and impact resistance í-Good dimensional stability and deformation resistance í-Good adhesion with resins and water resistance í-Temperature stability and flame resistance í-Soft, flexible and well arranged, simple and easy to apply í-Resistance to aging í-Durable, versatile and cost-effective Uses: fibergass mesh is widely used to reinforce cement, plastic, bitumen, plaster, marble, mosaics, roofing, interior and exterior walls, and in other industrial applications. Self-adhesive Fiberglass Mesh Tape: Is woven from fiberglass bulk yarn then coated with anti-alkaline resin and gum solution cut from a special machine. It could used on reinforcing wall cracks,board cracks,plasterboard cracks and marble cement,in addition to repairing drywall joints. Features: 1.It is a kind of woven fiberglass,alkali-resistant netlike fabric that has been coated with adhesive and cut into the required sizes 2.Sizes:50mm*20m,50mm*45m,50mm*90m,50mm*150m Etc. 3.Ideal material to repair damaged dry wall,cracks and holes 4.Very easy and quick to apply it 5.packing:one roll with shrink film packing or plastic bag. Then 24 rolls or 54 rolls or 72 rolls for one carton or pallet
Fiberglass sunshade fabric is made of quality filamentary pvc coating fiberglass yarn by special weaving technique. Fiberglass sunshade fabric has plain and neat appearance, good season-fitting, steady and soft color. Fiberglass sunshade fabric is the first choice for home, hotel, and offices to prevent sunshine. Fiberglass sunshade fabrics are mainly used in construction and decoration. Fiberglass sunshade fabric has the properties of alkali-resistance and high tensile strength. This will bring people a comfortable feeling and comfortable life. Color: black, gray, gray-white mix. White, length: 30m--300m. Width: 2m, 2.2m. Carton or box.
Features and benefits: Strong non-conductive fiberglass rod construction. Rustproof bull-nose pulling eye. For longer conduit runs and underground duct. Rugged tubular steel reel with adjustable positioning. Feed device allows rod to feed out or be wound back onto reel with easy push or pull of rod. Many applications, both commercial and residential. 8pics 300kg 1350*480*1500.
"DD Fiberglass" fiberglass wikipedia; Fiberglass woven roving specs: Glass type: E-glass, C-glass; Area weigh: from 200g/m2 to 160g/m2; Width: 1m; etc film, carton, pallet
Ar-fiberglass mesh: 1. Mesh size: 5mm*5mm; 2. Area weight: between 80 to 160g/m2, such as 80, 145, 160, etc; 3. Width: 1m; 4. Roll length: 50m; Woven roving 1. Glass type: e-glass and c-glass; 2. Area weight: 200; 400; 600; 800g/m2; 3. Width: 1m; Chopped strand mat 1. Glass type: e-glass and c-glass; 2. Area weight: 300; 450; 600g/m2; 3. Width: 1040, 1250, 1270mm; 4. Binder type: powder and emulsion; 5. Roll weight: 30-35kg/roll; Film, carton
Characteristic of products: composite by styrene-acrylic emulsion, the products has generous texture, firmly node, suitabale flexibility as well as acid alkali resistant and anti aging. 4*4, 100g/m2, shrink wrapping bag packing, then in carton.
Coated alkaline resistent fiberglass mesh specs Mesh size: 5mm*5mm; Area weight: from 80 to 160g/m2; Width: 1m; Color: white, blue, yellow, red, etc. Film, carton, pallet
"DD fiberglass" Fiberglass chopped strand mat Glass type: e-glass, c-glass; Area weight: 150, 225, 300, 450, 600g/m2; Width: 1040mm, 1250mm. Binder: powder, emulsion. Film, carton
Coated alkaline resistent fiberglass mesh Fiberglass mesh specs: Mesh size: 4mm*4mm; 5mm*5mm; 10mm*10mm; Area weight: between 80 to 160g/m2; Width: 1m; Roll length: 50m; Color: white, blue; Other specs are also available. Film, carton, pallet
Fiberglass stitched mat is made from chopped fiberglass strands or woven roving which is cut into a certain length and randomly dispersed , laid on a roving matrix then stitched together with organic fibers. Fiberglass stitched mat is used in unsaturated polyester resin strenthen, primarily in pultrusion, rtm, filament winding and hand lay-up processed. Such as pultruded parts, pipes, storage tanks, wind generator blades and other frp products. Product properties: 1. Even thickness, high wet tensile strength retention 2. Directional properties and strengths same to woven roving 3.Enough hollows on surface to make it good permeability 4. Flexibility to design variety weaving structures 5. Stable structure required to achieve maximum tensile strength properties. Shrink film packing and sealing and then package them with carton.
Our complex-technology is pultrusion.We can supply FRP(CARBON)rods(0.8mm-48mm),tubes(diameter2mm, inner diameter1mm or more) FRP bars.
Fiberglass screen Fiberglass insect screening is woven from pvc coated single fiber. Fiberglass insect screening makes ideal material in industrial and agricultural buildings to keep away fly, mosquito and small insects or for the purpose of ventilation. Fiberglass insect screen offers excellent properties of fire resistance, corrosion resistance, heat resistance, easy cleaning, good ventilation, high strength, stable structure.
K grade, A grade, AA grade.
K grade, A grade, AA grade.
