Aspen FSK Tape 2"/3"/5"/6" x 20-40 yards 16Roll per Bundle
We are FiberTech India, Everything in Fiberglass we are into manufacturing of Fiberglass decorative products
FRP,also known as GRP,is a fibrous reinforced plastic. The advantages are :high strength,light weight, corrosion resistance,aging resistance,fire resistance, non-conducting,insulation and low recycling.It can replace steel manufacturing machine parts and cars,ship shells and so on. we are a manufacturer of a wide range of FRP products in china, which we export worldwide. Our main products are fiberglass covering parts in different fields, such as construction machinery,agriculture and livestock machinery,medical instrument, bathroom solutions and so on. our products include fiberglass engine cover,fiberglass bathroom unit,SMC fiberglass,fiberglass roof, etc. We can also produce the items as per your models. We have OEM experience and the experience in making both SMC and hand lay up products. Our main customers are:VOLVO,JCB,DOOSAN,SCHWING,etc.
We are a manufacturer of a wide range of FRP products in China, which we export worldwide.Our main products are parts of construction machinery, such as engineer hood, bumper,hood,fender,sunshading board and so on. We can also produce the items as per your models. FRP,also known as GRP,is a fibrous reinforced plastic.Light and hard,non-conducting,high mechanical strength,low recycling and corrosin resistance.It can replace steel manufacturing machine parts and cars,ship shells and so on.
Product Information: The fiberglass knitted stitched felt is made by cutting the fiberglass raw yarn into a certain length, randomly and uniformly distributed, and then stitched with stitching thread. It's mainly applied to fiberglass pipes, pultrusion profiles and insulation materials. Weight(g/m2): 300g/m2~1800g/m2 Width(mm): 100mm-3900mm. Also can select to add the Polyester veil (30g/40g) or chopping layer(300g) according to the customer's requirement. Product Specifications CMK300: C-glass, 300±20g/m2, 100-3900mm Width; CMK380: C-glass, 380±20g/m2, 100-3900mm Width; EMK250: E-glass, 250±10g/m2, 100-3900mm Width; EMK300: E-glass, 300±15g/m2, 100-3900mm Width; EMK380: E-glass, 380±15g/m2, 100-3900mm Width; EMK450: E-glass, 450±20g/m2, 100-3900mm Width; EMK600: E-glass, 600±25g/m2, 100-3900mm Width; Applications: It's mainly applied to fiberglass pipes, pultrusion profiles and insulation materials. Packaging Information: It is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or kraft paper. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets.
Product Information: Fiber glass cloth is a multi-directional reinforced fabric made of glass fiber yarn, with plain weave, twill weave, satin weave. Fiberglass cloth is an engineering material, which has the excellent merit such as anti-burns, anti-corrosion, stable-size, heat-isolation, minimum elongated shrinkage, high intensity. 1. Suitable for reinforced unsaturated resin, vinyl resin, epoxy resin, phenolic resin 2. Widely used in hand lay-up, pultrusion, winding and vacuum infusion and other processes 3. This new material product has already covered many domains such as electric appliances, electronic, transportation, chemical engineering, architectural engineering, heat insulation, sound absorption, fire prevention and environmental protection, etc. Terminal products include: pultruded profiles, auto parts, yachts, pipes, plates, sports equipment, wind energy blades and other FRP products. Product Specifications EW25: 25±1g/m2, 100-3200mm Width, Plain; EW50: 50±2g/m2, 100-3200mm Width, Plain; EW80: 80±3g/m2, 100-3200mm Width, Plain; EW100: 100±3g/m2, 100-3200mm Width, Plain; EW135: 135±4g/m2, 100-3200mm Width, Plain; EW160: 160±5g/m2, 100-3200mm Width, Plain; EW200: 200±6g/m2, 100-3200mm Width, Plain; EW300: 300±9g/m2, 100-3200mm Width, Plain; EWT100: 100±3g/m2, 100-3200mm Width, Twill; EWT135: 135±4g/m2, 100-3200mm Width, Twill; EWT160: 160±5g/m2, 100-3200mm Width, Twill; EWT200: 200±6g/m2, 100-3200mm Width, Twill; EWT300: 300±9g/m2, 100-3200mm Width, Twill; EWS300: 300±9g/m2, 100-3200mm Width, Satin; Product Properties: 1.High intensity and quick wet out 2.Anti-corrosion and electric insulation Packaging Informationï¼? It is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or woven bag. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets for Fiberglass stitched mat.
Product Information: Fiberglass Chopped Strand Mat is made by chopping continuous strands into unit length chopped strands which to be spread out randomly and evenly, then bonding them together with powder or emulsion binder. Chopped Strand Mat is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost. It is used primarily for hand lay-up process, filament winding process and press molding of FRP products. It is suitable for the application by hand lay-up FRP molding, such as, various sheets and panels, boat hulls, boat tubs, cooling towers, corrosion resistant, vehicles, etc. Normal width is 1040mm/1270mm, but also can produce it according to your requirements. Product Specifications EMC100: Powder/Emulsion, 100±8g/m2, 1040/1270/2080 3600mm Width; EMC150: Powder/Emulsion, 150±12g/m2, 1040/1270/2080 3600mm Width; EMC225: Powder/Emulsion, 225±15g/m2, 1040/1270/2080 3600mm Width; EMC300: Powder/Emulsion, 300±15g/m2, 1040/1270/2080 3600mm Width; EMC380: Powder/Emulsion, 380±18g/m2, 1040/1270/2080 3600mm Width; EMC450: Powder/Emulsion, 450±20g/m2, 1040/1270/2080 3600mm Width; EMC600: Powder/Emulsion, 600�±25g/m2, 1040/1270/2080 â?3600mm Width; Product Advantages: *Short strands of fibers held together by a styrene binder *Builds up thickness quickly *Very economical and offers good stiffness. *Conforms to tight curves and corners *Can be torn of cut to size *Low cost and easy to use Packaging Information Fiberglass stitched mat is wound onto paper tube and then wrapped up with plastic film, which can be packed in a cardboard box or kraft paper. The rolls are to be horizontally placed rolls can be loaded into container directly or on pallets for Fiberglass stitched mat.
Product Information: Carbon Fiber Surface Mat is a non-woven tissue made from randomly oriented carbon fibers distributed in special binder by a wet lay process. It's a new super carbon material, with properties of high performance reinforced, high strength, high modulus, fire resistant, corrosion resistant, fatigue resistant composites. It's mainly applied to aerospace, medical instrument, sports equipment, conductivity, anti-static, and anti-spark properties and car parts etc. Product Specifications C-FM10: 10±1g/m2, 100-1300mm Width, Resistance()
It is made of randomly yet evenly distributed chopped strands fiber of 50mm or 100mm length stitched by polyester thread. It has high tensile strength and is recommended for Pultrusion process,Uncontinuous winding Process & Laminates. Products Property: No any Binder, good compatible with Multi-Resin Optimal mechanical performance Easy workability and low cost Standard width: 120cm/127cm/160cm Max. width 320cm, Min. width 3.5cm Standard Roll weight: 45/48/60kg Packaging: Each roll is wound on paper tube (3"-4"Dia.) with plastic film and packed in individual cardboard box. 16 or 12 cartons per Pallet. The strength of fiberglass stitched mat is stronger than CSM,the price is cheaper. We export large quantity for pipe winding.We can provide big roll to reduce your replacing frequency and save your cost.We suggest stitched mat instead of chopped strand mat for pipe application. Use in close mold applications such as RTM, VARTM, SCRIMP. Can be pultruded when layered with other materials. Stitched construction allows for pattern or die cutting. Stitch Mat will not wash out in RTM process. and can be pre-wet and moved for proper placement in wet lay-up open molding. it gives uniform thickness compared to extra spray-up in open molding. it is low cost alternative for building thickness and stiffness, where the component is not weight critical. Binderless chopped E-Glass, stitched at 7 gauge The chopped strand length is 5cm or 10cm, 10cm for pultusion to improve the strength.
Fiberglass continuous mat provides fast, thorough wet-out.Use in close mold applications such as RTM, VARTM, SCRIMP. Can be pultruded when layered with other materials. Stitched construction allows for pattern or die cutting. And can be pre-wet and moved for proper placement in wet lay-up open molding... The chopped strand length is 5cm or 10cm, 10cm for pultusion to improve the strength. Properties: Fiberglass no certain direction,good homogeneity. No powder or emulsion,sink quickly and easy to operate. High tensile strength,esay to operate. Good impact strength of finished products.
Stitched fiberglass fabric (also called veilmat) is produced by stitching a polyester veil (tissue) to chopped strands. Polyester veil is around 45G/M2. Polyester veil has feature of anti-aging & water resistant, and also gives good surface to finished product. It is for pultrusion, especially for thin pultrusion product, closed mould process, or pipe winding. we export this materials to different countries like Exel composites in Australia, Iran, Ukraine, Italy, Malaysia and so on. Stitch type: Tricot stitch on veil side, pillar stitch on CS. The chopped length is 100mm. Gauge is F5(space between needles 7mm). Roll Length: Nominal linear 200meters +/-1m, the min width is from 150-3000mm.
Knitted mat is binderless characteristic, provides fast, thorough wet-out. Use in close mold applications such as RTM, VARTM, SCRIMP. Can be pultruded when layered with other materials. Stitched construction allows for pattern or die cutting. Stitch Mat will not wash out in RTM process. and can be pre-wet and moved for proper placement in wet lay-up open molding. it gives uniform thickness compared to extra spray-up in open molding. it is low cost alternative for building thickness and stiffness, where the component is not weight critical. Binderless chopped E-Glass, stitched at 7 gauge The chopped strand length is 5cm or 10cm, 10cm for pultusion to improve the strength
It is made of randomly yet evenly distributed chopped strands fiber of 50mm or 100mm length stitched by polyester thread. It has high tensile strength and is recommended for Pultrusion process,Uncontinuous winding Process & Laminates. Products Property: No any Binder, good compatible with Multi-Resin Optimal mechanical performance Easy workability and low cost Standard width: 120cm/127cm/160cm Max. width 320cm, Min. width 3.5cm Standard Roll weight: 45/48/60kg
Fiber Glass Tape as the name suggests, is a woven fiberglass fabric along with a pressure sensitive adhesive system. These are non-alkali taps that show thermal resistance and insulation. It wrapped around an exhaust system in order to retain the heat for longer and improve engine efficiency. fiberglass wrap tape commonly used in construction and repair projects to provide additional strength and stability to a structure.
1. Overview Spiral chute is a new type of gravity concentration equipment for separating 0.6-0.05mm (can separate 2mm material under special circumstances) fine particle ore, including iron, ilmenite, chromite, pyrite, tungsten, tin, tantalum-niobium, alluvial gold, zircon, rutile, monazite, phosphorus and other non-ferrous metals, rare metals, non-metallic minerals with specific gravity difference. Spiral chute with advantages of stable dressing, clear separating, large capacity, high efficiency, strong adaptability to feeding capacity, density, granularity, fluctuations of grade, simple installation, small footprint, simple operation, moisture-proof, antirust , corrosion, no power, no moving parts, no noise, etc., it is particularly suitable for placer extracting in seaside, river, sand beach, and stream. 2. Structure Spiral chute is mainly composed of 9 parts as the following picture shows. And its main six types of models are with diameters of 2000mm, 1500mm, 1200mm, 900mm, 600mm, 400mm(laboratory use).
Description The Carbon Fiber Sheet or Carbon Fiber Plate is manufactured using 100% carbon fiber reinforcement and epoxy resin. The surface can choose from will /plain, matte/glossy. without any glass fiber contents. It is especially applicable for the FPV frame, helicopters, and RC airplanes. We are able to do Carbon Fiber CNC cutting Parts for RC Helicopter, RC cars, UAV frame, drone frame, multi-copter frame, camera gimbal frame or others per your specifications. Our factory use imported Japan TORAY or Taiwan TAIRYFIL carbon fiber fabric to make the carbon fiber plates/carbon fiber sheets. Feature 1.High Strength, Light Weight, Environmental, Durable Nice Surface, Fashion 2.Low Coefficiency Of Thermal Expansion, High-Temperature Resistance 3.Good Tenacity, Good Toughness, Low Coefficiency Of Thermal Expansion Application 1. Aerospace, Helicopters Model Drone , UAVS, FPV, RC Model Parts 2.Manufacture Fixtures And Tooling, Industrial Automation And Robotics 3.Sports Equipment, Musical Instruments, Medical Device 4.Building Construction Repair And Strengthening 5.Car Interior Decoration Parts, Art Products 6.Others
Fiberglass cloth is wovend by E-glass fiber yarn, and the woven pattern is different, such as plain, satin, twill, leno. glass fiber are available in thickness ranging from 0.001'' to 0.06'', it can be found in window shades, vapor barriers, movie screen, packaging tapes, awnings, protective clothing, gasket, conveyor belt and countless other products that improve our lives daily.
the glass wool's good performance, e.G., thin and long inner fiber, low thermal conductivity, it can stop air flowing and heat transforming. Meanwhile, it can quickly reduce the transportation of sound to make effects of insulation and sound absorption. Type:centrifugal glass wool is divided into glass wool boards and glass wool blanket. Applications: It was the best material used for the insulation and sound absorption of steel structures. It mainly includes bare blanket with foil-clad covered. They are widely used in industrial plants, warehouse, public facilities, exhibition centre& ¤s, shopping centers, cold shores and a variety of indoor playgrounds, sports grounds and other buildings. Packing details:plastic bag, woven bag, pp/pe bag or as your specifical requirements In addition, we also have materials specially used for electrical insulation and insulation. If you are interested, you can contact lindymeng.
GRP Gel coated, high gloss and smooth finish. With mat and white. From 1.00 mm to 3.50 mm thick and from 1.6 m to 3.05 m wide. Length up to 60 meters. Other colors available on demand. Can be produced with or without Woven roving. Prices per m², according to composition, thickness, color and finish.
GRP Gel coated, matte and smooth finish. With mat in its composition. White color. From 1.00 mm to 3.50 mm thick and from 1.6 m to 3.05 m wide. Length up to 60 meters. Other colors available on demand. Can be produced with or without Woven roving. Prices per m², according to composition, thickness, color and finish.
