1: Gearbox adopts oil lubricant design make maintain easy, and abrasion uneasy.
2: Crease free and easy folded with tubular fabric open width subsystem
3: High quality of cylinder with inserted trick walls and GROZ-BECKERT knitting needles used reduce wear
4:The no-crease open-width system: The machine adopts the latest winder system and is equipped with the roller shifting device to ensure the uniform stitch density of fabric. The operation is easy and convenient. It effectively removes creases in cloth caused by common winders, and makes it suitable for double air layer fabric material of chemical fibers and cotton, such as the high quality nylon, polyester and filament.
5: Combining the characteristics of double jersey and crease-free for cloths from knitting machines. High fabric output, equipped with a large diameter cylinder and high-speed motor; automatic cutting system to ensure unnecessary fabric loss.
6:Equipped with 2 tracks dial cams and 4 tracks cylinder cams, just change the camsâ?? arrangement, then you can change the fabric patterns to meeting the market need.
7: The material of cams is made by special imported heating disposal and designed by CAD/CAM to ensure the needle can running smoothly to prolong the needle life.
1: Main gear driving equipped with German ball bearings/wearing plate
2: Central Stitch Control Devices: Adjust the stitch length and GSM only by using hex wrench adjusting tuning knob
3: Cam box: Computer-milled grooves and numerical adjustment to provide precision. Use the single bevel screw to fix the cam holder to ensure the accurate position.
4: Cams made in house from Japanese alloy steel, Computer engraving, vacuum heat treatment, HRC confirms to standard.
5: Touch type control panel with high precision. Easy to be replaced and durable even in long time operation
6: Strong interchangeable cam and cam box satisfy different fabric structure.
7: Ease of maintenance, installed & changed by special designed system
8: knitting yarns used: viscose rayon, cotton, polyester, sensitive yarn etc.
9: Single Jersey Circular Knitting Machine Spec:
The open width circular machine use the cylinder four-track cam design. various kinds of single jerseys with high quality and distinct thicknesses could be knitted through arranging its cams and knitting needles in different ways.
By equipping open width fabric taken down device, the fabric can be cutted automatically on the machines. It makes sure the fabric to be more smooth and completely not have crease, wrinkles. Make sure the fabric can be used without waste, which can reduce the cost and enhance the profit.
The fabric taken down system equip drum speed transfer device, which makes the fabric in even and stable density. it's easy control and save time.
The cloth collecting stick can roll up cloth automatically, so as to process cloth in diverse sizes, even those which are too small to strain. The cloth-cutting machine is equipped with a roller speed adjustment device that guarantees a uniform and stable knitting tightness to the fabric.
1. The Jacquard machine selects needle in cylinder by using 3 ways actuator, which can make knitting stitch, tuck stitch, and miss stitch. Any complex fabric structure and patterns are converted into control procedures through the computer system, and save into disk input control system, saving the time of pattern changing.
2. Computer system reading patterns is easy to operate, quick and efficient.
3. Special single jersey jacquard fabric can be knitted and enable knitting factory to knit different pattern to enhance fabric value.
4. 3 Technology Electronic Needle Selection System: Its under needle cylinder is equipped with the 3 technology electronic needle selection plectrum. Through the computer control system, the operator can control looping, doubling stitch or loose stitch according to different needs. Adopt the advance Three - Way Technique computerized needle select system on cylinder, simply and quickly changing the knitting function - knit, tuck, and miss pattern at your ease
Name : 100% polyester bag sewing thread .
No.: ne20/6
Use : bag closing suite for bag sewing machine brand : newlong , fischbein , unionspecial, yaohan ect.
Weight per cone : 200g 1kg 2kg 3kg 5kg 8kg
Color : raw white / full color
Package : carton
High breaking force , knotless
We are manufacturer , also can supply 10/3 10/4 12/4 12/5 20/7 20/8 ect.
Name : 100% polyester bag sewing thread .
No.: ne12/4
Use : bag closing
Suite for bag sewing machine brand : newlong , fischbein , unionspecial, yaohan ect.
Weight per cone : 200g 1kg 2kg 3kg 5kg 8kg
Color : raw whit
E
Name : 100% polyester bag sewing thread .
No.: ne12/4
Use : bag closing suite for bag sewing machine brand : newlong , fischbein , unionspecial, yaohan ect.
Weight per cone : 200g 1kg 2kg 3kg 5kg 8kg
Color : raw white / full color
Package : carton
High breaking force , knotless
This machine is applicable to extending and heat setting of fabrics, such as pure cotton which gram per square meter is 50-400, polyester cotton and other blended fabrics. Equipped with mangle, it can also carry out other treatments like squeezing and resin padding.
Technical specification:
Machine width: 1800-3600mm
Machine speed: 20-120m/min
Heat source:thermal oil, gas, electricity or steam.
Fabric held by: pin,clip or pin/clip
This textile waste recycling machine uses high speed centrifugal force when operating to get rid of impurities in cotton and loosen the cotton at the same time.
This machine is mainly used to process all kinds of lint cotton, cloth clips, cloth corner, waste yarn, etc.
1. Overall dimensions: 4420mm*1500mm*1150mm
2. Output: 100-120kg/h
3. Capacity of removing impurities: 6%-10%
4. Cylinder diameter: 400mm
5. Cylinder rotation speed: 1st roller:1420rpm/min
2nd roller and 3rd roller: 1800rpm/min
6. Chain: t=19.5mm
7. Motor power: 11kw+7.5kw+5.5kw
This textile waste machine is mainly used to process all kinds of waste cotton, clips, leftover, waste yarn, thread, flock and flax.
This machine is SBT630 opening machine combined with model 1390 cotton recycling machine, which makes better fiber.
Overall dimensions: 12000mm*2300mm*1600mm
Weight: 14 tons
Output: 200-300kg/h
Motor power: 30kw+22kw for opening machine
15kw+11kw+7.5kw+7.5kw+7.5kw+7.5kw
Vertical and automatic hydraulic baling machine for raw cotton
This baling machine is designed as per our customers' requirements, having the features of high automation, labor cost and time saving.
It is mainly used in the package of raw cotton, waste cotton in the cotton mill and ginning plant. It is also can be used for packing some scraps and other soft goods.
This machine is easy to operate with automatically hydraulic packing device.
Overall dimensions:1440mm*690mm*4200mm
Machine weight: 2600kg
Packing size: 1000mm*500mm*800mm( can be changed)
Packing weight: 60-130 kg
Rated working pressure: 12Mpa
Packing pressure: 10Mpa
Motor power: 7.5kw
The stroke of oil cylinder: 1400mm
This machine is mainly used in pressing finished cotton after processing by cotton waste recycling machine. It also can be used in pressing cotton craps, clips, threads, car interior material, flax and papers.
This textile waste recycling machine uses high-speed centrifugal force when operating to get rid of impurities in cotton and at the same time loosen the lint cotton.
This machine is mainly to process all kinds of lint cotton, old quilt, cotton clips, landing cotton and flock etc.
Main technical parameters:
Output:100-120kg/h
Capacity of removing impurities:6%-10%
Diameter of cylinder:250mm
Rotation speed of cylinder: 1900 rpm/min
5 .Diameter of pressure cotton roll: 1400mm*985mm
6. Fan: 1.1kw
7. Rotation speed of fan: 2900rpm/min
8 chain: t=19.5mm
9. Model of taker-in: 5610*1.09*6 teeth/inch
Bearing of taker-in: 111308 dust cage double chain wheel:205
11. Motor equipped: 7.5kw and 5.5kw four grade
12. Overall dimensions:
Length: 3380mm width: 1500mm height: 1150mm
This textile waste recycling machine uses high-speed centrifugal force when operating to get rid of impurities in cotton and at the same time loosen the lint cotton.
This machine is mainly to process all kinds of lint cotton, old quilt, cotton clips, landing cotton and flock etc.
This textile waste recycling machine uses high-speed centrifugal force when operating to get rid of impurities in cotton and at the same time loosen the lint cotton.
This machine is mainly to process all kinds of lint cotton, old quilt, cotton clips, landing cotton and flock etc.
Dimensions:7540mm*1500mm*1150mm
Output:100-120kg/h
Cylinder diameter: 600mm for opener, 250mm for recycling machine
Motor power: 18.5kw+7.5kw+5.5kw+5.5kw+5.5kw+4kw+4kw
Vertical and automatic hydraulic baling machine for raw cotton
This baling machine is designed as per our customers' requirements, having the features of high automation, labor cost and time saving.
It is mainly used in the package of raw cotton, waste cotton in the cotton mill and ginning plant. It is also can be used for packing some scraps and other soft goods.
This machine is easy to operate with automatically hydraulic packing device.
Overall dimensions:1440mm*690mm*4200mm
Machine weight: 2600kg
Packing size: 1000mm*500mm*800mm( can be changed)
Packing weight: 60-130 kg
Rated working pressure: 12Mpa
Packing pressure: 10Mpa
Motor power: 7.5kw
The stroke of oil cylinder: 1400mm
Working width: 2000mm  2200mm  2500mm  Â
Diameter of polishing roller: Ï?370mm
Heating type: electrothermal tube
Temperature polishing of roller: 5~250°C±5°C
Delivery speed: 5~16m/min,inverters to adjust speed.
Rotary speed of front polishing roller: 915r/min
Rotary speed of rear polishing roller: 880r/min
Heating power: 2x49.2KW(2000mm)2x52.2KW(2200mm)Â Â Â
Total power: 121.4KW(2000mm)
127.4KW(2200mm)Â 137.9KW(2500mm)
307396 Fashion Accessories Suppliers
Short on time? Let Fashion Accessories sellers contact you.
