PFAD Is a by-product from refining Crude Palm Oil. It is a light brown solid at room temperature, melting to a brown liquid on heating. Palm Fatty Acid Distillate is used in soap industries, animal feed industries and as raw materials for oleochemical industries. Vitamin E can be extracted from PFAD. Specifications: Free Fatty Acids (as palmitic) 70% min Moisture & Impurities 1.0% max Saponifiable Matter 95% min(basis 97%)
PFAD Is a by-product from refining Crude Palm Oil. It is a light brown solid at room temperature, melting to a brown liquid on heating. Palm Fatty Acid Distillate is used in soap industries, animal feed industries and as raw materials for oleochemical industries. Vitamin E can be extracted from PFAD. Specifications: Free Fatty Acids (as palmitic) 70% min Moisture & Impurities 1.0% max Saponifiable Matter 95% min(basis 97%)
Palm Fatty Acid Distillate Saponifiable Matter 95% Min (basis 97%) M & I 1.0% Max FFA (as Palmitic) 70% Min We are manufacturer and producer of the RBD palm oil olein. Our RBD palm oil olein is well refined, well bleached and properly deodorized for human consumption and healthy for human health. We sell at a very low and good price and our oil is properly suitable for cooking and for frying. Description: RBD Palm Olein is obtained from fractionating refined palm oil to separate liquid parts (olein) from solid parts (stearin). It is a clear yellow liquid at room temperature. It is used as cooking oil as well as frying oil for food industries such as snack food and ready-to-eat-food. Application: Widely used as salad, cooking, frying cooking oil and much of its popularity is due to its good resistance to oxidation and formation of breakdown products at frying temperature and longer shelf life of finished product.
Specification Typical Values Acid Value (mg KOH/g) 203-209 Saponification Value (mg KOH/g) 204-210 Iodine Value (% I2absorbed) 45-56 Titre (oC) 45-48.5 Color (Lov, R/Y) 2.0/20 Max Moisture (%) 0.2 Max Composition (%) C12 1 Max C14 2 Max C16 43-48 C18 3-10 C18-1 37-40 C18-2 6-11 Others 1 Max Product Form Solid Packaging Drum; ISO; Flexibag; Bulk
One of the most well-known and sought-after byproducts of the refining process of vegetable (mostly sunflower) oil are fatty acids. Fatty acids, an industrial product with a GMP+ certification, are mostly used in the animal formula and feed sector. This is because adding fatty acids or fatty acid-based compounds to an animal feed ration can reduce feed costs. Fatty acids are crushed and processed through a whole cycle. In addition, they are utilized in the manufacturing of soap, glycerin, and stearin, as well as in the food processing industry as a direct formula component. Tocopherols.
1. What is PFAD PFAD stands for Palm Fatty Acid Distillate. It is a processing residue resulting from physical refining of crude palm oil products. At room temperature it is a light brow semi-solid, melting to a brown liquid on heating. Up to 80 percent of PFAD is free fatty acid (FFA), with palmitic acid and oleic acid being the major components. The remaining 20 percent is made up of components including triglycerides, partial glycerides, and vitamin E, sterols and squalene's. 2.How is PFAD used? PFAD is used as a renewable raw material in biofuels production as well as to produce candles, soaps, other oleochemical products, and animal feed. Specific to biofuel production in Europe, the EU allows Member States to account PFAD consumption towards greenhouse gas emissions reductions under its Renewable Energy Directive. The amount of emissions reductions depends on the PFAD technical classification, a residue or co-product, which is up to the individual Member State. To verify the emissions reductions, the EU relies on voluntary certification schemes, such as the International Sustainability and Carbon Certification system. 3.What are the benefits6 of using PFAD Producing renewable fuels using PFAD is good for the climate. It is an efficient way to use waste generated through the palm oil refining process, preventing PFAD from going to literal waste. A by-product that is undesirable from the food industry perspective can be very desirable for other sectors. Neste MY Renewable Diesel7 which is refined from PFAD and other waste and residue materials, such as Used Cooking Oil (UCO), helps to replace crude oil-based diesel in transportation. Using Neste MY Renewable Diesel can reduce greenhouse gas emissions by 90 percent on average compared to a diesel-powered vehicle using conventional fossil fuel-based diesel.
Tall oil fatty acids are used in dimer acids, alkyd resins, oilfield chemicals, metalworking fluids, liquid cleaners, textile chemicals, lubricansts,fuel additives, construction chemicals, rubber and tire, metallic stabilizers, printing ink, ore flotation, and fatty derivatives. Specifications Appearance: Yellow Liquid Acid Number: 193-200 Water: 0.5% Max IR: >0.9800 Packing 2,000 LB tote 400 LB drum, 4 drums per pallet
Palm Fatty Acid Distillate is manufactured from Crude Palm Oil refining. Good for Soap manufacturing and many other industrial uses. Contact us for technical specifications
Urja Shakti
CAS Number: 68308-53-2 Obtained by splitting and the subsequent vacuum distillation of soybean oil. The product obtained has a melting point above 25 C. Solid yellow or clear fluid at room temperature. Rich in linoleic acid and less in oleic acid. Soya Fatty acids are used among others application's: Amines, betaines, esters, fatty alcohols, lubricants, surface finishes, detergents, cosmetics and personal care, and solid liquid soaps, textile finishing, leather finishing, finishing fibers, coatings, resins, and surfactants.
CAS Number: 68424-45-3 It is obtained by splitting and the subsequent vacuum distillation of linseed oil. The product obtained has a melting point above 19 C. When in its liquid state it is pale yellow. Linolenic acid-richLinseed. Fatty acids are used among others aplications: Amines, betaines, esters, fatty alcohols, lubricants, surface finishes, technical detergents, liquid soaps and solids, textile finishing, leather finishing, finishing fibers, coatings, resins, surfactants.
CAS Number: 67701-05-7 Is obtained by splitting and the subsequent vacuum distillation of coconut oil. The product obtained has a melting point above 25 C. It is solid at room temperature, opaque white and with a pungent smell. Unlike other fatty acids, it is characterized by the presence of caprylic acid (up to 10%). Rich in lauric acid. Coconut Fatty acids are used among others applications: Amines, betaines, esters, fatty alcohols, detergents, cosmetics and personal care, soaps and liquid, textile finishing, leather finishing, finishing fibers, coatings, resins and surfactants.
CAS Number: 84625-38-7 Is obtained by splitting and the subsequent vacuum distillation of sunflower oil. The product obtained has a melting point above 20 C. When in liquid it is pale yellow. Sunflower Fatty acids are used among others applications: Amines, betaines, esters, fatty alcohols, lubricants, surface finishes, cosmetics and personal care, and solid liquid soaps, textile finishing, leather finishing, finishing fibers, coatings, resins, detergents and surfactants.
CAS Number: 67701-08-0 It is obtained by splitting and the subsequent vacuum distillation of rapeseed oil. The product obtained has a melting point above 15 C. When in liquid form, it is bright yellow and with a characteristic odour. Rich in oleic acid. Fatty acids are used, inter alia, in the following sectors: Amines, betaines, esters, fatty alcohols, lubricants, surface finishes, detergents, cosmetics and personal care, and solid liquid soaps, textile finishing, leather finishing, finishing fibers, coatings, resins and surfactants.
CAS Number: 67701-08-0 It is obtained by splitting and the subsequent vacuum distillation of rapeseed oil. The product obtained has a melting point above 15 C. When in liquid form, it is bright yellow and with a characteristic odour. Rich in oleic acid. Fatty acids are used, inter alia, in the following sectors: Amines, betaines, esters, fatty alcohols, lubricants, surface finishes, detergents, cosmetics and personal care, and solid liquid soaps, textile finishing, leather finishing, finishing fibers, coatings, resins and surfactants.
DCO Fatty Acid is used in the manufacture of alkyd resins for paint, surface coating, printing inks & polyamides. Packing : Bulk Tankers, Stainless Steel Drums, ISO Tank, Flexi tank, HDPE Closed Head Drums 190 Kgs Net. It is used Fast Drying Alkyde Resin.
Crude glycerin, pome, pfad, uco.One stop solution for both buyers and sellers to have smooth transaction, documentation, auditing and due diligence